• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.243-248
• /
• 2007

The durability of a cylinder head is influenced by the thermal and mechanical history during the manufacturing process, as well as engine operation. In order to improve the durability of cylinder head, both load from engine operation and the preload conditions from the manufacturing process must be considered. The aluminum cylinder head used for a HSDI diesel engine is investigated to reduce the possibility of high cycle fatigue crack in this study. FE analysis is performed to elucidate the mechanism of high cycle fatigue crack in the HSDI diesel cylinder head. Two separate approaches to increase the durability of the cylinder head are discussed: reducing load from engine operation and re-arranging preload conditions from the manufacturing process at the critical location of the cylinder head. Local design changes of the cylinder head and modification of pretension load in the cylinder head bolt were investigated using FE analysis to relieve load at the critical location during engine operation. Residual stress formed at the critical location during the manufacturing process is measured and heat treatment parameters are changed to re-arrange the distribution of residual stress. Results of FE analysis and experiments showed that thorough consideration of the manufacturing process is necessary to enhance the durability of the cylinder head.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.40-48
• /
• 2019

Hybrid electric propulsion systems (H-EPSs) are an intermediate step for integrated full electric propulsion warships. H-EPSs are a dynamic combination of mechanical and electrical propulsion systems to achieve the required mission performances. The system modes could adapt to meet the requirement of the various operation conditions of a warship. This paper presents a configuration and operating modes of H-EPSs considering the operation conditions of a destroyer class warship. The system has three propulsion modes, namely, motoring mode, generating mode [power take off (PTO) mode], and mechanical mode. The PTO mode requires a careful fuel efficiency analysis because the fuel consumption rate of propulsion engines may be low compared with the generator's engines depending on the loading power. Therefore, the calculation of fuel consumption according to the operating modes is performed in this study. Although the economics of the PTO mode depends on system cases, it has an advantage in that it ensures the reliability of electric power in case of blackout or minimum generator operation.

• 한국수소및신에너지학회논문집
• /
• 제32권3호
• /
• pp.149-155
• /
• 2021

Most of the reformer experiments have been conducted only in high-temperature operation conditions above 700℃. However, to design high efficiency solid oxide fuel cell, it is necessary to test actual reaction performance in mid-temperature (550℃) operation areas. In order to study the operation characteristics and performance of commercial reforming catalysts, a reforming performance experiment was conducted on mid-temperature. The catalysts used in this study are Ni-based FCR-4 and Ru-based RuA, RuAL. Experiments were conducted with a Steam-to-carbon ratio of 2.0 to 3.0 under gas hourly space velocity (GHSV) 2,000 to 5,000 hr-1. As a result, RuA and RuAL catalysts showed similar gas composition to the equilibrium regardless of the reforming temperature. However, the FCR-4 catalyst showed a lower hydrogen yield compared to the equilibrium under high GHSV conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.805-807
• /
• 2004

Dual Mode technology has been developed as a new technology that allows to use a self-emissive display under full sunlight conditions. The new technology connects a LCD-like remissive operation mode in sunlight to an OLED-like self-emissive operation in the dark In the recent years, the focus of development has shifted towards the possibility of full colour operation.

• 대한전기학회논문지
• /
• 제38권8호
• /
• pp.585-592
• /
• 1989

This paper presents an efficient algorithm for the reactive planning of transmission network under normal operating conditions. The optimal operation of a power system is a prerequisite to obtain the optimal investment planning. The operation problem is decomposed into a P-optimization module and a Q-optimization module, but both modules use the same objective function of generation cost. In the investment problem, a new variable decomposition technique is adopted which can operate the operation and the investment variables. The optimization problem is solved by using the gradient projection method (GPM).

