• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.389-423
• /
• 1998

This investigation was designed to determine the effectiveness of the posterior occlusal schemes on masticatory activity during mastication in complete denture. Twelve edentulous subjects were selected for this study. All subjects had no past history and no functional abnormality on masticatory system and TMjoint. And, they had residual ridge of favorable morphology, firm mucosa and Class I skeletal jaw relationship, Twelve experimental denture with interchangeable occlusions(0-degree teeth, 30-degree teeth, Levin teeth and S-A teeth) were constructed for this study. The masticatory performance was analyzed by means of standard sieve(10, 16, 20, 30sieve), and the electrical activity from selected muscles(Temporalis and Masseter muscle) was recorded simultaneously with electromyography (Bio-Pak system) as the subject masticated test foods (rice, peanut and gum) with four different occlusal schemes. Mandibular movement was, also, measured with Sirognathography(Bio-Pak system). These recordings were performed in immediately, after 1 week and after 2 weeks of insertion of complete denture. The results were as fellows; 1. The average masticatory performance of 0-degree artificial teeth was higher than any other artificial teeth. 2. Masticatory performance in denture wearer was affected preferentially by food and artificial occlusal schemes. 3. During chewing, there was a statistical difference of EMG activity between masseter and temporal muscle(p<0.01). Especially, EMG activity of working masticatory muscle was highly affected by food rather than by artificial occlusal schemes. 4. In denture wearer, the velocity of opening was not affected by food, whereas, the velocity of closing was faster in soft food chewing than in hard food chewing, and the amount of vertical displacement was grater in chewing of soft and large bolus than in chewing of hard and small bolus. However, the amount of lateral displacement showed conversely(p<0.05). 5. It was considered that masticatory performance in denture wearer is not affected by the condition of residual ridge. the history of denture wear, the preference, the adaptation to artificial teeth and the total mesiodistal length of artificial posterior teeth.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.539-573
• /
• 1996

This investigation was designed to determine the effectiveness of the posterior occlusal schemes on masticatory activity during mastication in complete denture. Twelve edentulous subjects were selected for this study. All subjects had no past history and no functional abnormality on masticatory system and TMjoint. And, they had residual ridge of favorable morphology, firm mucosa and Class I skeletal jaw relationship, Twelve experimental denture with interchangeable occlusions(0-degree teeth, 30-degree teeth, Levin teeth and S-A teeth) were constructed for this study. The masticatory performance was analyzed by means of standard sieve(10, 16, 20, 30sieve), and the electrical activity from selected muscles(Temporalis and Masseter muscle) was recorded simultaneously with electromyography(Bio-Pak system) as the subject masticated test foods (rice, peanut and gum) with four different occlusal schemes. Mandibular movement was, also, measured with Sirognathography(Bio-Pak system). These recordings were performed in immediately, after 1 week and after 2 weeks of insertion of complete denture. The results were as follows; 1. The average masticatory performance of 0-degree artificial teeth was higher than any other artificial teeth. 2. Masticatory performance in denture wearer was affected preferentially by food and artificial occlusal schemes. 3. During chewing, there was a statistical difference of EMG activity between masseter and temporal muscle(p<0.01). Especially, EMG activity of working masticatory muscle was highly affected by food rather than by artificial occlusal schemes. 4. In denture wearer, the velocity of opening was not affected by food, whereas, the velocity of closing was faster in soft food chewing than in hard food chewing, and the amount of vertical displacement was grater in chewing of soft and large bolus than in chewing of hard and small bolus. However, the amount of lateral displacement showed conversely (p<0.05). 5. It was considered that masticatory performance in denture wearer is not affected by the condition of residual ridge, the history of denture wear, the preference, the adaptation to artificial teeth and the total mesiodistal length of artificial posterior teeth.

• 복식
• /
• 제64권8호
• /
• pp.83-96
• /
• 2014

This study aims to analyze the design of current nurse uniforms, investigate the state of nurse uniforms, and uniform design preferences in order to ultimately develop functional nurse uniform, which satisfy their needs. First, observing photos of nurses' campaign on wearing a badge showed that opening of top uniform almost always incorporated buttons, and sleeves were mostly set-in half sleeves while collars tended to be mandarin collars. The colors were mostly white for both top and bottom, while the top showed a bit more variety in colors. White tops often incorporated hospital logos on them. Second, in terms of the nurse uniform distribution, each nurse is given one top and one bottom per year. In addition, either a cardigan or a jacket on top of the regular summer uniform constitutes the winter uniform, whereas the availability of cardigans differed by hospitals. Third, the main source of contamination of uniforms was blood, and the level of satisfaction was all low in terms of the design, function, and material of the uniform, calling for the enhancement and development of new uniforms. Design preferences were two-piece with pants, color preferences were blue and pink, and pattern preferences were hospital logo, stripes, and check patterns in the listed order of preference. Complaints were usually made on the contamination of front pocket of the top, lack of sufficient pockets for storage, and tightness of the sleeves. Some preferences on finishing were the princess seams, mandarin collar, set-in half sleeves, and button closing on top. The preferred belt was a mixed form of straight-lined belt and rubber belt, and straight lined hem and spandex blended fabrics were favored for the clothing.

