• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1321-1335
• /
• 2022

This study was conducted to investigate the effect of absorption coefficient models on the P1 radiation model for a premixed hydrogen flame containing the water vapor. A CFD combustion simulation analysis was performed using XiFoam, one of the open-source CFD solvers in OpenFOAM. The solver using the flamelet combustion model has been modified to implement radiative heat transfer. The absorption coefficient models used in this study the grey-mean model and constant model, and for comparison, case without radiation was added. This CFD simulation study consisted of benchmarking the THAI HD-15 and HD-22 experiments. The difference between the two tests is the inclusion of water vapor in the condition before ignition. In the case of the HD-22 experiment containing water vapor in the initial condition, the simulation results show that the grey-mean absorption coefficient model has a strong influence on the temperature decrease of the flame and on the change in pressure inside the vessel.

• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.14-20
• /
• 2008

The flow characteristics around a rudder in open water condition is analyzed by the computational method. Reynolds averaged Navier-Stoke's equation is utilized for the computation. The computational hydrodynamic force coefficients are verified through comparing with the experimental results. The information of these flow characteristics is necessary to predict cavitation and maneuvering performances, to estimate steering gear capacitance, and to get the bending moment which is useful for the structural analysis. The pressure distribution, the three-dimensional flow separation, and the tip vortices are investigated. The pattern of the three-dimensional flow separation is analyzed utilizing a topological rule. The tip vortices are also investigated through a visualization technique.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.22-37
• /
• 2016

This article investigates numerical modeling of surface piercing propeller (SPP) in unsteady open water condition using boundary element method. The home code based on BEM has been developed for the prediction of propeller performance, unsteady ventilation pattern and cross flow effect on partially submerged propellers. To achieve accurate results and correct behavior extraction of the ventilation zone, finely mesh has generated around the propeller and especially in the situation intersection of propeller with the free surface. Hydrodynamic coefficients and ventilation pattern on key blade of SPP are calculated in the different advance coefficients. The values obtained from this numerical simulation are plotted and the results are compared with experiments data and ventilation observations. The predicted ventilated open water performances of the SPP as well as ventilation pattern are in good agreement with experimental data. Finally, the results of the BEM code/experiment comparisons are discussed.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.1-6
• /
• 2015

In this study, a numerical prediction on propulsive performance of a ducted propeller in open water condition was carried out by solving Reynolds averaged Navier-Stokes(RANS) equation using computational fluid dynamics(CFD). A configuration of propeller Ka-470 inside duct 19A was considered. Hexahedral grid system was generated by dividing whole computational domain into three separate regions; propeller, duct and outer flow region. A commercial CFD software, ANSYS-CFX was used for numerical simulations. Results were compared with experimental data and showed considerable improvement in accuracy, in comparison to those from surface panel method which is based on potential flow assumption. The results also exhibited the importance of grid system within the gap between the inner surface of duct and blade tip for accurate prediction of propulsive performance of ducted propeller.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.61-67
• /
• 2008

In this paper, electrochemical and microstructural characteristics of nickel-plated Alloy 600 were investigated in order to identify the performance of electroless Ni-plating on Alloy 600 in high-temperature aqueous condition with the comparison of electrolytic nickel-plating. For high temperature corrosion test of nickel-plated Alloy 600, specimens were exposed for 770 hours to typical PWR primary water condition. During the test, open circuit potentials (OCP's) of all specimens were measured using a reference electrode. Also, resistance to flow accelerated corrosion (FAC) test was examined in order to check the durability of plated layers in high-velocity flow environment at high temperature. After exposures to high flow rate aqueous condition, the integrity of surfaces was confirmed by using both scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). For the field application, a remote process for electroless nickel-plating was demonstrated using a plate specimen with narrow gap on a laboratory scale. Finally, a practical seal design was suggested for more convenient application.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.10-17
• /
• 2017

This paper deals with a comparison of performance between tip rake propeller and normal propeller in P.O.W condition. In comparison with normal propeller, tip rake propeller is good at preventing occurring negative effect: tip vortex, etc. But, officially formulated information about tip rake propeller doesn't become known. So this paper makes design variables about rake factors and applies them to propeller geometry. And propellers applied design variables are compared with each other about open water propeller efficiency. Also this paper confirms a vorticity reduction at propeller tip.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.265-270
• /
• 2002

