• 청정기술
• /
• 제18권1호
• /
• pp.14-21
• /
• 2012

친환경 건축물에 사용되는 미네랄울, 폴리우레탄 등 전통적인 단열재로부터 최근에 주목받고 있는 VIP (Vacuum Insulation Panel), 에어로젤, 그리고 미래기술로 연구되고 있는 VIM (Vacuum Insulation Material), DIM (Dynamic Insulation Material) 등 단열재 및 단열 시스템의 특성과 장단점을 비교하였다. 매우 낮은 열전도율을 지닌 VIP 및 에어로젤은 기존 단열재에 비해 에너지 소모를 줄일 수 있으므로 주거면적을 크게 확대할 수 있는 장점이 있으며, 특히 에어로젤은 반투명 및 투명재질로 만들 수 있어 건물에 응용될 수 있는 가능성이 매우 크다. 단열재는 낮은 열전도율뿐만 아니라, 건설현장 응용성, 기계적강도, 내화성, 비용 및 환경영향 등을 고려하여야 하므로, 전통적인 단열재 및 최신 단열재를 활용하고 지속적으로 개선시키는 노력을 해야 할 것이다.

• 한국패류학회지
• /
• 제28권1호
• /
• pp.55-64
• /
• 2012

Ultrastructural studies of germ cell development during spermatogenesis and taxonomic values in mature sperm morphology of Argopecten irradians irradians were investigated by transmission electron microscopic observations. In the early stage of spermatid during spermiogenesis, a few granules and proacrosomal granules are formed by the Golgi complex. In the late stage of spermatid during spermiogenesis, a proacrosomal vesicle becomes an acrosomal vesicle in the acrosome through spermiogenesis. The sperm is approximately $ 45-48{\mu}m$ in length including a jar-shaped sperm nucleus (about $1.45{\mu}m$ long), an acrosome (about $0.34{\mu}m$ long) and tail flagellum. The axoneme of the sperm tail shows a 9+2 structure. As one of common characteristics of mature sperm morphologies in Pectinidae species in subclass Pteriomorphia, mature spermatozoon consists of the cone-shaped acrosomal vesicle and subacrosomal material on the invaginated jar-shaped nucleus. The acrosomal vesicle of this species is composed of electron high dense opaque part (material) from the base to the tip, as have seen in the species in the subclass Pteriomorphia. Exceptionally, five mitochondria are found in the sperm midpiece of this species, unlike four in most species of Pectinidae in subclass Pteriomorphia. However, the acrosomal vesicle of spermatozoa of A. irradians irradians resemble to those of other investigated Pectinidae species in subclass Pteriomorphia. Therefore, we can use sperm morphology as a tool in the resolution of taxonomic relationships within the Pectinidae species. These morphological charateristics of acrosomal vesicle belong to the family Pectinidae in the subclass Pteriomorphia.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.168-174
• /
• 2021

Purpose: This study was conducted to investigate alloys spectrophotometrically including yttrium of nickel-chromium (Ni-Cr) alloys, which are used as substitutes for the regulation of beryllium and provide helpful improvements in Ni-Cr alloys. Methods: Four groups of specimens (ZN, ZY, SN and EM) were prepared for analysis. Color parameters were measured with a spectrophotometer, and color difference (∆E^*) was calculated. The t-test and one-way analysis of variance test were used to determine significant difference, and the Tukey test was used to identify where the differences were. To measure the spectroscopic reflectivity, the spectroscopic reflectance was measured and converted into CIE L^*, a^*, b^* color system. Results: The ∆E^* value of each metal ceramic group after opaque firing of Ni-Cr alloy with and without yttrium was <2, and the total group color difference (∆E^*) was below 1 in the dentin ceramic all experimental group. However, the a^* and b^* values of the metal ceramic groups were higher than that in the lithium disilicate all ceramic group, and the chroma was higher than the natural tooth. The brightness of all experimental groups was similar to that of the shade guide sample. Conclusion: Yttrium added to Ni-Cr alloys showed similar CIE L^*, a^*, b^* values to Ni-Cr alloys that did not contain yttrium, indicating that yttrium had no effect on color in metallic ceramic systems.

