• Journal of the Korea Organic Resources Recycling Association
• /
• 제27권1호
• /
• pp.33-38
• /
• 2019

This study refers to the deodorization of DDM Environmental Resource Center, which is operating abnormally in the food waste public-resource facilities that are operating nationwide, in accordance with the initial operating conditions. Issues concerning the abnormal deodorization facilities of DDM Environment Resource Center were the deodorization of composting facilities, indoor air quality problems, and overall deodorization of facilities, especially the phenomenon of stopping while operating the RTO and the phenomenon of poor spray in the wet scrubber etc. As an alternative and improvement method for converting such abnormal operation facilities into normal operation facilities, It is proposed to remove the front filter of the upper part of the fermentation tank, and to install scrubbers, air and water separator, and roll filters for dust removal etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제28권2호
• /
• pp.346-353
• /
• 2022

Recently, studies on the integrity of rotating machines, such as gantry cranes, which are used in the shipbuilding industry, have been actively conducted. Gantry cranes are driven at relatively low revolutions per minute (RPM), are frequently operated and stopped, and are impacted by external environmental factors, such as shock and noise in the measurement data. The purpose of this study was to construct a replica of a gantry crane hoist used in indoor shipbuilding and analyze the acquired data for errors caused by the shift in operating conditions (RPM) and the change in the position of the data acquisition sensor. Consequently, we observed that the error caused by differences in sensor positions did not occur significantly under low operating conditions but occurred significantly under relatively high operating conditions. Thus, we determined that both the operating condition and position of the acquisition sensor affected the data acquired by the rotary machine.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38B권1호
• /
• pp.54-62
• /
• 2013

In this paper, we propose an experimental environment which can be accessed by remote users, where they can select their preferred operating system, and they can use the Power Controllable systems with full permission to access them. The goal of the proposed systems is to provide an experimental environment for the users to join the international experiment that needs high bandwidth network. In order to do that, we provide high performance systems that is directly connected to back-bone network, and we also provide the ability of users to install any application on various operating system. In addition, we provide the ability to keep continuing the system environment of users in shared system environment. We will show how the proposed systems are useful for the users in terms of the user-efficiency to utilize the environment and the response time for the set-up time. This new proposed environments will provide a new experimental method for the scientists who works for international collaborative experimental researches.

• Journal of Aerospace System Engineering
• /
• 제16권6호
• /
• pp.90-98
• /
• 2022

The output of an infrared (IR) sensor mounted on an EO/IR payload is known to change during a mission period in an orbital environment. As it is required to calibrate the output of the IR sensor periodically to obtain high-quality images, an on-board black body system is mounted on the payload. All systems operating in the space environment require performance tests on ground to verify the target performance in the orbital environment. Therefore, it is also required to test the black body system to verify the performance of the surface temperature uniformity and the estimated representative temperature error within the target temperature range in the operating environment. In this study, calibration of the estimated representative temperature error and verification of the thermal performance of the black body system were conducted by performed a performance test in the thermal vacuum chamber applying deep space radiation cooling effect of an orbital environment.

• Journal of vocational education research
• /
• 제37권2호
• /
• pp.101-127
• /
• 2018

The purposes of this study are to study out competencies of teacher for organizing and operating of NCS based curriculum in vocational high schools, and to analyze the relative importance of the competencies. The results of the study are as follows. Firstly, the competencies of teacher for organizing and operating of NCS based curriculum are composed of the following 4 areas, 11 competencies and 35 sub-competencies. 'Needs and learning environment analysis(area 1)' is composed of 2 competencies of 'analyzing needs', 'analyzing learning environment', and their 7 sub-competencies. 'Curriculum organization(area 2)' is composed of 4 competencies of 'organizing and operating curriculum committee', 'setting educational goals and workforce type', 'analyzing and selecting NCS competency units learning modules', 'developing subjects', and their 10 sub-competencies. 'Curriculum operation(area 3)' is composed of 3 competencies of 'preparing teaching-learning activities', 'implementing teaching-learning activities', 'evaluating teaching-learning activities', and their 15 sub-competencies. 'Curriculum evaluation and feedback(area 4)' is composed of 2 competencies of 'evaluating curriculum', 'giving feedback on the curriculum', and their 3 sub-competencies. Secondly, the relative importance of the competencies is as follows; 'implementing teaching-learning activities' has the highest relative importance of 19.6%, followed by 'evaluating teaching-learning activities'(14.2%), 'evaluating curriculum'(12.5%), 'giving feedback on the curriculum'(11.2%), 'preparing teaching-learning activities'(9.2%), 'developing subjects'(8.6%), 'analyzing and selecting NCS competency units learning modules'(7.5%), 'setting educational goals and workforce type'(6.6%), 'analyzing learning environment'(5.4%), 'analyzing needs'(3.9%), 'organizing and operating curriculum committee'(1.5%).

