• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.903-908
• /
• 2007

A retractor is the major component of a seatbelt system that restraints passengers by locking the movement of webbing. Recently, in order to increase the effectiveness of seatbelt systems, motorized retractors that remove slack and correct passenger posture just before airbag expansion when collision is predicted are widely used. Key component of motorized retractors is the one-way clutch that engages and disengages the winding action of webbing according to the direction of motor revolution. Analytical investigation of action of the one-way clutch mechanism has been carried out to figure out conditions for one-way locking, and to study the effect of various kinematic and dynamic design variables of one-way clutch. Using combination of ADAMS and LifeMOD soft-wares, dynamic simulation of operation of motorized retractors including Hybrid-III dummy model has been carried out to evaluate the performance of the motorized retractors in various crash scenarios.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.173-178
• /
• 1999

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.336-338
• /
• 2006

Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch and also conditions for sustaining locking are theoretically investigated. the operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.957-960
• /
• 2003

Many solar cell way need to be connected by series or parallel to extract the high power Especially, during parallel operation to reduce circulation current the individual converter has to share and control the load current. Generally, Current Sharing(CS) can be implemented using droop and active current sharing method. In this paper, one 3[KW] PWM converter was replaced as one 3[KW] solar cell array(3 parallels, each parallel has twenty single modules), two 3[KW] solar cell way Is Paralleled to generate 6[KW] power. Also each converter used voltage-current controller and Automatic MSCPM(Master-Slave Current-programming Method) for current sharing(AS).

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.831-835
• /
• 2005

In a signal control of the railway system, the first objective is to guarantee a safety of the train operation, and the second is to increase a frequency(a capability of the transportation) of the train operation. In order to express the capability of the transportation a terminology what is called a railroad line capacity is employed. The railroad line capacity means a maximum frequency of the train operation in a possible schedule of the one way operation for one day. During the last several years an improvement in the facilities of the train operation (railroad line extension, improvement in the stations, improvement in the signal facilities) has been achieved to increase the railroad line capacity. In this paper the authors deal with the case analysis which try to shorten headway and which has an impartible relation with increasing of the railroad capacity

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.55-61
• /
• 2006

Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch, and also conditions for sustaining locking are theoretically investigated. The operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1860-1871
• /
• 2011

Presently, The Regular Block System(Automatic, Interlocking block system) is usually used during the operation of block section. However, In case that the regular block system fails because of the failure of the fixed signals and block equipment or in case of the unexpected emergent situation which should drive on the single-track due to the accidents in the double-track section or the repair work of the one-track, the Substitute Block System to make use of the driving permission license(mapping ticket, mapping paper) is used. In case of the operation of the opposite line and the temporary one-track, the safety gets worse and the SBS may cause the fatal accidents such as a head-on & a rear-end collision. Also, the unmanned railroad stations has recently increased owing to the effective operation of the stations, for it is difficult to execute the SBS in their absence. As a result, the increase of the operation time made the train delayed. Being on the rise of these problems, in this study, we analyzed the problems and difficulties of the SBS on the single line which is lacking stability and safety and on the sections combined between maned and unmaned railroad stations. And we proposed the method to improve the existing drive permission license used for 50 years into the brand-new one with state-of-the art technology and scientific way. In the era of the 21th century, Carrying out the new SBS equipped with stability and safety, we will contribute to the effective operation of trains and the satisfaction of our customers in the future.

• Journal of National Security and Military Science
• /
• s.1
• /
• pp.35-70
• /
• 2003

President Lee, Syngman was ROK supreme commander at the Korean war. But, it is doubt that he executed his authority and responsibility by the ROK constitution and law. At the phase of the Korean War conduct, his role may be divided into 'military operation execution one' and 'political-diplomacy one'. He appointed unqualified person to the important position of the national defence, didn't make war execution system, and was not make to meet the war. And, after transferring the ROK force operation commanding authority to the Commander in Chief, UN Command, his role was extremely trivial at the military operation execution phase. Any way, he intended to recover the inferior national strength and military capacity with USA aid, and concentrated his effort toward diplomacy with USA. At last, he succeeded in making a mutual defence treaty and gained a big result to harden Korea national security after war. In sum, president Lee was shrewd politician and diplomat than military leader. And, it can be evaluated that he supplemented the lost part of military affairs side with diplomat one.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.633-637
• /
• 2007

Bimodal Tram is the newly developed vehicle for both the tracked way and the public road. Its operation system has some characteristics including BIS(bus information system)/BMS(bus management system) based on ITS(intelligent Transportation system) which is used presently in public transportation operation system. One of them is more accurate vehicle fleet control based on both magnetic maker position reference system and GPS(global positioning system) and the other is automatic vehicle control for emergency situations by the Bimodal Tram operation system which will be performed by the unified control and operation center. This paper has investigated the requirements and functional definitions necessary to construct the unified control and operation center for Bimodal Tram operation system which will be more efficient and secure public transportation system than the conventional ones.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.83.1-83.1
• /
• 2010

A Dead-end mode operation is one of the best way to maximize the gas usage rate. But, some components of fuel cell stack like gas diffusion layer(GDL) or membrane can be damaged in dead-end mode operation. In this study, a Large Scale Polymer electrolyte membrane fuel cell(PEMFC) for a dead-end operation has been developed. The stack is composed with 4 cells which has over 400cm2 of active area. Hydrogen is used as a fuel, and oxygen is used as a oxidant. The dead-end operation performance was evaluated by a long-term dead-end mode operation. The fuel cell stack is operated over 1,500 hours in dead-end mode operating fuel cell test station. And the performance change of the fuel cell stack was investigated.