• 한국패류학회지
• /
• 제27권2호
• /
• pp.149-157
• /
• 2011

Some characteristics of the formations of acrosomal vesicles during the late stage of spermatids during spermiogenesis and taxonomical charateristics of sperm morphology in male two species (Saxidomus purpurata and Meretrix petechialis) in the family Veneridae were investigated by electron microscope observations. In two species, the morphologies of the spermatozoa have the primitive type and are similar to those of other bivalves in that it contains a short midpiece with five mitochondria surrounding the centrioles. The morphologies of the sperm nuclear types of S. purpurata and M. petechialis in Veneridae have the curved cylindrical and cylinderical type, respectively. And the acrosome shapes of two species are the same cap-shape type. In particular, the axial filament is not found in the lumen of the acrosome of two species, however, subacrosomal material are observed in the subacrosomal spaces between the anterior nuclear fossa and the acrosomal vesicle of two species. The spermatozoon of S. purpurata is approximately 46-$52{\mu}m$ in length, including a curved sperm nucleus (about $3.75{\mu}m$ in length), a long acrosome (about $0.40{\mu}m$ in length),and a tail flagellum (about 45-$47{\mu}m$ long). And the spermatozoon of M. petechialis is approximately 47-$50{\mu}m$ in length including a slightly curved sperm nucleus (about $1.50{\mu}m$ in length), an acrosome (about $0.56{\mu}m$ in length) and tail flagellum (44-$48{\mu}m$ in length). In two species, the axoneme of the sperm tail flagellum of each species consists of nine pairs of microtubules at the periphery and a pair of cental doublets at the center. Therefore, the axoneme of the sperm tail flagellum shows a 9 + 2 structure. In particular, taxonomically important some charateristics of sperm morphologies of two species in the family Veneridae are acrosomal morphology of the sperm, The axial filament is not found in the acrosome as seen in a few species of the family Veneridae in the subclass Heterodonta. The acrosomal vesicle is composed of right, left basal rings and the apex part of the acrosomal vesicle. In particular, right and left basal rings show electron opaque part (region), while the apex part of the acrosomal vesicle shows electron lucent part (region). These charateristics belong to the subclass Heterodonta, unlikely a characteristic of the subclass Pteriomorphia showing all part of the acrosome being composed of electron opaque part (region). Therefore, it is easy to distinguish the families or the subclasses by the acrosomal structures. The number of mitochondria in the midpiece of the sperm of S. purpurata and M. petechialis in Veneridae are five. However, the number of mitochondria in the midpiece of the sperm in most species of Veneridae in the subclass Heterodonta are four. Therefore, the number of mitochondria of the sperm midpiece of two species are exceptionally 5, and it is only exceptional case in the species in Veneridae in the subclass Heterodonta. Except these cases, the number of mitochondria in the sperm midpiece in all families in the subclass Heterodontaare are 4, and now widely used in taxonomic analyses.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.656-673
• /
• 2003

Statement of problem : Long-term exposure of dental porcelain to saliva during temporary cementation of a porcelain-fused to metal (PFM) restoration could affect mechanical strength of dental porcelain if the restoration is refired. Purpose : This work was performed to verify the effect of water on the mechanical strength in aged dental porcelain. Material and method : 63 specimens(Vintage Metalbond opaque and opal powder) were distributed to three experimental groups ; non-water immersed control, immersed and pedried, and immersed and non-predired groups. The changes in flexural strength and fracture toughness after specimen refiring related to Fourier Transform Infrared (FT-IR) spectroscopy. Results : 1. The FT-IR reflectances assigned to molecular bonds of $H_2O$ were noted as significantly different between the first-fired group and three refired groups and between two water-immersed groups and control group after refiring(p<0.05). They were also significantly different between predried group and non-predried group after refiring(p<0.05) 2. For opal specimens, FT-IR absorbances for hydrogen bond of $H_2O$ and silanols were significantly higher in non-predried group than in predreid group(p<0.05). 3 Predried opal group showed the highest mean flexural strength(p<0.05). Non-predried group indicated higher mean flexural strength than control group(p<0.05). 4. The mean fracture toughness for predired group was higher than non-predried group(p<0.05). 5. The difference of leucite crystal size is noted between control group and water-immersed, predried group in scanning electron microscopic study(${\times}10000$).

• 암석학회지
• /
• 제8권2호
• /
• pp.81-91
• /
• 1999

옥천화강암은 옥천읍 일대에서 원형상으로 분포하며, 그 북부와 동부 및 남부에서 옥천층군을 관입한 쥬라기 암체이며 그 서부에서 백악기의 석영반암류에 의해 관입된다. 이 암체는 중립질의 흑운모 화강으로서 유색광물부(mafic enclave)가 종종 발달하며 북부 주변에서는 미약한 엽리구조를 이루기도 한다. 구성광물은 석영, 사장석, 알칼리장석, 흑운모, 스펜과 녹리석 등이다. 복부일부에 발달하는 미립질과 줄무늬 석영, 흑운모와 이차광물인 백운모 등이 이루는 엽리는 옥천화강암질 마그마의 유동중에 주변암에 의해 형성된 구조이다. QAP 모드분석에서 몬조화강암-화강섬록암에 도시되는 과알루미나암질로서 캘크 알칼리례열에 속하는 분화경향을 가진다. SiO2 대 주원소 그리고 미향원소 등의 관계도에서 단일 마그마의 분화경향을 뚜렷이 가진다. 콘드라이트로 표준화한 희토류원소는 경(LREE)에서 중(HREE)으로 갈수록 점진적으로 결핍되며 Eu/Eu*는 0.84의 부 이상값(negative anomaly)을 가져 대체로 국내 쥬라기 화강암류와 유사한 특성을 가진다. 동시충돌대의 지구조적환경에서 I-형의 지각물질이 용융하여 형성된 화강암질 마그마가 다소 빠르게 상승하여 옥천층군내에 정치된 암체이다.

