• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.275-283
• /
• 2011

A local or site-specific water temperature is downscaled from the nation-wide air temperature that represents simulation by General Circulation Model (GCM). Both two-step and one-step method are tested and compared in three sites: Masan Bay, Lake Sihwa, and Nakdong River Estuary. Two-step method uses a linear regression model as the first step that converts nation-wide air temperature into local air temperature, and the corresponding coefficient of determination is in the range of 0.98~0.99. The second step that converts air temperature into water temperature uses a nonlinear curve, so called S-curve, and the corresponding root mean squared error (RMSE) is 2.07 for rising limb in Masan Bay, 1.93 for falling limb in Masan Bay, 2.59 for Lake Sihwa, and 1.58 for Nakdong River Estuary. In a similar way, one-step method is performed to directly convert nation-wade air temperature into local water temperature, and the corresponding RMSE is 2.28 for rising limb in Masan Bay, 1.89 for falling limb in Masan Bay, 2.55 for Lake Sihwa, and 1.52 for Nakdong River Estuary. Consequently both methods show a similar level of performance, and one-step method is recommendable in that it is simple and practical in relative terms.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.459-465
• /
• 1994

A-axis oriened YBCO thin flims were grown on $LaAIO_{3}$ single crystal substrate by off-axis rf magnetron sputtering method. We used two kinds of process to get a-axis oriented fi1ms;one-step process and two-step process. In one-step process, films are grown in single step in which substrate temperature( $T_s$) is in the range of $590^{\circ}C$ to $680^{\circ}C$. On the other hand, in two step process a-axis oriented thin film templates i f about 30nm thickness is deposited at low temperature first, and subsequently films are grown at elevated temperature to the final thickness of about 100nm. In the case of one step process($T_s$ ~)$600^{\circ}C$), prefered a-axis orientation is dominant and Cu-rich phases segregate at the surface. Segregations decrease and ($00 \ell$) peaks increase upon increasing $T_s$. The films prepared by two step method appeared to have strong(h00) peaks as the deposition rate increased. Microstructure shows pin holes resulted from mixed phases of a-axis and c-axis oriented films. In both cases of one step and two step process, as TS decreases, prepared films show stronger a-axis orientation. However electrical properties of the films are depressed with lower $T_c$ and wider $\Delta T$ as $T_s$ decreases.

• BMB Reports
• /
• v.34 no.1
• /
• pp.47-50
• /
• 2001

A one-step, two-site enzyme immunoassay was developed for measuring human alpha-fetoprotein (AFP) in serum and amniotic fluid using monoclonal antibodies (McAb) by eliminating the high-dose hook effect. Three McAbs that recognize different epitopes were selected among 16 different clones on the basis of epitope mapping, two for immobilization and one for horseradish peroxidase conjugation. This one-step immunoassay system is more convenient and rapid compared to a conventional two-step sandwich immunoassay system. It did not exhibit the hook effect to around 2.7 mg/ml of AFP, which is probably one of the highest concentrations of AFP in the serum. The dose-response curve of the system was linear to 500 mg/ml of AFP and the system could differentiate as low as 1 mg/ml of AFP The intra- and inter-assay variations were in an acceptable range; 95~104% and 97~105% respectively Its correlation with other commercial systems was around 95%.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2010

The objective of this study was to determine the effects of "Green-one" organic nutrient on mycelial growth and fruiting of P. ostreatus. The dilution concentrations of "Green-one" was treated as follows. There was control, 100, 200, 400 concentrations. That treatments were treated with step of each mycelial growth step. The best of growth steps was mycelial scratching step. At that time, DPI(Day required for primordial formation after inoculation) was shortened for 1 day. Valid germination stipe are 15 pieces, 3 pieces more than control. Stipe length and stipe diameter was long each 4mm, 3mm more than control. Pileus size is shortened than control. Yields per one bottle(g/850cc) was 146g increased 6.5% than control 137g/850cc.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.73-73
• /
• 2001