• 동의생리병리학회지
• /
• 제33권2호
• /
• pp.75-81
• /
• 2019

In order to research the pathological entity of Jueyin disease in ${\ll}Shanghanlun{\gg}$, some sharing concept of three-yin-three-yang used in ${\ll}Neijing{\gg}$ and ${\ll}Shanghanlun{\gg}$ were investigated first, and then the meaning of jueyin and jueyin disease were analyzed. In cold damage disease, time-space factor is important because the pathological change is rapid and the symptoms along path are similar, therefore three-yin-three-yang having complex meaning of time and space can be used as an appropriate pathological concept. So to speak, it is able to be interpreted as various modes like variations of yin-yang, qi-blood, change of pulse condition, theories of opening, closing, pivot or exuberance and debilitation of form and qi manifested in the six districts of the human body following disease process. Jueyin is between front taiyin and rear shaoyin, and it's attribution is inherent in qi stagnation and yin exuberance in relative to the location of flank and liver. Putting together above descriptions, pathological entity of jueyin disease is that the symptoms mingled with cold and stagnant heat competing each other when a subject having qi stagnation in flank with cold in extremities and lower abdomen in particular is seized with cold influenza.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.357-362
• /
• 2008

This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water($H_2O$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.1-6
• /
• 2011

본 연구에서는 정상초음파장의 간섭에 의해 야기되는 예혼합화염의 구조 변이를 규명하기 위한 실험 결과를 제시한다. 화염전파를 관찰하기 위해 슐리렌 기법을 이용하였으며, 초기압력 및 연소챔버 개방 유무에 따른 화염선단의 형태 및 화염 전파속도를 고찰하였다. 정상초음파장에 의한 화염선단의 찌그러짐이 관찰되었고, 초음파장의 특성이 변하지 않는 한 그 수직방향으로의 위치는 일정하였다. 정상초음파의 영향을 받은 화염은 전파할수록 구조적 변화가 심해졌으며, 전파속도 또한 증가하였다. 반사파와 정상초음파의 영향으로 연꽃모양의 화염(lotus flame)이 형성되는 사실을 발견할 수 있었다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1408-1418
• /
• 1992

본 연구에서는 여러가지 흡기관 조건 및 밸브타이밍 변화에 대하여, 현재까지 연구에서 확인된 IVC에서 흡기포트압력 값의 체적효율에 대한 영향을 검토하고, 흡기 밸브가 열리는 동안 흡기 포트압력의 어느 부분 또는 지점이 엔진의 체적효율 변화를 설명해 줄 수가 있는지를 실험적으로 규명하고자 하였다.이 목적을 위해 각 흡입조 건에 대한 흡기포트압력 및 엔진 성능값을 측정.분석하여 서로의 연관성을 비교, 검토 하였다.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.9-18
• /
• 2002

