• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.336-338
• /
• 2006

Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch and also conditions for sustaining locking are theoretically investigated. the operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.1-5
• /
• 2009

NiTiCu alloys can produce a large force per unit volume and operate with a simple mechanism. For this reasons, it has been widely studied for application as a micro actuator. So in this study, one-way and two way shape memory effects of Ti-42.5at%Ni-2.0at%Cu alloys are studied. In the case of one-way shape memory effects, shape memory recoverable stress and strain of this alloys were measured by means of tension and compression tests under constant temperature. The strains by tension and compression stress were perfectly recovered by heating at any testing conditions also shape memory recoverable stress increased to 116 MPa in tension tests and to 260 MPa in compression tests. In the case of two-way shape memory effects, transformation temperatures from thermal cycling under constant uniaxial applied tension and compression loads linearly increased by increasing external loads and their maximum recoverable strain is 3.8% at 100MPa tensile condition and 2.2% at 125 MPa compression condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.167.1-167.1
• /
• 2011

Sustainable energy generation is becoming extremely imperative due to the expected limitations in current energy resources and to reduce pollution. Especially, because of its considerable energy potential, ocean wave energy has been investigated with regard to power generation. To develop large high power wave generator system, it is important to make a small scale proto type and to test that. Thus the objective of this research is to examine the characteristics of a mechanically excited generator system having small power capacity experimentally. The water reservoir (4 m length, 1.5 m width and 1.8 m depth) having a wave maker to make arbitrary height and period of the water wave was made. The proto type consists of three main parts; a buoy, rack-pinion base one-way mechanism, and a wave generator(Fig.1). The water wave is going up and down and the hexahedron buoy is following the wave. The rack gear attached to the buoy is also going up and down to roll the pinion connected to an electric generator then it produces electricity. The experiments were performed with several conditions of water waves, and the power outputs over 30 W could be measured for some conditions. In future works, to achieve higher performance for the proto type, the effects of primary parameters (buoy shape and mass, etc.) on the system efficiency will be identified.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.4
• /
• pp.416-424
• /
• 2005

At present, the Korean electricity industry is undergoing restructuring and the Cost Based-generation Pool (CBP) market is being operated in preparation of a Two Way Bidding Pool (TWBP) market. In deregulated electricity industries, an integrated power market simulator is one of the tools that can be used by market participants and market operators analyzing market behaviors and studying market structures and market codes. In this regard, it is very important to develop an electricity market simulator that reflects market code providing a market operation mechanism. This paper presents the development of an integrated market simulator, called the Power Exchange Simulator (PEXSIM), which is designed to imitate the Korean electricity market considering the various features of the market operating mechanism such as uniform price and constrained on/off payment. The PEXSIM is developed in VB.NET and composed of five modules whose titles are M-SIM, P-SIM, O-SIM, T-SIM and G-SIM interfacing the Access database program. To verify the features and the performance of the PEXSIM, a small Two Way bidding market with a 12-bus system and a One Way bidding market for generator competition will be presented for the electricity market simulations using PEXSIM.

• Proceedings of the Korean Statistical Society Conference
• /
• 2005.11a
• /
• pp.59-65
• /
• 2005

We propose five Bayesian methods to estimate the cell expectation in an incomplete multi-way categorical table with nonignorable nonresponse mechanism. We study 3 Bayesian methods which were previously applied to one-way categorical tables. We extend them to multi-way tables and, in addition, develop 2 new Bayesian methods for multi-way categorical tables. These five methods are distinguished by different priors on the cell probabilities: two of them have the priors determined only by information of respondents; one has a constant prior; and the remaining two have priors reflecting the difference in the response mechanisms between respondent and non-respondent. We also compare the five Bayesian methods using a categorical data for a prospective study of pregnant women.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.499-505
• /
• 2005

