• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.771-774
• /
• 1999

This study was carried out to quantitatively investigate the amount of corrosion at the time of onset of cracks in cover concrete due to rebar corrosion. In this experiments, the accelerated galvanostatic corrosion method was carried out. FEM analyses were also conducted to investigate the expansive behaviors due to rebar corrosion and the mechanical properties of corrosion products. As a result, it was concluded that the corrosion ratio at the time of onset of cracks in cover concrete was 3% by weight. The onset of cracks in cover concrete due to rebar corrosion could be analyzed by the finite element method.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.459-465
• /
• 2002

This study was performed to identify the proper analytical conditions of endotoxins regarding optical density in the workplace where metalworking fluids are used. This study found that "onset time method" was more accurate than "time to $V_{max}$ method". Reproducibility and accuracy analyzed by "onset time method" was greatly higher than the "time to $V_{max}$". The optical density of "0.03" was the most appropriate analytical condition among "onset time method". In this analytical condition, linearity of 0.998 was obtained and recovery rate ranged from 88% to 105% at the endotoxin concentrations below 5 EU/mL. No significant difference of endotoxins was observed between the optical densities of "0.03" and "0.05". However, correlation coefficients were different with statistical significance (p<0.01). This study confirmed that either the optical densities "0.03" or "0.05" should be used to analyze endotoxin. Of these optical density values, OD with correlation coefficient higher than 0.98 should be used to analyze endotoxin in environmental samples.

• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.55-64
• /
• 2018

Purpose : The purpose of this study was to investigate the effect of the sprinter and skater combined patterns on muscle contraction onset time and muscle activation of body stabilizing muscles. Method : Our study included young and healthy men in their 20s. The participants used the sprinter and skater combined patterns of the proprioceptive neuromuscular facilitation (PNF) methods to measure muscle activation and muscle contraction onset time of the trunk muscles. To measure muscle contraction onset time and muscle activation, electrodes were attached to the rectus abdominis (RA), external oblique (EO), internal oblique (IO), and erector spinalis (ES) regions. Significant differences were identified using a paired t-test and a one-way analysis of variance (ANOVA) analysis. Result : In the sprinter combined pattern, the muscle with the fastest onset time of contraction was the RES, and that with the slowest was the RRA (p<.001). In the skater combined pattern, the muscle with the fastest onset time of contraction was the LES, and that with the slowest was the LRA (p<.001). In the sprinter combined pattern, the REO and LIO presented medium muscle contraction onset times (p<.001). In the skater combined pattern, the LEO and RIO presented medium muscle contraction onset times (p<.001). Conclusions: Based on these results, these patterns could be used as exercise methods for the elderly with delayed proactive response speeds of the body stabilization methods due to imbalances in body stabilizing muscles or limbs movement.

• The Journal of Korea Robotics Society
• /
• v.18 no.4
• /
• pp.496-504
• /
• 2023

This paper recognizes the motion intention of the wearer using a muscle stiffness sensor and proposes a control system for a wearable robot based on this. The proposed system recognizes the onset time of the motion using sensor data, determines the assistance mode, and provides assistive torque to the hip flexion/extension motion of the wearer through the generated reference trajectory according to the determined mode. The onset time of motion was detected using the CUSUM algorithm from the muscle stiffness sensor, and by comparing the detection results of the onset time with the EMG sensor and IMU, it verified its applicability as an input device for recognizing the intention of the wearer before motion. In addition, the stability of the proposed method was confirmed by comparing the results detected according to the walking speed of two subjects (1 male and 1 female). Based on these results, the assistance mode (gait assistance mode and muscle strengthening mode) was determined based on the detection results of onset time, and a reference trajectory was generated through cubic spline interpolation according to the determined assistance mode. And, the practicality of the proposed system was also confirmed by applying it to an actual wearable robot.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.51-62
• /
• 2003

The purpose of this study was to compare the relative accuracy of a range of computer-based analysis with respect to EMG onset determined visually by an experienced examiner. Ten healthy students (6 male, 4 female) were recruited and three times randomly selected trials of isometric contraction of wrist flexion and extension were evaluated using four technique. These methods were compared which varied in terms of EMG processing, threshold value and the number of samples for which the mean must exceed the defined threshold, and beyond 7% of maximum amplitude. To identify determination of onset time, ICCs(Intraclass Correlation Coefficients) was used and inter-rater arid intra-rater reliability ranged good in visually derived onset values. The results of this study present that in wrist flexion and extension, the reliability of the inter and intra-examiner muscle contraction onset times through visual analysis showed beyond .971 with ICCs. The reliability of the muscle contraction onset time decision through visual reading, tested with computer analysis, showed a relationship of all the selected analysis methods with ICCs .859 and .871. The objective computer-based analysis comparing with visual reading at the same time is the effective and qualitative data analysis method, considering the specificity of each study method.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.44-46
• /
• 2002

This study was conducted to identify the proper analytical conditions regarding optical density for endotoxin analysis in the workplace using metalworking fludis. Our study found the "onset method" was more accurate than "time to Vmax" Reproducibility and accuracy analyzed by "onset method" was more greater than those by "time to Vmax""0.03"of optical density was the most appropriate analytical condition among onset method. Through this analytical condition, 0.998 of linearity was obtained and recovery rate ranged from 88％ to 105％ at endotoxin concentration below 5 EU/$m\ell$. No significant difference of endotoxins between "0.03"and "0.05" of optical density was observed from this study. Furthermore, correlation coefficients between them were statistically significant(p＜0.01). This study concluded that 0.03”or "0.05" of optical density is used to analyze endotoxin. Of these optical density value, value with higher linearity should be used to analyze endotoxin in environmental samples.