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.22-28
• /
• 2006

Operation of a microturbine was simulated on the basis of component characteristic parameters obtained from performance test. Characteristic parameters, such as compressor and turbine efficiencies, recuperator effectiveness as well as turbine inlet temperature, were obtained for a wide operation range. Component characteristics including performance maps and characteristic curves were generated using measured data. Based on the component characteristics, a simulation program was constructed and operation of the microturbine was simulated, and the simulated results were compared with the measured data to verify the program. Also, influence of variation in the power control scheme on the operating characteristic and performance of the engine was simulated. The simulation program can be used for predicting operation of both healthy and degraded engine conditions.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.781-790
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. Many of the problems occurring in the GAC process are associated with the operation goal and performance. The purpose of this study were to evaluate the design, operation, and performance of granular activated carbon process in D water treatment plant. The optimal operation conditions of GAC process such as backwashing condition, granular activated carbon replacement time were discussed. The design, operation and performance of GAC process is influenced by their raw water characteristics and placement within the treatment process sequence. A critical analysis of plants experience and the information from the literature identifies the effectiveness of GAC process and indicates where modifications in design and operation could lead to improved performance. It would be useful to evaluate and optimize the GAC process in other treatment plant.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.246-254
• /
• 2010

This paper presents a multiagent system for microgrid operation in the grid-interconnected mode. An energy market environment with generation competition is adopted for microgrid operation in order to guarantee autonomous participation and meet the requirements of participants in the microgrid. The modified Contract Net Protocol (CNP) is used as a protocol for interactions among agents. The multiagent system for microgrid operation based on the modified CNP and the energy market environment is designed and implemented. To verify the feasibility of the suggested multiagent system, experiments on three operation conditions are carried out.

• 해양환경안전학회지
• /
• 제26권6호
• /
• pp.634-643
• /
• 2020

해양공간 이용 수요와 중요도의 지속적인 증가에 따라 국내에서의 해양탐사 및 해양조사활동이 활발히 수행중이다. 이러한 활동을 위해 운항되는 해양탐사조사선은 목적 및 탐사선박에 따라 특수한 운항패턴을 가지므로 해상교통위험도를 고려한 연구가 필요하다. 본 연구에서는 해양탐사·조사선의 운항이 해상교통에 미치는 영향을 각 요인별 상관관계로 파악하고자 하였다. 우리나라에서 활동중인 해양탐사·조사선 현황을 파악하였고 일부 해양물리탐사선의 특수한 운항실태를 식별하였다. 운항자부담감의 결과를 비교하기 위해서 운항요인 중 각 2가지를 독립변수로하여 ES Model 기반의 해상교통류시뮬레이션을 수행하였다. 분석결과 교통량, 선박 길이, 속력 순으로 운항자 부담감이 두드러지게 변화하는 것을 확인하였다. 또한 인근 해상교통흐름과 선수방위(침로)가 거의 유사한 운항 침로를 설정할 경우 운항자 부담감이 다소 감소하는 것을 확인하였다. 이에 따라 해양탐사·조사선이 운항계획을 설정할 단계에서 인근 해상교통현황을 파악하여 운항방식에 반영한다면 운항자 부담감을 감소시키는데 기여할 것이다.

• 대한교통학회지
• /
• 제23권2호
• /
• pp.131-142
• /
• 2005

버스 운행 정시성은 운행계획에 따라 정시에 운행하는 정도를 나타낸다. 이용자의 대기시간은 버스 운행의 정시성에 직접적으로 영향을 받기 때문에 정시성지표는 이용자 관점에서 버스 운행의 신뢰성을 평가하는 지료로 가장 널리 사용되는 평가척도 중 하나이다. 그러나 실제 버스 운행은 도로여건, 교통상황, 승객수요 등 여러 가지 상황에 의해 사전에 작성된 운행 계획을 준수하지 못하게 된다. 따라서 여러 가지 상황에 따라 버스 운행의 정시성을 평가할 수 있는 정시성 지표를 개발하여 제시한다. 또한 서울시에서 운행하는 여러 버스 노선의 운행 자료를 분석하여 정시성 지표를 산출하였으며 이를 통해 여러 가지 운행 여건에 따른 정시성지표의 변화 특성을 분석하였다.