• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.552-556
• /
• 2001

Histamine and arachidonic acid (AA) release was measured using the P2-purinoceptor antaongists, phospholipase $A_2{\;}(PLA_2)$ and cyclooxygenase (COX)/lipoxygenase (LOX) inhibitors to determine whether or not ATP-induced histamine release is associated with arachidonic acid (AA) release in rat peritoneal mast cells. ATP increased histamine release in a dose dependent manner, whereas adenosine did not. PPADS (a selective P2X-purinoceptor antagonist) and suramin (a nonselective P2X,2Y-purinoceptor antagonist) inhibited ATP-induced histamine release in a dose dependent manner. However, RB-2 (a P2Y-purinoceptor antagonist) did not block ATP-induced histamine release. Manoalide and oleyloxyethyl phosphorylcholine (OPC), secretory PLA$_2$ inhibitors, also inhibited ATP-induced histamine release dose-dependently. Both COX inhibitors (ibuprofen and indomethacin) and LOX inhibitors (baicalein and caffeic acid) inhibited ATP-induced histamine in a dose dependent manner. ATP significantly increased [$^3H$]AA release by 54%. PPADS and suramin significantly inhibited ATP-induced [3H]Ph release by 81% and 39%, respectively. ATP-induced histamine release was significantly inhibited by a variety of protein kinase inhibitors, such as bisindolmaleimide, genistein, methyl 2,5-dihydroxycinnamate, W-7 and trifluoperazine. Overall, the results suggest that ATP-induced histamine release is in part related to the PLA2-mediated AA metabolism and P2X-purinoceptors.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.521-528
• /
• 2021

The high-density fiber composite manufacturing method by the extrusion molding method has the characteristic that continuous production is possible, and the product is molded through a mold forming a specific cross-section. OPC is used as a defect material, an appropriate amount of SiO₂ is supplied for CaO reaction activity, and high density and high strength are expressed through steam and autoclave curing. However, due to the use of organic reinforcing fibers, the flame duration exceeds the regulations during the non-combustible performance test, making it difficult to secure performance. In this study, the product was produced by mixing alkali-resistant organic fiber and fly ash having voids as a binder by replacing the existing polypropylene fiber. appeared to be possible.

• Advances in concrete construction
• /
• v.6 no.6
• /
• pp.561-583
• /
• 2018

A variety of polycarboxylate ether (PCE)-based superplasticizers are commercially available. Their influence on the rheological retention and slump loss in respect of concrete differ considerably. Fluidity and slump loss are the cardinal features responsible for the quality of concrete. These are related to the dispersion of cement particles and the hydration process which are greatly influenced by type of polycarboxylate ether (PCE)-based superplasticizers. On the backdrop of relatively less studies in the context of rheological retention of high strength self-consolidating concrete (HS-SCC), the experimental investigations were carried out aiming at quantifying the effect of the six different PCE polymers (PCE 1-6) on the rheological retention of HS-SCC mixes containing two types of Ordinary Portland Cements (OPC) and unwashed crushed sand as the fine aggregate. The tests that were carried out included $T_{500}$, V-Funnel, yield stress and viscosity retention tests. The supplementary cementitious materials such as fly ash (FA) and micro-silica (MS) were also used in ternary blend keeping the mix paste volume and flow of concrete constant. Low water to binder ratio was used. The results reveal that not only the PCEs of different polymer groups behave differently, but even the PCEs of same polymer groups also behave differently. The study also indicates that the HS-SCC mixes containing PCE 6 and PCE 5 performed better as compared to the mixes containing PCE 1, PCE 2, PCE 3 and PCE 4 in respect of all the rheological tests. The PCE 6 is a new class of chemical admixtures known as Polyaryl Ether (PAE) developed by BASF to provide better rheological properties in even in HS-SCC mixes at low water to binder mix. In the present study, the PCE 6, is found to help not only in reduction in the plastic viscosity and yield stress, but also provide good rheological retention over the period of 180 minutes. Further, the early compressive strength properties (one day compressive strength) highly depend on the type of PCE polymer. The side chain length of PCE polymer and the fineness of the cement considerably affect the early strength gain.

