• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1754-1766
• /
• 2015

Packet classification carried out in Internet routers is one of the challenging tasks, because it has to be performed at wire-speed using five header fields at the same time. In this paper, we propose a leaf-pushed AQT bitmap trie. The proposed architecture applies the leaf-pushing to an area-based quad-trie (AQT) to reduce unnecessary off-chip memory accesses. The proposed architecture also applies a bitmap trie, which is a kind of multi-bit tries, to improve search performance and scalability. For performance evaluation, simulations are conducted by using rule sets ACL, FW, and IPC, with the sizes of 1k, 5k, and 10k. Simulation results show that the number of off-chip memory accesses is less than one regardless of set types or set sizes. Additionally, since the proposed architecture applies a bitmap trie, the required number of on-chip memory accesses is the 50% of the leaf-pushed AQT trie. In addition, our proposed architecture shows good scalability in the required on-chip memory size, where the scalability is identified by the stable change in the required memory sizes, as the size of rule sets increases.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.767-771
• /
• 1999

Poly(ester-imide)(PEI) for the electrical insulation coating was synthesized and evaluated with one-step method as well as two-step method. For the synthesis of poly(ester-imide), imide repeat unit of N,N'-(4,4'-diphenylmethane) bistrimellitimide(DID) was initially made from trimellitic anhydride(TMA) and methylene dianiline(MDA), followed by the second stage reaction of esterification. One-step reaction was performed by reaction of TMA, MDA, dimethyl terephthalate(DMT), ethylene glycol(EG), and 1,3,5-tris-(2-hydroxy ethyl) isocyanurate(THEIC) in m-cresol solvent at a time. The synthesized poly(ester-imide) was cured with xylene, P-5030K(phenol-formaldehyde resin), TK-8(TDI type blocked polyisocyanate) and tetrapropyltitanate(TPT). It was found that the content of hydroxyl group, amount of DMT, and imide repeat unit played important role for the properties of electrical insulation coating film.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.211-223
• /
• 1992

The results of the researches in the wig and the Boyo are as follows. The wig is to be classified into Bu, Pyun, Chah, Cheh, and kwik, Bu is an ornamental hairpin used by the empress, and it is decorated with Boyo. Pyun is a wig made of braided hair. Chah is made of Bal which is put together by its lenath, and it was also called Picheh or Pisuck. It is made, one by one, of hair of the convicts and the low-class people. 초도 has a meaning of toupee, and it is used to look beautiful with its thick black hair. Kwik is a wig made of hair as if it is weaved out of thread, and it is rounded with a wire. In ancient times, it was also called chah, Pi, or Pi People wore different wigs according to their class and the use, in order of Bu, Pyun, and Chah. There are remains of the Han Dynasty. Boyo, just like the wig, was originally a custom of the northern nomadic tribes which had been introduced to the later Han Dynasty. It is also called Cho Song and has a different meaning from the Boyo attached to a crown before the Han Dynasty. It became much more beautiful in the Which in period. Boyo gained its popularity by the women in Tang Dynasty, which is due to the influence by the customs of the western Ho tribe. The name of hairstyling using wigs in each period, and things such as hair, black thread, lignum, and paper were used as materials. Since the wig had differed according to the disparity in social standing it was prohibited to the general public, but it became in style later on. Wig also becomes popular in central Asia and gained its properity in the Tang Dynasty which is greatly influenced by the western countries. It is said in the records that the kobal Style had been exceedingly in fashion from the Ju to the Chung Dynasty, and the remains of the Han and Song Dynasty were found. times, it was also called chah, Pr, or period, and things such as hair, black thread, lignum, and paper were used as materials. Since the wig had differed according to the disparity in social standing, it was prohibited to the general public, but it became in style later on. Wig also becomes popular in central Asia and gained its prosperity in the Tang Dynasty which is greatly influenced by the western countries. It is said in the records that the kobal Style had been exceedingly in fashion from the Ju to the Chung Dynasty, and the remains of the Han and Song Dynasty were found.