In this paper, a new type of pi+ezoelectric stepping motor is designed, manufactured and tested. This motor is composed of piezoelectric torsional actuator and a pair of one-way clutch bearings. The torsional actuator consists of 16-polygonal tube of piezoceramic that can produce an angular displacement associated with shear mode. One-way clutch bearing converts oscillation of torsional actuator into a continuous stepping rotation. The proposed stepping motor does not require any conversion mechanism for stepping motion like any other motors. In the design process, the shear resonance mode of piezoelectric actuator is analyzed by using a commercial finite element analysis program, and the performance of the fabricated torsional actuator is measured. $0.124^{\circ}$ of maximum angular displacement is measured in square wave excitation on the actuator only. The stepping motor is manufactured by assembling a pair of one-way clutch bearings and the torsional actuator. The maximum rotation speed of 72rpm and the blocking torque of 3.136 mNm are measured at 3540 Hz and 100V/mm. Once the proposed piezoelectric stepping motor is miniaturized, it can be used for many compact and precise moving applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.969-978
• /
• 2006

Recently, there has been explosive growth in Internet service contents, and we have witnessed the emergence of many real-time applications on the Internet. These types of applications require special support from the underlying network such as reliability, timeless, and guaranteed delivery, as well as different levels of service quality. Estimation network status and transcoding data rate are researching for QoS of multimedia service by using the RTP/RTCP. We propose two schemes that the way to calculate the one-way delay by expanding the structure of RTP/RTCP in Internet that provides us 'best effort' service and to estimate the network condition by using this in this paper. And we propose the dynamic RTCP mechanism based on one-way delay to deal with rapidly changed network situation immediately. In simulation, proposed monitoring schemes using the one-way delay has similar in performance to monitoring schemes using the GPS, proposed dynamic RTCP scheme obtain the desired result of decreased packet loss rate by sending RTCP RR packet lower than other schemes.

• IE interfaces
• /
• v.11 no.3
• /
• pp.41-53
• /
• 1998

Several performance measurement systems have been proposed and are currently being used in many organizations. However, no performance measurement system has presented a mechanism for integrating all of the information of performance measures in a way that considers the relationships between them. This paper proposes the performance information integration method (PIIM) which synthesizes all useful information of performance measures with consideration of the relationships and generates a single, global, organizational performance score. The PIIM showed good performance in the implementation in one long-term care facility. This paper provides performance measurement systems with an integration mechanism for multiple performance measures.

• International Journal of Computer Science & Network Security
• /
• v.23 no.12
• /
• pp.81-90
• /
• 2023

Cloud computing is an emerging business model popularized during the last few years by the IT industry. Providing "Everything as a Service" has shifted many organizations to choose cloud-based services. However, some companies still fear shifting their data to the cloud due to issues related to the security and privacy. The paper suggests a novel Trust based Mutual Authentication Mechanism using Secret P-box based Mutual Authentication Mechanism (TbMAM-SPb) on the criticality of information. It uses a particular passcodes from one of the secret P-box to act as challenge to one party. The response is another passcode from other P-box. The mechanism is designed in a way that the response given by a party to a challenge is itself a new challenge for the other party. Access to data is provided after ensuring certain number of correct challenge-responses. The complexity can be dynamically updated on basis of criticality of the information and trust factor between the two parties. The communication is encrypted and time-stamped to avoid interceptions and reuse. Overall, it is good authentication mechanism without the use of expensive devices and participation of a trusted third party.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.70-75
• /
• 2008

This paper describes a tool-clamping/unclamping mechanism for application of a micro-spindle. The mechanism is based on one-way shape memory effect and interference-fit. The corresponding mathematical models and a few considerable design parameters are mentioned in this paper. Especially, necessary conditions for the clamping and unclamping operation are investigated through finite element analysis. The analysis results show that the differences between the diametral deformations of the tool holder in high temperature and that in low temperature are increased according to amounts of the interference. Thus the less interference between the tool-holder and the ring, the less tolerance to allow the clamping and unclamping operation because the inner diameter of the tool holder in high temperature should be smaller than the diameter of the tool shank, and that in low temperature should be larger than the diameter of the tool shank. In addition, the design for maximization of clamping force are investigated based on finite element analysis. The results show that the more amounts of the interference, the more clamping force. As the result, the interference should be considered as a important factor to maximize the tool clamping force.