• 교육시설
• /
• 제2권2호
• /
• pp.17-25
• /
• 1995

Because of energy crisis and environment pollution, we have become more conscious of the need to conserve heat in buildings. In response to this need. new requirements have been developed for insulation and other matters relating to energy consumption. Among others, more promising is to use the energy that is all around us in the dynamic forces of nature:the wind, tides, waves, rivers, geothermal hot spots, and the sun. The problem is that we have not been forced to find the technological means to convert these natural energies into usable forms because it has been too easy simply to dig or pump our energy out of the ground. Now, the problem is not a shortage of energy itself, but a shortage of technology for converting the energy that lies aoo around us into usable forms. Energy-conversion technology is the real issue, and solar energy is one of the brightest and most promising frontiers in energy conversion. All buildings are wrapped in a skin. Generally skins protect the person in stay from rain, wind, dust, noise, cold, hot etc.. However, there are some skins that provide energy from given environment into the building. Out of aoo, transparent insulation material is one of these materials that most effectively satisfies this kind of envelope function. Since, there are no research on transparent insulation in Korea, it has been studied very actively in Europe and in America. Thus, in this thesis, we will theoratically study and analyze how the heat flows through a trans arrent insulated opaque wall of a school building in Korea. It will be an important information for the effective using guidelines of transparent insulation materials in Korea.

• 보존과학회지
• /
• 제20권
• /
• pp.105-117
• /
• 2007

사적 제450호 사천 늑도 유적에서 출토된 구슬의 분석을 통하여 이 유적의 고대유리 문화의 특성을 확인하고 이를 경상도 지역 출토 고대유리의 특성과 비교하였다. 시료는 광학현미경과 SEM을 이용하여 미세구조를 관찰하고 비중측정을 통해 물성을 확인하였다. SEM-EDS를 이용하여 유리의 구성 요소인 융제, 안정제, 착색제의 조성을 분석하였으며, XRD를 이용하여 기타 구슬시료의 재질을 조사하였다. 조개구슬로 분류한 백색 불투명 구슬은 비정질의 규산염계 물질로 확인되었으며, 청색 계열의 유리구슬은 포타쉬유리군($SiO_2-K_2O$ group). LCA(Low-CaO, $Al_2O_3$) 계통으로 색상별로 벽색과 청록색은 LCA-A(LCA-CaO<$Al_2O_3$) 계통, 감색은 LCA-B(LCA-CaO>$Al_2O_3$) 계통으로 확인된다. 이를 경상도지역에서 출토된 고대유리와 비교하면 AD $2{\sim}3$세기 이전의 포타쉬유리와 유사한 특징을 보인다.

• Advances in Traditional Medicine
• /
• 제7권1호
• /
• pp.51-64
• /
• 2007

Mucus is an aqueous gel complex with a constitution of about 95% water, high molecular weight glycoprotein (mucin), lipid, salts etc. Mucus appears to represent a significant barrier to the absorption of some compounds. Natural mucoadhesive agent was isolated and purified from the aqueous extract of the seeds of prosopis pallida (PP). Formulated tablet with the isolated material by wet granulation method. Some natural edible substances are in consideration for candidates as mucoadhesive agents to claim more effective controlled drug delivery as an alternative to the currently used synthetic mucoadhesive polymers. Subjected the materials obtained from natural source i.e. PP and standard synthetic substance, sodium carboxymethyl cellulose for evaluation of mucoadhesive property by various in vitro and in vivo methods. Through standard dissolution test and a model developed with rabbit, evaluated in vitro controlled release and bioadhesive property of theophylline formulation. Mucoadhesive agent obtained from PP showed good mucoadhesive potential in the demonstrated in vitro and in viνo models. The results suggest that the mucoadhesive agent showed controlled release properties by their application, substantially. In order to assess the gastrointestinal transit time in vivo, a radio opaque X-ray study performed in healthy rabbit testing the same controlled release formulation with and without bioadhesive polymer. Plasma levels of theophylline determined by the HPLC method and those allowed correlations to the in vitro mucoadhesive study results. Better correlation found between the results in different models. PP may acts as a better natural mucoadhesive agent in the extended drug delivery system.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.47-76
• /
• 1994

This study was carried out to evaluate the effect of the crack propagation characteristics and bond stress of ceramo-metal system. In order to characterize the crack propagation, the static crack propagation stored in $37^{\circ}C$ distilled water of two commerical porcelains and the dynamic crack propagation under cyclic flexure load of ceramo-metal system were examined. In order to characterize the bond stress, the shear bond test, the 3-point flexure bond test, and the finite element stress analysis of ceramo-metal system were conducted. The results obtained were as follows : 1. Bulk densities and Young's moduli of opaque porcelains increased with repeated firing. 2. Maximum fracture toughness during 4 firing cycles showed at the group of 4 firing cycles in Ceramco porcelain and 2 firing cycles in Vita porcelain. 3. Shear bond strength and flexure bond strength of Ceramco-Verabond specimen were larger than those of Ceramco-Degudent G specimen (p<0.05). 4. Interfacial stresses under three point flexure bond test were concentrated at the edges of ceramometal system. 5. When a cyclic flexure load was applied, the crack growth rate of porcelain surface of ceramometal specimens was decreased as load cycles increased.