• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.257.1-257.1
• /
• 2014

We investigated characteristics of ITO/Ag-Pd-Cu (APC)/ITO multilayer electrodes prepared by direct current magnetron sputtering for use as an anode in organic solar cells (OSCs). To optimize electrical properties of ITO/APC/ITO multilayer, we fabricated the ITO/APC/ITO multilayer at a fixed ITO thickness of 30 nm as a function of APC thickness. Compare to the surface of Ag layer on ITO, the APC had a smooth surface morphology. At optimized APC thickness of 12 nm, the ITO/APC/ITO multilayer exhibited a sheet resistance of $6{\Omega}/square$ and optical transmittance of 84.15% at a wavelength of 550 nm which is comparable to conventional ITO/Ag/ITO multilayer. However, the APC-based ITO multilayer showed a higher average transmittance in a visible region than the Ag-based ITO multilayer. The higher average transmittance of ITO/APC/ITO multilayer indicated the multilayer is suitable anode for organic solar cells with P3HT:PCBM active layer. OSCs fabricated on the optimized ITO/ACP/ITO multilayer exhibited a better performance with a fill factor of 64.815%, a short circuit current of $8.107mA/cm^2$, an open circuit voltage of 0.59 V, and power conversion efficiency (3.101%) than OSC with ITO/Ag/ITO multilayer (2.8%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.473.1-473.1
• /
• 2014

We report on the characteristics of Zr-doped $In_2O_3$ (IZrO) films prepared by DC-RF magnetron cosputtering of $In_2O_3$ and $ZrO_2$ targets for use as a transparent electrode for high efficient organic solar cells (OSCs). The effect of $ZrO_2$ doping power on electrical, optical, structural, and surface morphology of the IZrO film was investigated in detail. At optimized $ZrO_2$ RF power of 50 W, the IZrO film exhibited a low sheet resistance of 20.71 Ohm/square, and a high optical transmittance of 83.9 %. Furthermore, the OSC with the IZrO anode showed a good cell-performance: fill factor of 61.71 %, short circuit current (Jsc) of $8.484mA/cm^2$, open circuit voltage (Voc) of 0.593 V, and power conversion efficiency (PCE) of 3.106 %. In particular, the overall OSC characteristics of the cell with the IZrO anode were comparable to those of the OSC with the conventional Sn-doped $In_2O_3$ (FF of 65.03 %, Jsc of $8.833mA/cm^2$, Voc of 0.608 V, PCE of 3.495 %), demonstrating that the IZrO anode is a promising alternative to ITO anode in OSCs.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.3
• /
• pp.185-192
• /
• 2007

Near-infrared spectroscopy(NIRS) was used to develop a rapid and efficient method to determine lignan glucosides in intact seeds of sesame(Sesamum indicum L.) germplasm accessions in Korea. A total of 93 samples(about 2 g of intact seeds) were scanned in the reflectance mode of a scanning monochromator, and the reference values for lignan glucosides contents were measured by high performance liquid chromatography. Calibration equations for sesaminol triglucoside, sesaminol($1{\rightarrow}2$) diglucoside, sesamolinol diglucoside, sesaminol($1{\rightarrow}6$) diglucoside, and total amount of lignan glucosides were developed using modified partial least square regression with internal cross validation(n=63), which exhibited lower SECV(standard errors of cross-validation), higher $R^2$(coefficient of determination in calibration), and higher 1-VR(ratio of unexplained variance divided by variance) values. Prediction of an external validation set(n=30) showed a significant correlation between reference values and NIRS estimated values based on the SEP(standard error of prediction), $r^2$(coefficient of determination in prediction), and the ratio of standard deviation(SD) of reference data to SEP, as factors used to evaluate the accuracy of equations. The models for each glucoside content had relatively higher values of SD/SEP(C) and $r^2$(more than 2.0 and 0.80, respectively), thereby characterizing those equations as having good quantitative information, while those of sesaminol($1{\rightarrow}2$) diglucoside showing a minor quantity had the lowest SD/SEP(C) and $r^2$ values(1.7 and 0.74, respectively), indicating a poor correlation between reference values and NIRS estimated values. The results indicated that NIRS could be used to rapidly determine lignan glucosides content in sesame seeds in the breeding programs for high quality sesame varieties.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.115-126
• /
• 2019

The purpose of this study is to analyze the characteristics of older women's torso shapes. The data was collected from the 7th Size Korea, which featured 453 women between the ages of 70-85. A factor analysis was performed of 31 indices, including seventeen based on height and length measurements, eight based on circumference measurements, and six based on torso flattening. The torso shape was determined from seven factors: torso flatness ratio, shape of the side upper torso, vertical size of upper torso, silhouette of the torso, silhouette of the bust and abdomen, shape of the hip, and the vertical size of the back of upper torso. The torso shapes of older women were classified into three types based on the results of the factor analysis. Type 1 is called the large rectangle type. They have the lowest degree of forward bend in the torso, the largest vertical and horizontal size, a round body shape, and the upper torso is gently curved. Type 2 is called the inverted triangle type. They also have a round body shape, but the abdominal size is relatively small compared to the size of the bust, and also have an open and drooping bust, and the biggest degree of forward bend in the torso. Type 3 is called the square type. They are characterized by drooping hips, the smallest vertical and horizontal sizes, and the gentlest curve of the torso.