• Korean Journal of Agricultural Science
• /
• v.48 no.2
• /
• pp.283-297
• /
• 2021

Investigation of genetic diversity and molecular characterization in high yielding rice varieties is important for their identification. The experiment was conducted during 2016 - 2017 to analyse the genetic diversity of fifteen high yielding rice varieties in Bangladesh by using random amplification of polymorphic DNA (RAPD) markers. Polymorphism was revealed in 12 RAPD primers out of 30, whereas no other reaction was detected on the remaining 18 primers. The 40 out of 45 bands (88.89%) polymorphics were produced by the primers and ranged from 50 to 100%. The maximum number of polymorphic bands was produced by the primer OPB-18 whereas the lowest number of polymorphic bands belonged to OPC-12. The genetic similarity coefficients were determined with the RAPD data, which ranged from 0.47 to 0.94. The unweighted paired group of arithmetic means (UPGMA) dendrogram presented the studied rice varieties into two major clusters. Moreover, the value of Nei's genetic diversity is 0.26 and the Shanon information index is 0.41. The study produced distinct positions, suggesting that the genotypes were different from each other. The results indicated that these markers could be efficient for comparing the genetic relationships, patterns of variation, and measurement of genetic distance among rice varieties. Considering all of these results, RAPD analysis is found to be an effective tool for estimating the genetic diversity of different rice varieties. The outcomes of this research may contribute to the germplasm data of rice accessions and a future breeding program of rice genotypes.

• Advances in concrete construction
• /
• v.11 no.5
• /
• pp.419-428
• /
• 2021

The pH of cement-based materials (CBMs) is an important factor for their durability, sustainability, and long service life. Currently, the use of supplementary cementitious materials (SCMs) is becoming mandatory due to economic, environmental, and sustainable issues. There is a decreasing trend in pH of CBMs due to incorporation of SCMs. The determination of numerical values of pH is very important for various low and high volume SCMs blended cement mortars for the better understanding of different defects and durability issues during their service life. In addition, the effect of cement hydration and pozzolanic reaction of SCMs on the pH should be determined at initial and later ages. In this study, the effect of low and high-volume fly ash (FA) and ground granulated ballast furnace slag (GGBFS) cement mortars in different curing conditions on their pH values has been determined. Thermal gravimetric analysis (TGA) was carried out to support the findings from pH measurements. In addition, thermal conductivity (k-value) and strength activity indices of these cement mortars were discussed. The results showed that pH values of all blended cement mortars were less than ordinary Portland cement (OPC) mortar in all curing conditions used. There was a decreasing tendency in pH of all mortars with passage of time. In addition, the pH of cement mortars was not only dependent on the quantity of Ca(OH)₂. The effect of adding SCMs on the pH value of cement mortar should be monitored and measured for both short and long terms.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.1-12
• /
• 2021

The present study proposes the modified-stoichiometric model for describing hydration of sodium silicate-based alkaliactivated slag(AAS), and compares the results with the thermodynamic modelling-based calculations. The proposed model is based on Chen and Brouwers(2007a) model with updated database as reported in recent studies. In addition, the calculated results for AAS are compared to those for hydrated portland cement. The maximum difference between the proposed model and the thermodynamic calculation for AAS was at most 20%, and the effects of water-to-binder ratio and activator dosages were identically described by both approaches. In particular, the amount of non-evaporable water was within 10% difference, and was in excellent agreement with the experimental results. Nevertheless, notable deviation was observed for the chemical shrinkage, which is largely dependent on the volume of hydrates and pores.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.289-297
• /
• 2022

Deterioration in durability of structures due to the steel corrosion is difficult to determine whether or not corrosion is initiated and how much propagated, and moreover, repair and maintenance are not easy to deal with. Therefore, preventive treatments can be the best option to avoid the deterioration. Various methods for preventing corrosion of steel, such as electrochemical treatments, anti-corrosion agents and steel surface coatings, are being developed, but economic and environmental aspects make it difficult to apply them to in-situ field. Thus, the purpose of this study was to improve corrosion resistance by using CA-based clinker that are relatively simple and expected to be economically profitable Existing CA-based clinkers had problems such as flash setting and low strength development during the initial hydration process, but in order to solve this problem, CA clinker with low initial reactivity were used as binder in this study. The cement paste used in the experiments was replaced with CA₂ clinker for 0%, 10%, 20%, and 30% in OPC. And the mixture used in the chloride binding test for the extraction of water-soluble chloride was intermixed with Cl- 0.5%, 1%, 2%, and 3% by weight of binder content. To evaluate characteristic of hydration heat evolution, calorimetry analysis was performed and simultaneously chloride binding capacity and acid neutralization capacity were carried out. The identification of hydration products with curing ages was verified by X-ray diffraction analysis. The free chloride extraction test showed that the chlorine ion holding ability improved in order OC 10 > OC 30 > OC 20 > OC 0 and the pH drop resistance test showed that the resistance capability in pH 12 was OC 0 > OA 10 > OA 20 > OA 30. The XRD analyses showed that AFm phase, which can affect the ability to hold chlorine ions, tended to increase when CA₂ was mixed, and that in pH12 the content of calcium hydroxide (Ca(OH)₂), which indicates pH-low resistance, decreased as CA₂ was mixed

