• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.65-73
• /
• 2011

The fibrous raw materials in packaging-grade paper production in Korea were mainly obtained from waste paper. The use of recycled paper has both positive and negative impacts in papermaking process. The primary positive impacts are the environmental protection and manufacturing cost reduction, and the negative impacts are the quality reduction in paper quality and the accumulation of heavy metals and other pollutants in wet- and dry-end process. This study was carried out to consider the optimum acid decomposition system with the highest recovery rate for the analysis of heavy metals in packaging-grade paper. The open digestion system using Kjeldahl apparatus and the closed digestion system using microwave oven for decomposing the organic materials in paper were compared. In both open and closed digestion method, the combination of nitric acid, hydrochloric acid and hydrogen peroxide showed higher recovery rate than using only nitric acid alone because the presence of Cl- ions in hydrochloric acid stabilizes ligand formation with metal ions. KOCC was observed to have the highest heavy metal content among the recycled paper samples. The heavy metal contents decomposed with the closed digestion system were relatively higher than with open digestion system.

• Journal of Information Technology Services
• /
• v.14 no.4
• /
• pp.45-60
• /
• 2015

Governments around the world invest in research and development (R&D) for different purposes : national economy, defence, environment, health, etc. as a means of national survival beyond the means of national competitiveness. These are usually programs with high social impact but low short-term economic impact or large scientific programs that are too expensive and risky for private sector investment alone. The Republic of Korea has also shown a very successful model of economic progress and social development through government R&D programs. However, there have been many corruption scandals behind it while selecting awardees for government R&D programs in Korea. So, the Republic of Korea focused on reforming appraisal system for government R&D and began preparation for "Clean Appraisal System" last year. In this study, first we analyzed the related appraisal tasks through the review of laws and administrative rules and typed appraisal tasks according to the flow of the actors and time. Thus securing the information infrastructure and finally we drew the conceptual model of the system according to an open appraisal tasks by introducing an element of the OECD on open government typed appraisal tasks.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.684-687
• /
• 1997

In order to access to the Business Computer (B/C), the Process Computer(P/C), and the Database Server in one terminal, the Open Man Machine Interface (MMI) System has been developed. The testbed to develop the interface functions for B/C, P/C, DB server, and CCD camera were constructed, which consisted of Workstations and Personal Computers (PC). Graphic display programs Monitoring the process states of Tandem Cold Mill plant were developed using four Graphic User Interface tools: InTouch, FIX32, Open Interface Environment, and ILOG Views. With regard to the CPU utilization and response delay required to open new display, the performance tests have been carried out on each MMI platform.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.181-186
• /
• 2006

본 논문에서는 자속 궤환을 포함하는 자기부상 시스템의 open-loop 특성에 대해서 다룬다. 훌륭한 외란 억제 특성을 포함하고 파라메타 변동에 대해서 둔감한 제어기를 설계하기 위해서 자속 궤환을 이용하는 것이 효과적일 수 있다. 적절한 센서에 의해서 측정 가능한 자속은 전류와 공극의 시간 변화에 대해서 선형적인 관계를 가지고 있으며, 자속의 궤한은 자기 부상시스템이 본질적으로 갖고 있는 전기적 엑츄에이터와 기계적 플랜트 사이의 간섭에 의해서 발생하는 비선형성을 감소시키는 역할을 한다. 모의시험 결과를 통해서 자속의 궤환이 자기부상 시스템의 부하변동에 대해서 open-loop 성능 향상에 효과적임을 보인다.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1242-1244
• /
• 1999

AVR parameter tuning for voltage control of power system generators has generally been done with the open-circuit model of the synchronous generator. When the generator is connected on-line and operating at rated load conditions, the AVR operates in an entirely different environment from the open-circuit conditions. This paper describes a new method for AVR parameter tuning using optimization technique with on-line linearized system model. As this method considers not only the on-line models but also the off-line open-circuit models, AVR parameters tuned by this method can give the sufficiently stable performance at the open-circuit commissioning phase and give the desired performance at the operating conditions. Also this method estimates the optimum parameters for desired performance indices that are chosen for satisfying requirements in some practical applications, the performance of the AVR can satisfy the various requirements.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.455-460
• /
• 2006

본 논문에서는 자속 궤환을 포함하는 자기부상 시스템의 open-loop 특성에 대해서 다룬다. 훌륭한 외란 억제 특성을 포함하고 파라메타 변동에 대해서 둔감한 제어기를 설계하기 위해서 자속 궤환을 이용하는 것이 효과적일 수 있다. 적절한 센서에 의해서 측정 가능한 자속은 전류와 공극의 시간 변화에 대해서 선형적인 관계를 가지고 있으며, 자속의 궤한은 자기 부상시스템이 본질적으로 갖고 있는 전기적 엑츄에이터와 기계적 플랜트 사이의 간섭에 의해서 발생하는 비선형성을 감소시키는 역할을 한다. 모의시험 결과를 통해서 자속의 궤환이 자기부상 시스템의 부하변동에 대해서 Open-loop 성능 향상에 효과적임을 보인다.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.45-48
• /
• 2008

Since the mid-2000, so-called Web 2.0 paradigm was emerged and has been widely extended to actual Web markets with supporting Web technologies. Among Web 2.0 services, mashups with Open APIs is regarded as one of core technologies. Web mapping is also the most dominant mashup application in Open API-based applications, so that various mashups with Google Map API and other Open APIs are developing. In this paper, current technological status is explained with web GIS file formats of KML. While, a prototype is web-based GIS layer authoring system for general users, without any kinds of GIS tools and external spatial databases. This mashup application will be used web-based feature extraction for geo-spatial web for public users.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.36-46
• /
• 1995

The interest and purpose of this study is to control of air-fuel ratio and develop control device of a spark ignition LPG engine with adopting open loop fuel system. The air-fuel ratio is derived by considering airflow resistane of air cleaner element. The result shows that air-fuel ratio becomes more and more rich when airflow resistance increases. Experiments about the influence of airflow resistance on the engine performance, drivability and emissions are performed. Therefore, it is known that open-loop fuel system depends on the absorbing resistance of air-cleaner.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.270-272
• /
• 2018

This paper proposes an open-phase fault control system using 3-phase neutral voltage. The proposed control system is designed as a new topology which uses the potential difference between neutral point and ground(G) of three phase. And the open-phase detection system is configured to three resistance devices(Y-wiring) of the same capacity to each line of three phase power source R,S,T. This paper also designs a mobile phone application for remote alarm of open-phase fault.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.540-542
• /
• 2019

This paper proposes an open-phase fault control system using 3-phase neutral voltage. The proposed control system is designed as a new topology which uses the potential difference between neutral point and ground of three phase. The open-phase detection system is also configured to Y-wiring of three capacitance devices of the same capacity to each line of three phase power source R-S-T. This paper also designs a mobile phone application for remote alarm of open-phase fault.