• Journal of Radiation Protection and Research
• /
• v.4 no.1
• /
• pp.14-20
• /
• 1979

For accurate and easily shielding irregular shaped organ, its minimized penumbra region and a low melting point alloy 'Lead Y' and synchronizing instrument have been developed. The 'Lead Y' is the quaternary eutectic alloy and it is composed of Lead 30.0% Tin 11.5% Bismuth 48 5% Cadmium 10.0% The density of its at $22^{\circ}C$ is $9.8g/cm^3$ and the melting temperature has $40^{\circ}C\;to\;68^{\circ}C$. The thickness of 'Lead Y' for perfect shielding of Co-60 gamma ray and LINAC 10MeV x-ray is 6cm and 7cm respectively. The 'Lead Y' shielding block is casted directly on the styrofoam from which is cut with hot wire of synchronizer device. The special features and advantages of the Lead Y shielding block could be summarized as follows; 1. The shielding block for radiotherapy is rapidly processed only with boiling water and styrofoam. 2. It is not injure one's health and not danger of a fire, because of not generating of any metals vapor and evil smelling. 3. It is very effective to minimize secondary penumbra for the protection of healthy tissue from unnecessary ionizing radiation regardless of the magnification source to skin distance. 4. The HVL of the Lead Y is 1.2cm for Co-60 gamma ray and it's shielding effect is almost same as the pure lead block. 5. The hardness of Lead Y is 1.5 times higher than lead block. 6. It's reavailability is higher than lead block and then one block of Lead Y is reavailable about 30 to 40 times. 7. It is usefull for shielding of x-ray, gamma ray, beta-ray, electron and neutron radiation. 8. The materials for Lead Y are easy to acquire with reasonable price and tractable.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.34-38
• /
• 2013

AC Losses for face to face stacks of four identical coated conductors (CCs) were numerically calculated using the H-formulation combined with the E-J power law and the Kim model. The motive sample was the face to face stack of four 2 mm-wide CC tapes with 2 ${\mu}m$ thick superconducting layer of which the critical current density, $J_c$, was $2.16{\times}10^6A/cm^2$ on IBAD-MgO template, which was suggested for the mitigation of ac loss as a round shaped wire by Korea Electrotechnology Research Institute. For the calculation the cross section of the stack was simply modeled as vertically aligned 4 rectangles of superconducting (SC) layers with $E=E_o(J(x,y,t)/J_c(B))^n$ in x-y plane where $E_o$ was $10^{-6}$ V/cm, $J_c$(B) was the field dependence of current density and n was 21. The field dependence of the critical current of the sample measured in four-probe method was employed for $J_c$(B) in the equation. The model was implemented in the finite element method program by commercial software. The ac loss properties for the stacks were compared with those of single 4 cm-wide SC layers with the same critical current density or the same critical current. The constraint for the simulation was imposed in two different ways that the total current of the stack obtained by integrating J(x,y,t) over the cross sections was the same as that of the applied transport current: one is that one fourth of the external current was enforced to flow through each SC. In this case, the ac loss values for the stacks were lower than those of single wide SC layer. This mitigation of the loss is attributed to the reduction of the normal component of the magnetic field near the SC layers due to the strong expulsion of the magnetic field by the enforced transport current. On the contrary, for the other case of no such enforcement, the ac loss values were greater than those of single 4cm-wide SC layer and. In this case, the phase difference of the current flowing through the inner and the outer SC layers of the stack was observed as the transport current was increased, which was a cause of the abrupt increase of ac loss for higher transport current.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.495-500
• /
• 2006

