• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.187-189
• /
• 2022

As the structure and operation method of MASS(Maritime Autonomous Surface Ship) are discussed accroding to the IMO degree, the interest and necessity for remote operators who manage and supervise the operation of MASS are increasing gradually. The form of MASS operation is clearly accompanied by various changes including new technologies and equipment in comparison with the current operation of ship. In IMO Degree 2 and 3, the capabilities that remote operators who will operate them must differ from those of existing seafarers(navigation officers, engineers and ratings). Regarding this remote operation, the NI(Nautical Institute) is the first in the world to present a syllabus and a curriculum of qualification for remote operator. Based on this, the paper introduces and compares the education model of MASS remote control operation and NI model, and further uses it as basic data for the creation of curriculum for future MASS remote operator.

• Fisheries and Aquatic Sciences
• /
• v.3 no.2
• /
• pp.156-162
• /
• 2000

Model experiments for a purse seine were carried out in order to measure the geometry of net shape and to estimate an enclosed volume by using 1177 scale model purse seine of 12.62m float line from an offshore mackerel purse seine. A model purse seine was set from a net box of shooting equipments and then pursing and hauling net by hauling equipment. The 3- D geometry shape of the purse seine net during hauling operation was measured by video image processing and tension of purse line by load cell. The 3-D geometry of the model purse seine during hauling operation could be represented with variables such as a ratio of shooting diameter or maximum net depth and a ratio of hauling operation time. Horizontal shapes of float line and lead line were varied from a circle after shooting to an ellipse with pursing and hauling. Projected lateral shape of purse line was observed and formulated as a shape of a water drop. The cross sectional shapes of curved net from two directions were varied such as sine function or polynomial curves. Therefore, enclosed volume of a purse seine in relation to fish school behaviour can be approximated using two main variables from relevant equations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.830-837
• /
• 2011

A turbine control system which has been operated for years in a nuclear power plant was retrofitted with a newly developed digital control system. After completion of the retrofit, turbine valve tests were performed to ensure the integrity of each valve's control function. The sequence of each valve test is composed of a closing process and a reopening process. To minimize megawatt variation which normally occurs during the test sequence, we employed a kind of compensator algorithm in the new digital control system which also have been used in the old system. There were difficulties finding optimal parameter settings for our new compensator algorithm because the power plant didn't allow us to perform necessary tuning procedures while the turbine is on load operation. Therefore an alternative measure for the compensator tuning which is independent of the turbine actual operation had to be implemented. So, a process model for the test was required to overcome this situation. We analyzed the operation data of the test and implemented the process model by use of input and output variable relations. Also we verified the process model by use of another condition's operating data. The result shows that the output of model is similar to the actual operation data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.38-48
• /
• 2007

this paper analyses how much acceleration and deceleration of urban rail vehicle should be applied and how to choose an operation mode to minimize energy consumption when train runs between stations within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verity the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between stations of Seoul Metropolitan Subway Line 6.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.115-117
• /
• 2012

Task based modeling is essential in a construction operation simulation modeling. It allows dealing with local variables or delay factors that affect productivity and improves the reusability of existing operation models. An operation model can secure reality only if it reflects the real construction processes by effectively dealing with zoning issue. However, system users have some difficulties in modeling a construction operation that is consisted of several processes having different production units. Zoning is a major modeling issue when the task based modeling method is implemented using the existing discrete event simulation systems. This paper highlights the difficulty and presents a new method that complements the zoning issues attributed to different production units. The method is described in detail by presenting the flow of entities. It is confirmed that the zoning method effectively deals with the unbalance of production units between processes and facilitates to model an operation model having processes with different production units. The "Zoning module" contributes to increasing accuracy of simulation result.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.228-230
• /
• 2008

The response time characteristic of low voltage liquid crystals (LCs) is investigated and a new simulator for low voltage LCs is proposed. In order to enable low voltage operation, it is important to minimize Vth of LCs and variation of pixel voltage caused by dynamic capacitance operation of LC Display. Because dynamic capacitance variation is much larger for low voltage LC operation compared to that of conventional LC material, it is necessary to make a better model for dynamic capacitance operation. A proposed minimizing Vth of LCs and variation of pixel voltage study results through a new constant charge model improve response characteristics for low voltage LCs operation.

