• 전기학회논문지
• /
• 제60권1호
• /
• pp.26-31
• /
• 2011

In this paper, we focused on the loop distribution system to solve the international issues of energy depletion and global warming. The conventional method of reconfiguration of distribution system was moving open points of switches from an actual switch position to another, while an appropriate switch must be opened to preserve the radial structure and this procedure is continued til there is no further loss reduction. However, the loop distribution system is the best optimization method to minimize loss than the other methods which is preserving radial structure. So we analyzed 3 types of loop distribution system upgraded from radial distribution system by changing normally open switch to normally closed switch. The simple 3 types of model system for simulation were composed, and each types of loop system were simulated in accordance with varying parameters. As a result of simulations, the loss reduction was different for each types of loop distribution system and each loop types have constraints for composing loop distribution system. The algorithms propose the method how to construct loop distribution system regarding constraints. Type I that needs least requirements get least loss reduction and Type III that needs most requirements get maximum loss reduction. On the other hand, Type I was most feasible distribution system to be realized.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.86-91
• /
• 2010

New Design configurations of the fighter aircraft igloo diffuser were studied based on the closed ventilation type in contrast to the conventional open distribution type. To validate the enhanced and safe performance, the exhaust flow patterns of the two igloo diffuser types were simulated by both experimental and computational approaches as design tools. Flow visualizations were conducted to investigate the exhaust flow patterns in experimental approach. In addition, the commercial code called Fluent was used to calculate flow field properties. Computational simulations provided detailed parametric studies that significantly reduced the amount of experimentation necessary to alter the design parameters of the existing fighter igloo diffuser. The closed ventilation type of the igloo diffuser was shown the better results.

• 한국경제지리학회지
• /
• 제23권4호
• /
• pp.408-424
• /
• 2020

본 연구는 커피전문점 소재지별 지가 속성을 토대로 생존하여 영업 중인 커피전문점과 폐업한 커피전문점을 대상으로 공간 군집화를 시도하고, 군집 유형별 토지 특성(지가 및 필지 정보), 교통 요인(물리적 접근성)과 점포 속성(프랜차이즈 정보, 소재지별 동종업종의 개·폐업 경험), 공간 밀집도(커널 밀도 추정) 등 다양한 입지 특성을 통해 커피전문점의 생멸 분포에서 나타나는 특징을 파악한다. 이를 위해 영업 중 및 폐업한 커피전문점의 공간 군집은 일반적 입지분포형, 주거지역의 상업화형, 상업중심지 입지형 등으로 유형 구분하고, 군집 유형별 입지 특성을 비교 분석한다. 군집 결과, 영업 중 및 폐업한 커피전문점의 입지는 같은 유형으로 분류되더라도 서로 다른 공간 분포 양상을 나타내고, 입지 유형이 달라도 특정 핫스폿에서는 모두 높은 밀집도를 나타낸다. 본 연구의 분석 결과는 커피전문점 창업을 비롯해 지역별 상권정보를 파악하는데 기초자료로 제공될 수 있다.

• 대한기계학회논문집B
• /
• 제38권9호
• /
• pp.789-795
• /
• 2014

본 연구에서는 개방형 축열시스템에 설치되는 다양한 형상을 가진 디퓨저의 유량 분배 특성을 수치해석 하였다. 작동유체가 분기배관의 양 방향으로 나뉘어져 있는 구멍들을 통하여 균등하게 분배되도록 4가지 형상의 디퓨저를 설계하였다. 상용 해석 프로그램인 ANSYS-FLUENT을 사용하여 비압축성 유체의 3차원 정상 층류 유동으로 시뮬레이션을 수행하였다. 한 방향 또는 양 방향으로 분배되는 디퓨저는 유량이 일정하게 분배되지 않는 반면에 양 방향 헤더 형식과 H형 대칭구조의 디퓨저는 균등한 분배 특성을 보였다. 한편, H형 대칭구조의 디퓨저는 양 방향 헤더 형식 디퓨저보다 높은 펌프 양정을 필요로 하므로 유량분배도 일정하고 펌프 양정도 낮은 양 방향 헤더 형식 디퓨저가 최적임을 확인하였다.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.120-129
• /
• 2006

Apartments have become the most popular type of residential building in Korea since the 1960s. The dwelling space should be designed to accomodate various life styles or changing needs of family members. This research is conducted to analyze flexible interior space types of apartments and to improve the architectural planning and design of apartments that can satisfy various needs of residents. In this study, apartments of 10 - 90 pyeongs built in the region of Seoul, between 1998 and 2007, are investigated in terms of the unit plan, the number of open sides, and a distribution of flexible apartment types for each year, Apartments with flexible space are classified into 10 different types, including a flexible type between bedrooms, a flexible type between a bedroom and the livingroom, and a flexible type between the dinning room and the livingroom. According to the composition of unit plans, apartments are also differentiated as a single-corridor type, a double-corridor type, a stairway type, a hall type, and a combination type. According to these classifications, the characteristics of desirable unit plans were analyzed. The results of the analysis showed that, as the unit size of apartments get bigger, the ratio of width/depth of the front side unit plan is increased. This result reflects a trend of high-rise apartments which have an increased number of front-side bays and a shorter depth for better penetration of daylight. In addition, a hall type is found to have a wider front side and shorter depth. According to open sides, a flexible type of the livingroom and the dinning room/kitchen (L-D.K) is found to be most common for the front/back open space, and the livingroom is usually placed on the front/side open space. To meet the changing needs of residents, more research should be conducted on flexible dwelling space.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.572-576
• /
• 2003

