• Journal of Astronomy and Space Sciences
• /
• v.31 no.1
• /
• pp.67-72
• /
• 2014

The next generation small satellite-1 (NEXTSat-1) program has been kicked off in 2012, and it will be launched in 2016 for the science missions and the verification of space core technologies. The payloads for these science missions are the Instrument for the Study of Space Storms (ISSS) and NIR Imaging Spectrometer for Star formation history (NISS). The ISSS and the NISS have been developed by Korea Advanced Institute of Science and Technology (KAIST) and Korea Astronomy and Space science Institute (KASI) respectively. The ISSS detects plasma densities and particle fluxes of 10 MeV energy range near the Earth and the NISS uses spectrometer. In order to verify the spacecraft core technologies in the space, the total of 7 space core technologies (SCT) will be applied to the NEXTSat-1 for space verification and those are under development. Thus, the operation modes for the ISSS and the NISS for space science missions and 7 SCTs for technology missions are analyzed for the required operation time during the NEXTSat-1's mission life time of 2 years. In this paper, the operational concept of the NEXTSat-1's science missions as well as the verification of space core technologies are presented considering constraints of volume, mass, and power after launch.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.73-80
• /
• 2020

Due to the expansion of cyber space, war patterns are also changing from traditional warfare to cyber warfare. Cyber warfare is the use of computer technology to disrupt the activities of nations and organizations, especially in the defense sector. However, the defense against effective cyber threat environment is inadequate. To complement this, a new cyber warfare operation concept is needed. In this paper, we study the concepts of cyber intelligence surveillance reconnaissance, active defense and response, combat damage assessment, and command control in order to carry out cyber operations effectively. In addition, this paper proposes the concept of cyber warfare operation that can achieve a continuous strategic advantage in cyber battlefield.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.43-49
• /
• 2005

Social interest and request about low pollution waste treatment process are growing and gasification melting method, as a new technology concept, is risen. The necessity of engineering analysis to determine design standards and operation condition is required. In this study, the objective and function of components and operation process of various gasification melting furnaces such as shaft type, fluidized bed and Rotary Kiln type gasification melting furnace are reviewed and the design standard and operation range of gasification melting furnace are determined by inspecting the change of output and operation condition with input condition change.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.522-527
• /
• 2004

Nowadays, becoming wide area is going on over Seoul Metropolitan area. But urban railway, very important traffic facilities, is operated in normal operating position and it gives cause to week the function of commuting long distance. This paper is focus on studying the feasibility of rapid operation system in Seoul Metropolitan area through comparing the present state of urban railway in Seoul Metropolitan area with a case of the advanced facilities in developed country. And we develop rapid operation system in general aspect through only consideration of operation planning without improvement of facilities. Also, we come up with new concept of rapid operation system through investigation of limits of the preceding researches

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.2
• /
• pp.111-116
• /
• 2021

Normal Operation Safety Survey (NOSS) is a safety management tool used by air traffic control organizations to measure data related to threats and errors to proactively prevent accidents before they occur. NOSS was developed to be applied to the air traffic control field according to the concept of Line Operation Safety Audit (LOSA) conducted by airlines to reduce human errors in the cockpits. Safety management based on data is crucial for the prevention of control-related accidents, and the competency of observers for this is important for the successful implementation of NOSS. Based on LOSA implementation experiences and expert interviews, this paper introduces the international NOSS methods and discusses the key factors required for effective observation and the implementation methods and implications of NOSS observer training.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.1
• /
• pp.79-91
• /
• 2023

In response to the recent surge in aviation demand, major airports and aviation authorities continue to make efforts to formulate arrival and approach procedures that take into account efficient aircraft separation, noise and environmental issues of carbon (CO2) emissions. In order to ensure efficient traffic control and environmental issues, as a result, a new concept Trombone, Point Merge, etc. have been introduced and widely used in the domestic airspace. However, these new concept procedures which do not properly reflect the characteristics of the aircraft operation performance and the FMS vertical descent guidance hinder flight efficiency as well as bring in turn negative factors such as level-off flight and the use of drag device at the busiest phase of the flight descent operation, like the Continuous Descent Operation (CDO). Accordingly, throughout modification the current Standard Terminal Arrival Route (STAR) and Instrument Approach Procedure(IAP) that reflect the aircraft descent performance and the FMS guidance, the flight operation safety and efficiency is expected to be improved eventually. We herewith analyze and propose the way of improving flight efficiency in the arrival operation procedure by supplementary modification which consequently contribute to the aviation industry international competitiveness.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.387-392
• /
• 2012

This paper discusses the concept of merging multiple sources of data on the same 2D CAD drawing(s) for power plant operation. It also presents the concepts and tools used in this project.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.91-94
• /
• 2007

We introduce the inline type mass production tool for the large size lighting OLEDs and flexible OLEDs. The manufacturing tool includes the linear belt source what is new concept for the organic deposition processes and the deposition operation combines directly to the encapsulation operation in a tool. The linear belt source evaporation in deposition processes is performed during the substrate transferring to innovatively improve the productivity in manufacturing.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.283-288
• /
• 2001

This study provides analytical evaluation of the Dual-Ann Work Module. The current hydraulic system was modeled using the HyPneu and analyzed to find the cause of the instability. The cause of the instability was determined to be primarily an interacting involving the pilot operated check valves and the counterbalance valves for fail safe mode of operation. A new design concept was developed to eliminate the potential for unstable operation while adequately meeting the need for a fail-safe feature.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.60-75
• /
• 2005

The remote operation of the Advanced Spent Fuel Conditioning Process (ACP) is analyzed by using the 3D graphic simulation tools. The ACP equipment operates in intense radiation fields as well as in a high temperature. Thus, the equipment should be designed in consideration of the remote handling and maintenance. As well as suitable remote handling and maintenance method needs to be provided. To provide such remote operation technology, we developed the graphic simulator which provides the capability of verifying the remote operability of the ACP without fabrication of the process equipment. In other words, by applying virtual reality to the remote maintenance operation, a remote operation task can be simulated in a computer, not in a real environment. In this way the graphic simulator can substantially reduce the design cost of the remote operation process and the equipment. Also it can provide new operation concept that is more reliable, easier to implement, and easier to understand.