• Structural Engineering and Mechanics
• /
• v.5 no.6
• /
• pp.679-689
• /
• 1997

The damage of concrete subjected to multiaxial complex loading involves strong anisotropy due to its highly heterogeneous nature and the geometrically anisotropic characteristic of the microcracks. A comprehensive description of concrete damage is proposed by introducing a fourth-order anisotropic damage tenser. The evolution of damage is assumed to be related to the principal components of the current states of stress and damage. The unilateral effect of damage due to the closure and opening of microcracks is taken into account by introducing projection tensors that are also determined by the current state of stress. The proposed damage model considers the different kinds of damage mechanisms that result in different failure modes and different patterns of microdefects that cause different unilateral effects. This damage model is embedded in a thermomechanically consistent constitutive equation in which hardening and the triaxial compression caused shear-enhanced compaction can also be taken into account. The validity of the proposed model is verified by comparing theoretical and experimental results of plain and steel fiber reinforced concrete subjected to complex triaxial stress histories.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.577-580
• /
• 2000

We measured 3-dimensional images of the light emitted from plasma display panel(PDP) by using newly proposed scanned point detecting method(SPDM). The SPDM has the point detector with pinhole. The light emitted from PDP cell at the in-focus position can pass through the pinhole and be collected by detector. On the contrary, the light emitted from PDP cell at the out-of-focus positions is focused on the front of or the behind of the pinhole. We could analyze the characteristic of 3-dimensional light emission distribution by SPDM. From 3-dimensional measurement of 828nm, we found that the efficient design of PDP cell, the importance of opening ratio, and the relations between BUS electrode position and discharge intensity are obtained.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.347-353
• /
• 2002

The compressive residual stress, which is induced by shot peening process, seems to be an important factor of increasing the fatigue strength. And then it was showed that residual stress was disappearenced at the high temperature. The fatigue characteristic study of a SUP9 spring steel processed shot peening is performed by considering the high temperature service conditions in the range of room temperature through $180^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. The fatigue resistance characteristics and fracture strength at high temperature is considerable lower than that of room temperature in the early stage and stable of fatigue crack growth region.

• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.47-53
• /
• 2007

A study is carried out to evaluate the stresses for steel box girder support diaphragm using finite elements method. This study includes the stress characteristic compared with experimental method for diaphragm design. The results from the finite elements method are compare with the results from experimental investigations and shown to give good agreement. The shear stresses were generally uniformed in the outer plane. increased rapidly above the bearing. The horizontal direct stresses were generally low except in the vicinity of the bearing and opening comer where a local increase in compressive stresses occured.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.26-33
• /
• 2002

This study was undertaken to obtain the fundamental knowledges on the weld deflects and it's realtime monitoring method. The paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurements during $CO_2$ laser welding of STS 304 stainless steel and A5083 aluminum alloy in different welding condition. The characteristic frequencies of plasma and keyhole fluctuations at different welding speed and shield gases were measured and compared with the results of Fourier analyses of temporal AE and LE spectra, and they had considerably good agreement with keyhole and plasma fluctuation. Namely, the low frequency peaks of AE and LE shifted to higher frequency range with the welding speed increase, and leer the argon shield gas it was higher than that in helium and nitrogen gases. The low frequencies dominating in fluctuation spectra of LE probably reflect keyhole opening instability. It is possible to monitor the weld bead deflects by analyzing the acoustic and/or plasma light emission signals.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.328-332
• /
• 1998