• Health Policy and Management
• /
• v.23 no.4
• /
• pp.415-426
• /
• 2013

Background: This study was aim to identify the specific words and to develop the scale for the public health center (PHC) image. Methods: We collected 824 words from the previous studies and by open questions and reduced them by 77 words, then which were rated properly by 355 citizens of Seoul. We examined explanatory factor analysis for 69 words, and examined content validity test and confirmatory factor analysis (CFA) for the image structures (4 factors and 16 words). And then we developed the image questionnaire using them through council. We conducted a survey and retested the PHC image scales as the measuring tool targeting 2,000 persons, and compared the inexperience and experience persons for PHC usage. Results: The image structures were consisted of 4 factors and 16 words such as 'trustworthiness' (warm, exemplary, faithful, service-mindedness, beneficial to health), 'fairness' (honesty, clear, consistent, ruled), 'development possibility' (changing, goal-directed, developmental, propulsive), and 'flexibility' (not authoritative, not perfunctory, not rigid) in total. Cronbach's ${\alpha}$ values of all factors were above 0.7. As a result of CFA, model fit indexes yielded satisfactory results (root mean square error of approximation [RMSEA] 0.049, goodness of fit index [GFI] 0.937, and adjusted goodness of fit index [AGFI] 0.912). According to the result of retest for measuring tool by using other samples, Cronbach's ${\alpha}$ values were above 0.8, and model fit indexes yielded satisfactory results (RMSEA 0.059, GFI 0.952, AGFI 0.933). RMSEAs of the inexperiences and the experiences were each 0.59, 0.68. Conclusion: A reliable, valid, and generalizable scale was created for PHC image.

• Journal of Ginseng Research
• /
• v.40 no.4
• /
• pp.375-381
• /
• 2016

Background: We evaluated the drug interaction profile of Red Ginseng (RG) with respect to the activities of major cytochrome P450 (CYP) enzymes and the drug transporter P-glycoprotein (P-gp) in healthy Korean volunteers. Methods: This article describes an open-label, crossover study. CYP probe cocktail drugs, caffeine, losartan, dextromethorphan, omeprazole, midazolam, and fexofenadine were administered before and after RG supplementation for 2 wk. Plasma samples were collected, and tolerability was assessed. Pharmacokinetic parameters were calculated, and 90% confidence intervals (CIs) of the geometric mean ratios of the parameters were determined from logarithmically transformed data using analysis of variance after RG administration versus before RG administration. Results: Fourteen healthy male participants were evaluated, none of whom were genetically defined as poor CYP2C9, 2C19, and CYP2D6 metabolizers based on genotyping. Before and after RG administration, the geometric least-square mean metabolic ratio (90% CI) was 0.870 (0.805-0.940) for caffeine to paraxanthine (CYP1A2), 0.871 (0.800-0.947) for losartan (CYP2C9) to EXP3174, 1.027 (0.938-1.123) for omeprazole (CYP2C19) to 5-hydroxyomeprazole, 1.373 (0.864-2.180) for dextromethorphan to dextrorphan (CYP2D6), and 0.824 (0.658-1.032) for midazolam (CYP3A4) to 1-hydroxymidazolam. The geometric mean ratio of the area under the curve of the last sampling time ($AUC_{last}$) for fexofenadine (P-gp) was 0.963 (0.845-1.098). Administration of concentrated RG for 2 wk weakly inhibited CYP2C9 and CYP3A4 and weakly induced CYP2D6. However, no clinically significant drug interactions were observed between RG and CYP and P-gp probe substrates. Conclusion: RG has no relevant potential to cause CYP enzyme- or P-gp-related interactions.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.172-181
• /
• 2006

Universal designs begins from observing things. This paper understands contradiction and irrationality about drink bottle used unintentionally in our common life. Those have not found out until now. So an example observation about problem derivation and a practice method of Universal design is presented. People of various classes, such as a child, an old person and a woman, a male, the man in the street, and a disabled person, have been using drink bottle recently. However, the design of drink bottle has become on the basis of the fine and common man, so the other people, for example, children or handicapped persons experience many situations which cannot open cap or cannot be drunk without external help. This research posed questions from the children to the elders about drink bottle by the viewpoint of universal design paying attention to such problems. In the research result, the fixed quantity and qualitative quantity about problem are commented. And the fixed quantity utilized frequency analysis and chi-square verification ($X^2$) for the questionnaire result on the basis, and the qualitative quantity pointed out result in the universal design principle through the data of a precedence research result. An alternative plan for drink bottle's design is presented through case observation of conceptual approach to method of Universal design.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.3
• /
• pp.397-412
• /
• 1996