Satellite systems for objects positioning appeared indispensable for performing basic tasks of maritime navigation. Navigation, understood as safe and effective conducting a vehicle from one point to another, within a specific physical-geographical environment. [Kopacz, $Urba{\acute{n}}ski$, 1998]. However, the systems have not solved the problem of accessibility to reliable and highly accurate information about a position of an object, especially if surveyed toward on-shore navigational signs or in sea depth. And it's of considerable significance for many navigational tasks, carried out within the frameworks of special works performance and submarine navigation. In addition, positioning precisely the objects other than vessels, while executing hydrographical works, is not always possible with a use of any satellite system. Difficulties with GPS application show up also while positioning such off-lying dangers as wrecks, underwater and aquatic rocks also other naturaland artificial obstacles. It is caused by impossibility of surveyors approaching directly any such object while its positioning. Moreover, determination of vessels positions mutually (mutual geometrical relations) by teams carrying out one common tasks at sea, demands applying the navigational techniques other than the satellite ones. Vessels'staying precisely on specified positions is of special importance in, among the others, the cases as follows: - surveying vessels while carrying out bathymetric works, wire dragging; - special tasks watercraft in course of carrying out scientific research, sea bottom exploration etc. The problems are essential for maritime economy and the Country defence readiness. Resolving them requires applying not only the satellite navigation methods, but also the terrestrial ones. The condition for implementation of the geo-navigation methods is at present the methods development both: in aspects of their techniques and technologies as well as survey data evaluation. Now, the classical geo-navigation comprises procedures, which meet out-of-date accuracy standards. To enable meeting the present-day requirements, the methods should refer to well-recognised and still developed methods of contemporary geodesy. Moreover, in a time of computerization and automation of calculating, it is feasible to create also such software, which could be applied in the integrated navigational systems, allowing carrying out navigation, provided with combinatory systems as well as with the new positioning methods. Whereas, as regards data evaluation, there should be applied the most advanced achievements in that subject; first of all the newest, although theoretically well-recognised estimation methods, including estimation [Hampel et al. 1986; $Wi{\acute{s}}niewski$ 2005; Yang 1997; Yang et al. 1999]. Such approach to the problem consisting in positioning a vehicle in motion and solid objects under observation enables an opportunity of creating dynamic and interactive navigational structures. The main subject of the theoretical suggested in this paper is the Interactive Navigational Structure. In this paper, the Structure will stand for the existing navigational signs systems, any observed solid objects and also vehicles, carrying out navigation (submarines inclusive), which, owing to mutual dependencies, (geometrical and physical) allow to determine coordinates of this new Structure's elements and to correct the already known coordinates of other elements.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.39-51
• /
• 2019

This study was tested on Ratafia Champagne Trouillard 1947 of old fortified wine and analyzed differences from existing wines. Old fortified wine in Champagne, France and blanding is Pinot Noir, Chardonnay and Pinot Meunier. Alcohol level is 18% and test date is Feb. 15-21, 2019(six days of decanting period/15 p.m. on the last tasting day). Tester is composed of one FICB grand commander one KOV Finland commander. The wine opening was tested for two blades after wire removal and the decanting time was applied to the calculation formula of 2019(this year)-1947(vintage year)/12=6 days set in this study. Aroma smelled like cherries, fruits, soy sauce and licorice and bouquet was identified in five stages. The first stage was presented with the smell of pot, the second stage was light coffee, the third stage smell of fruit and flowers, the fourth stage smell of wild honey and the fifth stage smell of refined brandy. Then, the test was analyzed in seven stages. This study has the following implications: First, the new concept of old wine was applied to fortified wine. Specific computational formulas for the decanting period were derived. The decanting presented five steps of aromas and bouquet. Wine testing has been expanded from the previous five to seven levels. A new taste of Champagne old fortified wine was analyzed.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.13-25
• /
• 2012

Ground anchor method is one of the most popular reinforcing technology for slope in Korea. For the health monitoring of slope which is reinforced by permanent anchor for a long period, monitoring of the tension force of ground anchor is very important. However, since electromechanical sensors such as strain gauge and V/W type load cell are also subject to long-term risk as well as suffering from noise during long distance transmission and immunity to electromagnetic interference (EMI), optical FBG sensors embedded tendon was developed to measure strain of 7-wire strand by embedding FBG sensor into the center king cable of 7-wire strand. This FBG sensors embedded tendon has been successfully applied to measuring the short-term anchor force. But to adopt this tendon to long-term monitoring, temperature compensation of the FBG sensors embedded tendon should be done. In this paper, we described how to compensate the effect in compliance with the change of underground temperature during long-term tension force monitoring of ground anchors by using optical fiber sensors (FBG: Fiber Bragg Grating). The model test was carried out to determine the temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon. The determined temperature sensitivity coefficient ${\beta}^{\prime}=2.0{\times}10^{-5}/^{\circ}C$ was verified by comparing the ground temperatures predicted from the proposed sensor using ${\beta}^{\prime}$ with ground temperatures measured from ground thermometer. Finally, temperature compensations were carried out based on ${\beta}^{\prime}$ value and ground temperature measurement from KMA for the tension force monitoring results of tension type and compression type anchors, which had been installed more than 1 year before at the test site. Temperature compensated tension forces are compared with those measured from conventional load cell during the same measuring time. Test results show that determined temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon is valid and proposed temperature compensation method is also appropriate from the fact that the temperature compensated tension forces are not dependent on the change of ground temperature and are consistent with the tension forces measured from the conventional load cell.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1596-1604
• /
• 2004