$UO_2$-20 wt% CeO$_2$ 소결 펠렛의 밀도에 따른 개/폐 기공도, 기공의 크기 및 그 분포 그리고 기공의 형태를 조사하였다. 이론 소결밀도 약 96% 이상에서는 기공도는 개기공이 거의 없는 폐기공으로 나타났다. 반면에 기공크기 분포는 소결밀도에 관계없이 bimodal 형태를 보이나, 소결밀도가 증가할수록 기공 개수만 적게 나타났다. 기공의 형태는 소결밀도가 증가할수록 불규칙한 형태에서 둥근 형태로 바뀌었다.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.117-132
• /
• 2018

There always exist nonzero inspection errors whether inspectors are humans or automatic inspection machines. Inspection errors can be categorized by two types, type I error and type II error, and they can be regarded as either a constant or a random variable. Under the assumption that two types of random inspection errors are distributed with the "uniform" distribution on a half-open interval starting from zero, it was proved that inspectors overestimate any given fraction defective with the probability more than 50%, if and only if the given fraction defective is smaller than a critical value, which depends upon only the ratio of a type II error over a type I error. In addition, it was also proved that the probability of overestimation approaches one hundred percent as a given fraction defective approaches zero. If these critical phenomena hold true for any error distribution, then it might have great economic impact on commercial inspection plans due to the unfair overestimation and the recent trend of decreasing fraction defectives in industry. In this paper, we deal with the same overestimation problem, but assume a "symmetrical triangular" distribution expecting better results since our triangular distribution is closer to a normal distribution than the uniform distribution. It turns out that the overestimation phenomenon still holds true even for the triangular error distribution.

• 건축역사연구
• /
• 제13권4호
• /
• pp.125-138
• /
• 2004

Open-rectangular plan Hanok is one of the major types that compose the urban tissues of Bukchon, a typical traditional residential area in Seoul. Through the comparison of the cadastral map of 1912 and the aerial photograph of 1962, the paper has given the outline of the and the distribution of Open-rectangular plan Hanok at Bukchon. And the paper defines the characteristics of Open-rectangular plan Hanok at Bukchon as followings. First, Open-rectangular plan Hanok at Bukchon is the mutated type of Open-rectangular plan Hanok in Kyong-gi Province. Second, the composition and characteristics of Bakat-chae and outer-courtyard have been changed through the adaptation itself to the compact lots of urban neighborhood. Third, the composition and characteristics of An-chae has not been changed except the inner corner bay, that gives the lights and view to An-bang through the window. And the comparison and observation of four examples, the paper defines the identities of Open-rectangular plan Hanok at Bukchon. The partial transformation comes from the conflicts and adjustments with the structure of alley and the topographical condition of lots.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.675-693
• /
• 2017

In this paper, based on the first-order shear deformation plate theory, buckling analysis of piezoelectric coupled transversely isotropic rectangular plates is investigated. By assuming the transverse distribution of electric potential to be a combination of a parabolic and a linear function of thickness coordinate, the equilibrium equations for buckling analysis of plate with surface bonded piezoelectric layers are established. The Maxwell's equation and all boundary conditions including the conditions on the top and bottom surfaces of the plate for closed and open circuited are satisfied. The analytical solution is obtained for Levy type of boundary conditions. The accurate buckling load of laminated plate is presented for both open and closed circuit conditions. From the numerical results it is found that, the critical buckling load for open circuit is more than that of closed circuit in all boundary and loading conditions. Furthermore, the critical buckling loads and the buckling mode number increase by increasing the thickness of piezoelectric layers for both open and closed circuit conditions.

• Journal of Chest Surgery
• /
• 제26권7호
• /
• pp.521-525
• /
• 1993

Sixty-three patients who underwent open mitral commissurotomy at Sejong General Hospital during last 10 years from the August, 1983 to June, 1993 were reviewed There were fifty-one women and twelve men, and the mean age was 34.2 years. According to the NYHA classification, the distribution of patient preoperatively was as follows: class I, 5 patients ; class II, 26 patients ; class III, 30 patients ; class IV, 2 patients, and mean duration of symptome was 4.5 years. The mean mitral valvular area measured with echocardiogram preoperatively was 0.92cm2. All patients underwent open mitral commissurotomy and 41 patients required additional procedures for relief of subvalvular stenosis or other valvular disease. There were no operative death. 63 patients had three different types of mitral stenosis : type I, mobile cusps without subvalvular change [21 patients] ; typeII, thickened cusps with subvalvular change [34 patients] ; type III, rigid cusps with severe subvalvular change [8 patients]. The valvular calcification was seen in 11 patients [17%] and 15 patients [24%] had left atrial thrombus. The duration of follow-up was from 1 month to 168 months [mean, 39.6 months] and there were no late death. Six patients required reoperation and one patient had embolic episode. Conclusively,the open mitral commissurotomy represents a safe surgical precedure for treating mitral stenosis, allowing a complete removal of atrial thrombosis if present, and even when associated with subvalvular changes.