Anionic ring-opening polymerization of 3,4-[(dimethylsilyl)isopropyl]benzo-1,1-dimethyl-1-silacyclopentene in the presence of n-butyllithium and HMPA in THF at - 78 ℃ afforded poly[3,4-(dimethylsilylisopropyl)benzo-1,1-dimethyl-1-silapentene]. The characteristic Si-H stretching frequency in the IR is observed at 2100 cm-1. The polycarbosilane has been modified by chloroplatinic acid catalyzed addition of styrene to the polycarbosilane SiH units. Molecular weights and thermal properties of the polymers were compared. The sol-gel polymerization of 3,4-[(dimethoxysilyl)isopropyl]benzo-1,1-dimethoxy-1-silacyclopentene in the presence of aqueous HCl or NaOH in THF resulted in a cross-linked polysiloxane. The xerogel has a low surface area of 13-14 m2/g and is stable up to about 400 ℃ with only 5% weight loss under a nitrogen atmosphere.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.63-70
• /
• 2011

Livestock buildings are rural facilities as vulnerable to natural disasters as vinyl houses. Many of livestock buildings have a roof but without side walls. The roof of such structures is easily blown away by a typhoon and this results in a heavy loss. Therefore, farmers install winch curtains on the sides to prevent damages caused by typhoons. This study purposed to examine the distribution of wind pressure coefficient among different positions of livestock shed roof according to the opening of side walls. It was found that according to the distribution of peak external pressure coefficient on the roof surface of livestock shed, the wind blowing at wind angle $0^{\circ}$ was disadvantageous to roof surface regardless of the presence of side walls. However, it was confirmed that the peak external pressure coefficient was affected by wind angle and the length of eave depending on the presence of side walls.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.337-345
• /
• 2012

A model test is performed to investigate the dynamic behavior of truss type lift gate which is being constructed by the four major rivers project. The gate dimensioned 40 m in width, 9m in height is scaled with the ratio of 1:25 and is made of acryl panel and supplemented weight by lead in the concrete test flume dimensioned 1.2 m in width, 0.5 m in height and 30m in length. Firstly natural frequencies of the model gate are measured and compared with the numerical results for the calibration. The amplitudes of the vibration are measured under the different gate opening, upstream water level conditions. Also models with bottom angle $20^{\circ}$, $35^{\circ}$ and $50^{\circ}$ are tested and compared to find out a proper shape of bottom structure which minimizes the gate vibration. These test results presents a basic data for the guide manuals of gate management and a design method to reduce the gate vibration of truss type lift gate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.238-243
• /
• 2011

The ambient temperature of the experimental conditions changes by varying the speed of the compressor and the electronic expansion valve opening. The effects of changing valve opening to the entire system has been investigated. The results show that the ambient temperatures of $35^{\circ}C$ and $30^{\circ}C$ controlled at 30Hz must be avoided. The capacity control range of the control compressor with changing speed is about 43~100% at $35^{\circ}C$, 43~100% at $25^{\circ}C$ and 48~100% at $10^{\circ}C$, respectively. The results show the capacity control range decreases with decreasing ambient temperature.

• Human Ecology Research
• /
• v.51 no.3
• /
• pp.285-291
• /
• 2013

Interest in traditional culture has been increasing due to globalization. We need to create fashion items using Korea folk culture like the Hanbok. In this paper, the design development of toddler's pajamas was attempted by using women's Sokgot pants, which were worn by women in Joseon Dynasty period. The study involved a review of literature and an investigation of past relics. Traditional women's Sokgot pants had a 'mu' or 'dang' in the crotch which is called 'the mit' now. The opening of the mit will be used for designing toddler's pajamas. Design suggestions for four styles of toddler's pajamas, which reflect the formative characteristic of women's Sokgot pants, have been created. Research outcomes are as follow: the characteristics of Ran-pants are applied to design 1 and design 2. There have pleats along the waistband of the toddler's pajamas, making the Mu more hidden. Pleats of the waist part are achieved by using an elastic, which also makes the pajamas easier to fit and to wear. The characteristics of Gaedanggo, of which the crotch is opened, are applied to design 3 and design 4. The opened crotch is applied so that toddlers can relieve themselves easily while they are wearing these pajamas. There is also an opening in the centerline of the front Mu in design 4 which gives additional functionality and comfort. This work shows that items of traditional folk dress can be used to make present fashion items.