• Korea Journal of Hospital Management
• /
• v.25 no.4
• /
• pp.60-75
• /
• 2020

Purpose: This study aims to develop a cost model for NRP (Nursing Residency Program) operation and ultimately provide evidence for financial factors for NRP operation in the future by simulating a cost model. Methodology: This study developed a model for the NRP education cost calculation model based on the review of Hansen's model, which has systematically reported on the development and operation of NRP, and discussions with nursing education experts at a university-affiliated hospital. With the simulation, it was intended to predict nurses' supply and demand in the long term and to calculate changes in long-term education costs. Findings: Firstly, turnover model, term model, cost model necessary for calculating a model for the NRP education cost calculation model was set up. Secondly, the simulation showed the following results; 1) the proportion of newly graduated nurses less than 5 years of working decreases gradually over time, which will make the composition of nurses more balanced. 2) In the first year of the partial introduction of NRP, the cost of training new nurses was about 2.1 times higher than before. After the introduction, the training cost in the 13th year began to be lesser than before the introduction, and in the 25th year, it decreased by 28.1% compared to before the introduction. Practical Implications: Firstly, NRP would be an effective way to solve the higher turnover and frequent departure of new nurses and the imbalance of nurses' composition. Secondly, although the costs of NRP are incurred in the early stages, in the end, NRP training costs are reduced compared to before the introduction of NRP. It is necessary to systematically understand the contribution effect of NRP by analyzing the economic value of NRP considering financial and non-monetary returns in the future and providing a basis for decision-making related to NRP implementation.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.73-82
• /
• 2000

This study was implemented to find an optimal model for wastewater treatment processes using PHOENICS(Parabolic, hyperbolic or Elliptic Numerical Integration Code Series) and ASM(Activated Sludge Model). PHOENICS is a general software based upon the laws of physics and chemistry which govern the motion of fluids, the stresses and strains in solids, heat flow, diffusion, and chemical reaction. The wastewater flow and removal efficiency of particle in two phase system of a grit chamber in wastewater treatment plant were analyzed to inquire the predictive aspect of the operational model. ASM was developed for a biokinetic model based upon material balance in complex activated sludge systems, which can demonstrate dynamic and spatial behavior of biological treatment system. This model was applied to aeration tank and settling chamber in Choonchun city, and the modeling result shows dynamic transport in aeration tank. PHOENCS and ASM could be contributed for the optimal operation of wastewater treatment plant.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.199-204
• /
• 2000

A low temperature differential model stirling engine is manufactured, and its operation characteristics are measured and analyzed by SIMPLE analysis model, in which heat transfer processes are simply considered. The heat transfer coefficients between working fluid and heat sources in the analysis are estimated by comparing the P-V diagrams by experiment and by analysis. This result may be very useful for further design and manufacture of model Stilting engines as well as real engines because it provides a comparatively correct predictions of the operation conditions and power output. It will be also conveniently used as an educational material for mechanical engineering students because it can be a nice example of optimal design process to decide the phase angle and compression ratio of engine design with a simple but realistic simulation.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.92-98
• /
• 2000

Modern manufacturing systems should cope with the frequent changes in a product model and disturbances in manufacturing process. The control system of such systems must cover a constant adaptation and high flexibility. Holonic Flexible Manufacturing Cell(HFMC) is introduced to handle these issues more successfully. It is based on the concept of autonomous co-operating agent, called 'Holon', which is a building block of a manufacturing system for transforming, transporting, storing and/or validating information and physical objects. In this paper the basic structure of the HFMC is represented by using Unified Modeling Language and Open architecture cell controller is developed for effective integration components of a manufacturing system. Also a new control model, called MuLOM(Multi-Layered Operation Model), is suggested to represent the control behaviour for a holonic flexible manufacturing cell control system.