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.84-84
• /
• 2020

새만금은 농업용지 확보 등 다양한 용도의 토지이용을 목적으로 방조제 공사를 수행하였으며, 새만금 종합개발계획(Master Plan, OPC, 2011)에 의하여 호내의 준설을 계획하고 있다. 그러나 방조제 준공 후 새만금 호내의 수질오염 문제가 지속적으로 발생되어 왔다. 수질오염의 문제를 해결하기위해서 강변저류지 설치, 하수종말 처리장 등 다양한 구조적 대책이 수립되고 시행되었지만, 수질개선 효과는 상대적으로 미비하였다(Kim et al, 2016; KRCC, 2016). 본 연구에서는 새만금 호내의 수질개선을 위하여, 다양한 배수갑문 운영에 따른 수질인자의 잔존률 및 하상의 변화를 SCHISM-CoSiNE(Semi-implicit Cross-scale Hydroscience Integrated System Model and Carbon, Silicate, Nitrogen Ecosystem model) 모형을 통하여 검토하고자 한다. 수치모형의 하상변동 및 수질변화에 대한 정확한 수치계산 여부를 판단하기 위하여 van Rijn(1987) 실험 및 새만금호내의 수질 관측자료(DO, T-N, T-P, 온도, 염도, 새만금유역 통합환경관리시스템)를 이용하여 수치모형 검증을 수행하였고 10% 이내의 오차를 나타내었다. 배수갑문 운영기록(Jeong et al., 2018)을 참조하여 배수갑문 운영을 재현하였으며, 지형은 기 수립된 MP 내 새만금 종합개발계획이 완료된 시점인 2030년을 기준으로 하였다. 수치모의를 통하여, 배수갑문 운영 및 계절의 변화에 따른 최심 하상변동고 변화 및 하상변동량을 확인하여 침식 퇴적 구간을 구분하였고, 호내의 잔존하는 수질인자의 농도를 통하여 수질개선 효과를 평가하여 수질측면에서 최적의 배수갑문 운영방안을 제시하였다. 본 연구는 배수갑문 운영이 새만금 호내의 수질 및 지형에 미치는 영향에 대한 기초적인 연구이지만 향후에는 다양한 수질인자 및 시나리오를 고려한다면 보다 근본적인 수질오염 해결방안으로 활용이 가능할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.205-211
• /
• 2006

The purpose of this study was to evaluate the effects of fly-ash on strength development and durability of latex-modified concrete (LMC) and ordinary portland cement concrete (OPC). Main experimental variables were latex contents (0%, 10%, 15%) and fly-ash content (0, 10%, 20%, 30%). Air content and slump tests were performed to check the basic properties of fresh concretes, and compressive strength, flexural strength, rapid chloride ion permeability and chemical resistance were measured to analyze the basic properties of hardened concretes. The test results showed that air contents of LMC with fly ash decreased as fly-ash contents increased from 0% to 30%. Compressive and flexural strength developments of LMC with fly ash were quite similar to those of LMC without fly ash. However, the long-term flexural strength development of LMC with fly ash after 90 days were bigger than that of LMC without fly ash. Chloride ion permeability and chemical resistance decreased rapidly as the content of fly ash increased. Thus, fly ash could be used at LMC in order to reduce water permeability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.97-105
• /
• 2006

The autogenous shrinkage of high-performance concrete is important in that it can lead the early cracks in concrete structures. The purpose of the present study is to explore the autogenous shrinkage of high-performance concrete with admixture and to derive a realistic equation to estimate the autogenous shrinkage model of that. For this purpose, comprehensive experimental program has been set up to observe the autogenous shrinkage for various test series. Major test variables were the type and contents of admixture and water-cement ratio is fixed with 30%. The autogenous shrinkage of HPC with fly ash slightly decreased than that of OPC concrete, but the use of blast furnace slag increased the autogenous shrinkage. Also, the autogenous shrinkage of HPC is found to decrease with increasing shrinkage reduction agent and expansive additive. A prediction equation to estimate the autogenous shrinkage of HPC with admixture was derived and proposed in this study. The proposed equation show reasonably good correlation with test data on autogenous shrinkage of HPC with mineral and chemical admixture.