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.71-76
• /
• 2003

Accurate estimation of the first arrival travel time is an essential task to obtain a high resolution velocity tomogram. Accuracy of the travel time estimation may be influenced by two factors; geological and mechanical. A serious mechanical factor is the source firing control problems. We found the control problems in the records generated by tome impulsive borehole sources. The problems are; irregular firing control and uncertainty in estimation of the absolute firing-times shown in records. Definitely, the time difference will introduce an error to the first arrival times, and accordingly; it will cause some distortion in the resulting velocity tomogram. A method to determine the firing time is suggested here. The method determines the optimum onset time by comparing the horizontal and the NMO velocity with various amount of delay time adjustment.

• Speech Sciences
• /
• v.9 no.1
• /
• pp.17-26
• /
• 2002

Voice onset time (VOT) is defined as the time interval from the oral release of a stop consonant to the onset of glottal pulsing in the following vowel. VOT is a temporal characteristic of stop consonants that reflects the complex timing of glottal articulation relative to supraglottal articulation. There have been many reports on efforts to clarify the acoustical and physiological properties that differentiate the three types of Korean stops, including acoustic, fiberscopic, aerodynamic and electromyographic studies. In the acoustic and fiberscopic studies for stop consonants, the voice onset time and glottal width during the production of stops has been known as the longest and largest in the heavily aspirated type followed by the slightly aspirated type and unaspirated types. The thyroarytenoid and posterior cricoarytenoid muscles were physiologically inter-correlated for differentiating these types of stops. However, a review of the English literature shows that the fine movement of the mucosal edges of the vocal folds during the production of stops has not been well documented. In recent. years, a new method for high-speed recording of laryngeal dynamics by use of a digital recording system allows us to observe with fine time resolution. The movements of the vocal fold edges were documented during the period of stop production using a fiberscopic system of high speed digital images. By observing the glottal width and the visual vibratory movements of the vocal folds before voice onset, the heavily aspirated stop was characterized as being more prominent and dynamic than the slightly aspirated and unaspirated stops.

• Physical Therapy Korea
• /
• v.13 no.4
• /
• pp.56-63
• /
• 2006

This study examined the effects of the abdominal drawing-in (ADI) maneuver using a pressure biofeedback on muscle recruitment pattern of erector spinae and hip extensors and anterior pelvic tilt during hip extension in the prone position. Fourteen able-bodied volunteers, who had no medical history of lower extremity or lumbar spine disease, were recruited for this study. The muscle onset time of erector spinae, gluteus maximus, and medial hamstring and angle of anterior pelvic tilt during hip extension in prone position were measured in two conditions: ADI maneuver condition and non-ADI maneuver condition. Muscle onset time was measured using a surface electromyography (EMG). Kinematic data for angle of anterior pelvic tilt were measured using a motion analysis system. The muscle onset time and angle of anterior pelvic tilt were compared using a paired t-test. The study showed that in ADI maneuver during hip extension in prone position, the muscle onset time for the erector spinae was delayed significantly by a mean of 43.20 ms (SD 43.12), and the onset time for the gluteus maximus preceded significantly by a mean of -4.83 ms (SD 14.10) compared to non-ADI maneuver condition (p<.05). The angle of anterior pelvic tilt was significantly lower in the ADI maneuver condition by a mean of 7.03 degrees (SD 2.59) compared to non-ADI maneuver condition (15.01 degrees) (p<.05). The findings of this study indicated that prone hip extension with the ADI maneuver was an effective method to recruit the gluteus maximus earlier than erector spinae and to decrease anterior pelvic tilting.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.279-285
• /
• 2011

We perform a numerical study to determine the time of onset of natural convection in a transient hot wire (THW) device for measuring the thermal conductivity of nanofluids. The samples used in this simulation are water-based $Al_2O_3$ nanofluids with volume fractions of 1%, 4%, and 10%, and the properties are calculated by theoretical models and experimental correlations. The THW apparatus using coated wire is modeled by the control-volume-based finite difference method, and the start of natural convection is determined by observing the temperature rise of the wire under a gravity field. The onset time is 11.5 s for water and 41.6 s for water-based $Al_2O_3$ nanofluids predicted by Maxwell thermal conductivity model with a 10% volume fraction. We confirm that the onset time of natural convection of nanofluids in the cylinder increases with the nanoparticle volume fraction. We suggest a correlation for predicting the onset time on the basis of the numerical results. Finally, it is shown that the measurement error due to natural convection is negligible if the measurement using the transient hot wire method is completed before the onset of natural convection in the base fluid.