증류수 및 수도수 중에서 방열기로 사용되는 알루미늄합금재의 온도 변화, 탈기에 의한 개로전위, 부식전류밀도에 관하여 연구한 결과 다음과 같은 결론을 얻었다. 1. 청수 중에서 개로전위는 온도가 높아짐에 따라 비전위화 되고, 또한 탈기 후의 개로전위는 탈기 전의 개로전위보다 비전위화 된다. 2. 증류수 중에서의 부식전류밀도는 수도수 중에서의 부식전류밀도보다 더 억제된다. 3. 탈기 후의 부식전류밀도는 탈기 전의 부식전류밀도보다 크게 억제된다

• 한국자원식물학회지
• /
• 제34권6호
• /
• pp.608-615
• /
• 2021

Soil moisture control system including soil sensing and automatic water supply chain was constructed on open farmland and pot conditions. Soil moisture was controlled by the system showing over the soil moisture contents except 40% treatment. EC was gradually decreased by increasing cultivation days. On applying this system to control soil moisture, the growth and development characters of the bellflower were improved compared with control, cultivation without the automatic irrigation. Of the growth and development characters, plant height with water treatments was higher than that of control in 1st-year plants. Moreover, numbers of branch were increased by the increased soil moisture on farmland and pot condition. Capsule numbers for seed were best at 20%, 30% soil moisture treatment in 1st-year plants, and 20% to 50% treatment in 2nd-year plants. The construction of automatic soil moisture control system provide fundamental data for plant growth and development on open farmland soil condition.

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.123-128
• /
• 2016

프로펠러 표면의 생물 부착이 프로펠러 성능에 상당한 영향을 미치지만 프로펠러 표면 거칠기와 관련된 연구는 상대적으로 선체 표면에 비하여 많지 않다. 본 연구에서는 Schultz(2007)가 발표한 Granville's similarity-law scaling 절차에 기초하여 실선 7 m 크기의 탱커 프로펠러에 표면 부착물 상태가 서로 다른 3가지 경우를 고려하여 프로펠러 단독 효율의 감소의 변화를 Lifting surface code를 사용하여 수치적 계산을 수행하여 효율을 비교하였다. 본 논문에서의 결과는 표면 거칠기가 큰 석회질 부착물($k_s=0.001$)은 선박 설계 속도(J=0.5)에서 최대 15 %의 프로펠러 효율 감소를 보였음을 확인하였으며 이는 선박 운항 시 생물 부착에 의한 효율 감소에 대한 평가가 고려되어야 한다는 점을 나타내고 있다.

• 한국농림기상학회지
• /
• 제25권3호
• /
• pp.218-225
• /
• 2023

영농형 태양광 시스템은 노지 작물 경작과 동일한 토지 상부에 설치된 태양광 패널을 통한 발전을 동시에 하는 시스템이다. 지금까지 영농형 태양광은 에너지와 식량의 양자구도로만 집중되어있다. 영농환경 중 하나인 토양수분은 강우 또는 관개수로 증발 및 유출⋅침투로 손실된 수분을 공급받아 노지 작물 생산에 기여한다. 본 연구는 식량, 에너지와 함께 물의 개념을 포함하여 영농형 태양광 시설을 보고자 하였으며, 미기상 관측을 통해 봄 기간 동안 휴경논에서 영농형 태양광 시설 하부의 토양수분과 지온의 변화를 분석하였다. 영농형 태양광 하부는 패널로 인한 부분차광 조건으로 지면에 입사되는 광 에너지량이 감소하여 지온이 낮아질 뿐만 아니라 토양수분 손실이 적어 대조구인 노지에 비해 습윤한 조건을 보인다. 또한, 태양광 하부는 에너지 제한 환경이며, 상대적으로 지온이 높은 노지는 수분 제한 환경으로 설명된다. 노지와 태양광 하부의 상이한 토양수분 환경은 필연적으로 작물에 영향을 미칠 것이며, 농업 환경과 농촌 경제를 고려한 지속가능한 대처가 필요하겠다.