This study aims to present the fundamental strategies to improve the Indoor Air Quality (IAQ) in apartment buildings. To investigate the concentration of indoor air pollutants such as radon, formaldehyde, and VOCs, both the document survey and the field measurement were conducted. In addition, to identify the source of the air pollutants, the laboratory experiment was carried out for various building materials. Finally, the minimum period to be reserved befor3e building occupation to ensure healthy IAQ, which largely depends on the ventilation rates, was simulated using a simple compuer program. The results of this study can be summarized as follows: 1. In case of newly-constructed apartment houses, concentrations of formaldehyde, VOCs and radon were found to exceed the standard. Meanwhile, at existing apartment houses, concentrations of VOCs, particularly toluene and xylene, highly exceeded the standasrd level. Concentrations of formaldehyde and radon, however, had been lowered according to the duration of occupation. 2. The laboratory experiment of concentration of pollutants per square meter of building material surface area showed that radon gas was much emitted from the gypsumboard; formaldehyde from flooring and wallpaper; and VOCs from paints and kitchen furnishings. The emission rates of formaldehyde and VOCs were proportional to air temperature. 3. According to the simulation of the minimum period to be reserved before occupation, newly-constructed airtight houses required about 190-200 days, and naturally ventialted houses with fully-open-windows required about 20-45days, in order to keep the level of radon gas lower than standard. Therefore, with the current practice, the date of occupation should be delayed for about 15 days.

• Journal of the Korean Home Economics Association
• /
• v.12 no.2
• /
• pp.563-580
• /
• 1974

A Study of the Emotionality of Child and Mother The purpose of this study is primarily to understand the emotional climate of child and mother, which is a significant factor in child study and the home life. A sample was collected from a total of 1,592 of whom 796 are elementary school children with their mothers. Of these 796 children 440 are fom private schools, 190 from public schools in Seoul. The rest are taken from a farming area, 100 kilometers from Seoul. The data was basically obtained through answers to a questionaire distributed in September 1973. In this study, the cross-sectional method, percentage calculation and chi-square test are adapted from factor analysis. With this limited amount of data special attention now, the following conclusions can be drawn from this analysis although special attention should be given in making any kind of generalization about the entire population. 1) Children's emotionality (a) There is a higher percentage of emotionally well-adjusted children as opposed to maladjusted children.(51%>11%) (b) There is no correlation between children's emotionality and the following factors: grade, sex, residential area, school records, and educational level of their mothers. 2) Mother's Emotionality (a) There are more mothers who consider themselves happy than unhappy.(49%>2%) On the other hand a higher percentage of mothers reported feelings of tension and insecurity as compared to those who had feelings of firm security(65%>5%) (b) There is a high correlationshionship between marital adjustment and marital happiness. In other words, the more adjusted, the happier. A high marital happiness has strong influence on the preference of sex, on children's adjustment to their friends, and their present living condition. (c) There is a close relationship between a high marital adjustment and the social development of a child: being fond of fathers, homelife, and the acquaintance with many friends. In the same way, the positive emotionality of a mother in raising her children and their school records are also important. 3) Emotional relationship between a mother and her chid There is a close bond of love and respect between a mother and her child. Moreover, a high frequence of close and open-minded communication exist between them in a family. It is evident that the emotional climate of the mother has a strong and powerful influence on her child.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.11-22
• /
• 2002

In this study, an asymmetric lifting posture prediction model was developed, which was a three-dimensional model with 12 links and 23 degrees of freedom open kinematic chains. Although previous researchers have proposed biomechanical, psychophysical, or physiological measures as cost functions, for solving redundancy, they lack in accuracy in predicting actual lifting postures and most of them are confined to the two-dimensional model. To develop an asymmetric lifting posture prediction model, we used the resolved motion method for accurately simulating the lifting motion in a reasonable time. Furthermore, in solving the redundant problem of the human posture prediction, a moment weighted Joint Range Availability (JRA) was used as a cost function in order to consider dynamic lifting. However, it is known that the moment weighted JRA as a cost function predicted the lower extremity and L5/S1 joint motions better than the upper extremities, while the constant weighted JRA as a cost function predicted the latter better than the former. To compensate for this, we proposed a hybrid moment weighted JRA as a new cost function with moment weighted for only the lower extremity. In order to validate the proposed cost function, the predicted and real lifting postures for various lifting conditions were compared by using the root mean square(RMS) error. This hybrid JRA reduced RMS more than the previous cost functions. Therefore, it is concluded that the cost function of a hybrid moment weighted JRA can be used to predict three-dimensional lifting postures. To compare with the predicted trajectories and the real lifting movements, graphical validations were performed. The results also showed that the hybrid moment weighted cost function model was found to have generated the postures more similar to the real movements.