This study was to examine whether the vitrified, one-step diluted and direct transferred Hanwoo IVM/IVF/IVC blastocysts can be successfully survived in vivo and they were succeeded into the live birth. For vitrification, blastocysts were serially exposed in glycerol (G) or/and ethylene glycol (EG) mixtures [10% (v/v) G for 5 min, 10% G plus 20% EG (v/v) for 5 min, and 25% G plus 25% EG (v/v) for 30 sect] which is diluted in 10% FBS added D-PBS. Thawing of straw was carried out in air for 10 sec and then in water bath of $25^{\circ}C$ for 20 sec. One-step dilution within the straw was done in water bath of $25^{\circ}C$ for 1 min. Vitrified and one-step diluted embryos were directly transferred into 36 (natural or hormone induced synchronized) recipient cows in 6 areas of Kyungsang Buk-Do. Pregnancies were confirmed at first when recipient cows did not return to the subsequent estrus cycle, and later by manual palpation per rectum on day 45, 90 and then living calves were derived into parturition. Overall pregnancy was 33.3%(12/36), However, higher pregnancy was obtained when the recipients exhibited estrus one day earlier than the age of transferred embryos (53.3 vs 25.0-27.3%), irrespective of synchronization methods. Also, parous recipients became pregnant higher than nulliparous heifers, And, there were not different in pregnancy rates by the aspect of corpus luteum (CL) quality of recipients (good, 29.4; fair, 37.5; poor, 33.3%). One hundred eight of frozen-thawed Hanwoo blastocysts were directly transferred into 36 recipient cows. In 12 of pregnant cows, 3 cows were aborted and 9 cows were calved [single, 66.7% (6/9): twin, 33.3% (3/9)]. Total embryo implantation rate was 11.1% (12/108). However, 9 Hanwoo calves were lived. Therefore, these results demonstrate that direct transfer technique of vitrified and one-step diluted bovine blastocysts can be applied easily and effectively with the higher pregnancy rate on field trial without the equipment and embryological skills.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.4
• /
• pp.267-275
• /
• 2011

This paper proposes a new quickly convergent pattern search quasi-Newton algorithm that employs the multi-step version of the Symmetric Rank One (SRI). The new algorithm works on the factorizations of the inverse Hessian approximations to make available a sequence of convergent positive bases required by the pattern search process. The algorithm, in principle, resembles that developed in [1] with multi-step methods dominating the dervation and with numerical improvements incurred, as shown by the numerical results presented herein.

• Proceedings of the Korean Statistical Society Conference
• /
• 2003.05a
• /
• pp.269-273
• /
• 2003

We consider an efficient parametric estimation method of spatial dependence in weak stationary processes. Spatial dependence is modeled through variogram and correlogram. Most of parametric estimation methods of correlogram use two step method; nonparametric estimation and parametric integration. We bind these two steps into one step by using GEE method instead of least squares type optimization. Our one step method is more efficient statistically and gives a clear interpretation of related concepts used in traditional two step methods.

• Journal of applied mathematics & informatics
• /
• v.5 no.3
• /
• pp.669-690
• /
• 1998

In this paper we develop a new theory of adjoint and symmetric method in the class of general implicit one-step fixed-stepsize methods. These methods arise from simple and natral def-initions of the concepts of symmetry and adjointness that provide a fruitful basis for analysis. We prove a number of theorems for meth-ods having these properties and show in particular that only the symmetric methods possess a quadratic asymptotic expansion of the global error. In addition we give a very simple test to identify the symmetric methods in practice.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.268-269
• /
• 2014

나노입자 담지 탄소소재는 촉매재료로써 다양하게 응용되고 있으며, 이들 재료의 공정수를 획기적으로 줄이고자 솔루션 플라즈마라는 새로운 공정을 이용하여 One-Step으로 합성하는데 성공하였다. 합성된 재료의 경우 1~3nm의 미세한 나노입자가 탄소소재위에 균일하게 분산되어 있는 것을 확인 할 수 있었고, 촉매 활성 역시 매우 뛰어남을 확인 할 수 있었다.