Quality Function Deployment(QFD) is a product development tool which ensures that the voice of the customer needs is heard and translated into products. To develop a sensible brassiere for middle-aged women QFD was adopted. In this study the applicability and usefulness of QFD was examined through the engineering design process for a sensible brassiere for middle-aged women. The customer needs for the wear comfort of brassiere was made by one-on-one survey of 100 women who aged 30-40. The customer competitive assessment was generated by wearing tests of 10 commercial brassieres. The subjective assessment was conducted in the enviornmental chamber that was controlled at $28{\pm}1^{\circ}C,\;65{\pm}3\%RH.$ As a results, we developed twenty-one customer needs and corresponding HOWs for the wear comfort of brassiere. The Customer Competitive Assessment was generated by wearing tests of commercial brassiere. The subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap. Engineering design process, QFD was applicable to the development of technical and aesthetic brassieres.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.2
• /
• pp.11-36
• /
• 1982

Forty-nine plant species as additives to silkworm artificial diet and 5 species as cellulose sources for artificial diet were screened for their economic values as feed-resources for the silkworm. Feeding response to artificial diet was tested on 82 silkworm strains. The effect of rearing conditions on feeding response and enzyme activities in the silkworm was investigated. The results were summarized as follows. 1. Seven species out of 49, Vigna sinensis ENDL, Ipomoea vatatas Lamarck, Cyperus anuricus Var. Laxus, Alnus japonica Stendel, Trifolium repens L, Prunus serrulata Lindley. Var, Glycine max L increased feeding response, compared with the basic formula of artificial diet. 2. The economic values of Vigna sinensis ENDL, Ipomoea vatatas Lamarck, Cyperus anuricus Var. Laxus, Ainus japonica Stendel, Cassia tera L, Erigeron canedensis L as feed-resources for artificiale diet were recognized, through feeding experiment during the entire larval stage. 3. Mulberry cellulose showed the best results in rearing and cocoon characteristics. 4. The extent of feeding response varied according to strains and varieties. Varieties in japanese strains showed higher feeding response than those in chinese and european varieties, with considerable variations among a varieties in strains. 5. The begining of 4th instar seems to be a proper time to convert from mulberry to artificial diet, or artificial diet to mulberry, however the middle of 3rd instar seems acceptable. 6. The optimum temperature for artificial diet rearing is 30$^{\circ}C$ during the period of 1st-3rd instar and 28$^{\circ}C$ for 4th-5th instar. 7. Electrophoretic isozyme patterns of esterase and acid phosphatase on agarose gel, as affected by strain. rearing temperature and feed-resources, were observed as follow. (1) Isozyme patterns of mid-gut esterase varied, depending on instar. One or two more isozyme bands were observed in the larvae than feed on the mulberry fed for the artificial diet. (2) A strain, chinese-15 with a higher feeding response, had 1∼2 more bands than chinese-60 with a lower feeding response. (3) Five bands of mid-gut esterase in 3rd and 4th instar larvae reared at 28$^{\circ}C$. and 4 for 3rd instar and 6∼7 for 4th instar larvae at 35$^{\circ}C$ were observed. (4) No similar esterase bands could be found among mid-gut, blood and silkgland. There are five esterase bands in the midgut, one in blood and three in silkgland. (5) There was rather small digerence in acid phosphatase types of mid-gut and blood according to varieties and rearing temperature. No active band was shown in silkgland. In midgut, there was one acid phosphatase band at 3rd instar, two at 4th instar and three at 5th instar. In blood, one active band at 3rd or 4th instar and three bands at 5th inster wire detected.