• Proceedings of the KSR Conference
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.737-747
• /
• 2011

5678SMRT has installed various sensor for operating conditions(field of electric, facilities, signal, communication equipment and track) and environment of Every Function Room for remotely detecting and monitoring. Installed sound sensor for analyzed after remotely heard the noise of every equipment at Every Function Room and temperature sensor for check the temperature condition of Every Function Room. Additional installed voltage sensor in signal equipment room for monitoring RF track-circuit's voltage condition. Installed displacement sensor at The Chungdam bridge's railway for measuring and monitoring track displacement caused by temperature change and Pan/Tilt camera at sub-station and drainage for remotely field monitoring. Installed sensor for each equipment's operating condition and failure at Every Function Room then periodic check of workforce turned to around-the-clock surveillance by sensor therefore improvement of operating equipment. SMRT is lots of prevent a failure by Immediately detect of precondition of equipment failure by analyzed the sensor data. If the occurrence of an failure, become detected Immediately so possibility correct diagnosis and order by remotely field check by installed camera and sound sensor at field.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.189-194
• /
• 2002

As a environment of SCM is issued recently, many enterprises are concerned about inventory control for an efficiency of operation and reliablity. The goal of them is to match up to improving of facilities and redoing of inventory cost. To put an efficiency in the operation rate of facilites, A moderate provision of spare parts for that would come into a matter. This study designs two-echelon spare parts distribution system and sees over the relationship between operating rate and inventories of spare parts. and then it determines fitting inventories and investment cost considering an operating rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.291-296
• /
• 2001

The computerized automation of modern manufacturing system is tremendously important for the cost reduction. Recently, the automation is being realized by Computer Integrated Manufacturing (CIM) concept and the unmanned factory is the final goal of the automation. The automation of the low level of factory is the most crucial and difficult aspect in total CIM environment since various machines are involved. A cell is defined as a manufacturing group of closely related machineries in the entire factory hierarchy, The management scheme for a cell controller is defined from the software viewpoint. The domain of a cell is designed with tasks(processes) in a multiple-task operating system. The operation of the cell is established by defining schemes for overall control of the cell domain, databases, job scheduling, communications within the domain, user-interface and communications with outside machines. Although the software is developed in a specific operating system and WINDOW facilities, the operating strategies can be applied globally.

• Industrial Engineering and Management Systems
• /
• 제6권1호
• /
• pp.83-93
• /
• 2007

This paper gives an attempt to build a decision support tool linked with a simulation software called ARENA for evaluating and comparing the performance of the push and pull material driven strategies operating in the flow shop environment with a bottleneck resource as the shop's constraint. To be fair for such evaluation, the comparison must be made fairly under the optimal setting of both systems' operating parameters. In this study, an optimal-seeking heuristic algorithm, Genetic Algorithm (GA), is employed to suggest a systems' best design based on the economic consideration, which is the profit generated from the system. Results from the study have revealed interesting outcomes, letting us know the strength and weakness of the push and pull mechanisms as well as the effect of each operating parameter to the overall system's financial performance.

• Journal of the Ergonomics Society of Korea
• /
• 제18권3호
• /
• pp.127-140
• /
• 1999

In order to apply three-dimensional images to industries, the possibility of realizing three-dimensional images should be ensured and when operating a task using three-dimensional images, the intention of the observer and the result of operation should be precisely related. The aim of this paper is to investigate the task performance of a human operator during operating a robot manipulator using three-dimensional and two-dimensional image displays. From the result of this research, it was found that the accuracy of robot operation in the case of using three-dimensional displays is much higher than in the case of using two-dimensional displays and the adapting time to the operating task using three-dimensional displays is shorter than that using two-dimensional displays. From such results, we concluded that the application of three-dimensional displays, which can closely reflect real environment, to industries is desirable.