The aim of this study is to propose effective measures for shortage of manpower of dental technology laboratory in Gangwon province by means of examining not only the history of Gangwon association, present condition of transference of members of Gangwon association from 1990, of missing members and annual rate of participation in repair education with setting object of study into Gangwon association under the influence of the Korean Dental Technology Association but also the present condition of opening and closing laboratory, amount of business connection and condition of shortage of manpower and its field with setting object of study into 28 dental technology laboratories. Results from this study are like followings : First, Gagnwon association was established in 1984 as the eleventh in the line of the board, reorganization of board is conducted 8 times up to the eighth in the line of the board in 2001. board is composed of 16 persons including president and operated its term as 3 years. Second, a number of representative and ordinary member of Gangwon association has increased gradually from 1992 to 2001. in aspect of annual rate of participation in repair education, representative's is more higher than ordinary member's overall. the worst rate of whole members' is shown as 47.9% and the its best rate is shown as 92.0%. in addition, 70$\sim$80% rate of participation into repair education is shown most frequently as 8 times of whole 20 times from 1992 to 2001. Third, 29 authorized dental technology laboratories have registered in Gangwon association until march 2002 within 9 cities and counties. in consideration of establishment location. Gangneung city has most amount as 7 laboratories(24.1%), Wonju city has 5(17.2%), Samcheok city and Sokcho city, each has 4(13.8%), Chuncheon city has 3(10.3%), Donghae city and Taeback city, each has 2(6.9%) and Yangyang and Yongwol county, each has 1(3.4%). Fourth, amount of work personnel of laboratory in Gangwon province is 1$\sim$10 persons as the maximum value. 23 laboratories(82.1%) have their own work personnel as amount of 5 and below. in aspect of main business, most of laboratories focus on the Porcelain and Crown. and 16 laboratories(57.1%) have their own expensive equipments such as Milling. its also suggests that 16 laboratories(57.1%) suffer their shortage of working personnel. specifically, 6 laboratories(21.4%) suffer the highest shortage especially in Denture field, Fifth, whole number of Gangwon association is up to 101 members (28 representatives and 73 ordinary members) until December 31th 2001. amount of immune from repair education of Gangwon association until October 2001 is up to 10 persons, and missing members from 1997 is up to 18 persons, suspension of business is up to 4 persons. in aspect of transference from 1990, transfer-in is up to 21 persons and transfer out is up to 16 persons.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.203-244
• /
• 1998

The human mandible is always under the condition of loading by the various forces extorted by the attached muscles. The loading is an important condition of the stomatognathic system. This condition is composed of the direction and amount of forces of the masticatory muscles, which are controlled by the neuromuscular system, and always influenced by the movement of both opening and closing. Mandible is a strong foundation for the teeth or various prostheses, nevetheless it is a elastic body which accompanies deformation by the external forces on it. The elastic properties of the mandible is influenced by the various procedures such as conventional restorative treatments, osseointegrated implant treatments, reconstructive surgical procedures and so forth. Among the treatments the osseointegrated implant has no periodontal ligaments, which exist around the natural teeth to allow physiologic mobility in the alveolar socket. And so around the osseointegrated implant, there is almost no damping effect during the transmission of occlusal stress and displacements. If the osseointegrated implants are connected by the superstructure for the stabilization and effective distribution of occlusal stresses, the elastic properties of mandible is restricted according to the extent of 'splinting' by the superstructure and implants. To investigate the change of elastic behaviour of the mandible which has osseointegrated implant prosthesis of various numbers of implant installment and span of superstructre, a three dimensional finite element model was developed and analyzed with conditions mentioned above. The conclusions are as follows : 1. The displacements are primarily developed at the area of muscle attachment and distributed all around the mandible according to the various properties of bone. 2. The segmentation in the superstructure has few influence on the distribution of stress and displacement. 3. In the load case of ICP, the concentration of tensional stress was observed at the anterior portion of the ramus($9.22E+6N/m^2$) and at the lingual portion of the symphysis menti($8.36E+6N/m^2$). 4. In the load case of INC, the concentration of tensional stress was observed at the anterior portion of the ramus($9.90E+6N/m^2$) and the concentration of tensional stress was observed at the lingual portion of the symphysis menti($2.38E+6N/m^2$)). 5. In the load case of UTCP, the relatively high concentration of tensional stress($3.66E+7N/m^2$) was observed at the internal surface of the condylar neck.

• 대한원격탐사학회지
• /
• 제38권6_1호
• /
• pp.1101-1107
• /
• 2022

열화상 카메라를 이용해 식물의 엽온을 측정하는 원격탐사 기법은 농업의 작물 감시 또는 선별에 이용될 수 있는 가능성이 80년대부터 제시되어 왔지만, 그 유용성에 비해 다양한 적용 사례가 적어 제대로 활용되지 못하고 있었다. 하지만, 최근 열화상 카메라 하드웨어 기능의 비약적 발전과 보급에 따라 농업에서의 열화상 카메라 활용이 주목받고 있다. 앞으로의 활용성 증대를 위해 다양한 활용 사례 연구 필요성에 부응하여 본고에서는 석회질 비료를 처리한 벼와 차광조건에서 생육 된 콩의 생리적 변화를 탐지하였고, 내염성 계통 콩에 대해서는 염해 감수성 콩 품종과의 엽온 차이가 선별 가능한 수준임을 보였다. 열화상 카메라의 관측 정확도와 기공 개폐 기반의 분석 기술이 더욱 발전한다면, 스마트팜과 표현체 분석 분야에 활용이 많아질 것으로 기대된다.