• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.72-79
• /
• 2014

The purpose of this study is to draw the improvement plan through the analysis of problems of main stretchers that are being used by the 119 EMS. In order to find out the problems, we used the literature review and analysis, survey questionnaire and we also made full use of KJ method (Kawakita Jiro method, affinity diagram), graph method, and priority matrix method to produce the improvement indicators. The problems of main stretchers are summarized as follows. they are being recognized as part of the emergency vehicle, they have the imperfection of performance verification criteria, and they cause the injuries of paramedics and patients accidents in operation. The indicators such as the ease of operation, the high performance, the multi-function, the driving performance, the durability and the lightweight, was produced to improve the problems. The results of the interconnection analysis and the applying priority matrix method on the indicators are the ease of operation ${\rightarrow}$ the multi-function ${\rightarrow}$ the driving performance ${\rightarrow}$ the high performance ${\rightarrow}$ the durability and the lightweight in order of importance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.202-211
• /
• 2002

Because wireless links are subject to disturbances and failures, it is important to support disconnected operations in mobile computing. Many schemes have been proposed to support the efficient disconnected operations. In this paper, we analyze and measure the computation time including disconnected operations to evaluate the performance of mobile computing on error prone wireless links. Mobile computation consists of three states: data hoarding, disconnected operation, and block states. We estimate the computation time using various parameters; error rate and recovery rate of wireless link, hoarding overhead, logging overhead, and reintegration overhead, etc. We can choose efficient strategies for disconnected operations and predict the performance using the results of this analysis.

• Tribology and Lubricants
• /
• v.28 no.5
• /
• pp.197-202
• /
• 2012

In this study, with the purpose of fundamentally improving the unbalance response vibration of a large PRT motor-generator rotor by design, a performance improvement design analysis is carried-out by retrofitting tilting pad bearings, replacing the plain partial journal bearings that were originally applied for operation at a rated speed of 1,800 rpm. In this process, a goal of the design analysis is to obtain a design solution for maximizing the direct stiffness of the bearings while satisfying the key basic lubrication performance requirements such as the minimum lift-off speed and maximum oil-film temperature. The results show that with a careful design application of tilting pad journal bearings for operation at such a relatively low speed of 1,800 rpm, direct stiffness increment of the bearings by about two times can be effectively achieved. Prevention of pad unloading is also considered in the analysis. Moreover, the designs of elliptical and offset half journal bearings are also analyzed and reviewed.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.50-57
• /
• 1995

In this paper the model was analyzed on performance evaluation for IN facility and we carried out evaluation on it's service performance using this model as an example. We used simulation method and operation analysis method as evaluation technology. As the evaluation results, the case of simulation method was nearly consistent with the case of the operation analysis method and the user-network interaction time had more effect on service performance than delay time of IN facility. We expects that the performance models proposed in this paper is useful when operating, managing and designing IN services in considering service performance.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.18-24
• /
• 2012

This study simulated the operation of a steam injected gas turbine combined heat and power (CHP) system. A full off-design analysis was carried out to examine the change in the turbine blade temperature caused by steam injection. The prediction of turbine blade temperature was performed for the operating modes suggested in the previous study where the limitation of compressor surge margin reduction was analyzed in the steam injected gas turbine. It was found that both the fully injected and partially injected operations suggested in the previous study would cause the blade temperature to exceed that of the pure CHP operation and the under-firing operation would provide too low blade temperature. An optimal operation was proposed where both the turbine inlet temperature and the injection amount were modulated to keep both the reference turbine blade temperature and the minimum compressor surge margin. The modulation was intended to maintain a stable compressor operation and turbine life. It was shown that the optimal operation would provide a larger power output than the under-firing operation and a higher efficiency than the original partially injected operation.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.58-62
• /
• 2016

The satellite propulsion system provides the required thrust to insert a satellite into the desired orbit after separation from the launch vehicle and to control orbit inclination or compensate altitude loss due to drag after inserted into the desired orbit. The on-orbit performance of LEO satellite propulsion system according to operation mode was verified based on the results analysis for early on-orbit operation. The temperature trends of components and tubing were checked and the resultant trends were within the normal range as well.

• Journal of agricultural medicine and community health
• /
• v.47 no.4
• /
• pp.275-282
• /
• 2022

Objective: This study intends to analyze the performance of LINC+ program for three years of the dental hygiene department at Ulsan college and to present the direction for the operation of the LINC 3.0 project to be conducted for 6 years. Methods: A survey was conducted on 87 human resources officers participating in the LINC+ project of dental hygiene department from July 2021 to August 30, 2021, and the IBM SPSS Statistics 24.0 program was used for data analysis. Results: In terms of the suitability of the curriculum, operation of clinical practice averaged 4.82 points and omnibus courses averaged 4.77 points, and it was identified that OJT course, clinical practice, and educational environment make effects on job adaptation period, education and training period, and the reduction of education and training costs(p<0.05). Conclusion: In order to produce graduates who are highly adaptable in the field, participation of industries in the development and operation of the curriculum must be expanded and jointly operated, and it was possible to confirm the importance of the same educational environment as the industry to shorten the job adjustment period.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.394-401
• /
• 2020

Purpose: The present study is an analysis of the extents of class satisfaction of college students who had applied the design thinking technique to capstone design class. Methods: The experimental method involved an analysis of 122 cases of data where advance and post replies were performed for the subject by students who had applied the design thinking technique and students who had not. The students involved had attended the capstone design class as a junior in the Department of Dental Technology at D University. Results: In the satisfaction with performance process of the capstone design class, five questions among nine had a high positive rating, while all eight questions on the satisfaction with performance methods had a high negative rating. Among ten questions on subjective learning outcomes, six showed a high positive rating. After the application of the design thinking class method, all mean values of the group with the application were higher than the group with no application in satisfaction with performance process, satisfaction with performance method, and subjective class outcomes. Hence, the design thinking class did have positive effects on the students' improvement of class. Conclusion: Based on the results of the study, it is implied that the considerations about diverse class composition methods and operation methods capable of improving the students' satisfaction are needed for efficient operation of the capstone design class.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.147-147
• /
• 1998

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.145-145
• /
• 2001