• Journal of Chest Surgery
• /
• 제32권6호
• /
• pp.595-598
• /
• 1999

원위부 대동맥궁류가 과도하게 커서 elephant trunk 술식을 적용하기 어려운 경우나 하행 대동맥류가 파열된 경우와 같은 합병증이 동반된, 전 흉부 대동맥을 침범하는 광범위 대동맥류에 있어서는 단계적 수술이 불가능하다. 저자들은 상행 대동맥에서부터 하행 대동맥까지의 대동맥을 동시에 치환하는 수술을 성공적으로 시행하였다. 환자는 65세 남자로서 하행 대동맥류의 파열을 동반한 전 흉부 대동맥류를 갖고 있었다. 수술은 횡행 개흉 흉골 절개술을 통하여 접근하여 초 저체온 완전 체외순환 정지 및 역행성 뇌관류하에 시행하였다. 환자는 순조롭게 회복하였으며 신경학적 합병증 없이 퇴원하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.893-898
• /
• 2009

The quantity of discharged oil from a compressor is one of the most important issues for proper operation of refrigeration system. If the oil is increased in the system not only pressure drop is increased in other components, such as evaporator and gas cooler but also heat transfer coefficient in the heat exchangers is decreased. In addition, the lack of oil in the compressor may cause a critical of the system failure. In this study, one stage single rotary compressor is used for measuring oil circulation ratio(OCR). Carbon dioxide and PAG oil are used as refrigerant and lubricant. Using a U-tube densimeter, mixture density is measured. Characteristics of oil circulation ratio have been investigated for $CO_2$ rotary compressor in the range of operation frequency 45 Hz to 63 Hz and the suction temperature range of $0^{\circ}C$ to $15^{\circ}C$. The results obtained indicate that the oil circulation ratio is increased as the suction temperature or compressor operating frequency is increased.

• Archives of Reconstructive Microsurgery
• /
• 제25권1호
• /
• pp.1-6
• /
• 2016

Purpose: The external ear is a common area of trauma on the body prone to exposure of ultraviolet light, which can lead to skin cancer. Thus, variable techniques have been developed and used for reconstruction of the external ear. The aim of this study is to review the surgical method, its area of application, as well as advantages and pitfalls of reconstruction of the external ear with inferior based retroauricular flaps. Materials and Methods: Eight patients underwent external ear reconstruction with inferior based retroauricular flap for external ear defects in our institute from September 2012 to June 2015. According to the area of the defect, patients were classified as middle 1/3 (n=4), inferior 1/3 (n=2), superior auroculo-cephalic sulcus (n=1), and external auditory canal (n=1). Results: All of the flaps survived the operation and there was no marginal necrosis. Mean size of the defect was $2.8{\times}1.8cm$ and mean size of the retroauricular flap was $5{\times}2cm$. For insetting of the flap, a subcutaneous tunneling technique was used in 6 cases and rotation without subcutaneous tunneling was used in 2 cases. Transient paresthesia occurred in 3 cases. Two cases recovered within 3 months but one case did not recover until 6 months. Conclusion: The inferior based retroauricular flap is an available technique in external ear reconstruction with one stage operation.

• 한국BIM학회 논문집
• /
• 제14권1호
• /
• pp.30-38
• /
• 2024

This study aims to propose a smart city governance logic model that can accommodate more diverse information service systems by mixing hub-and-spoke and blockchain technologies as a data management model. Specifically, the research focuses on deriving the logic of an operating system that can work across smart city planning based on the two data governance technologies. The first step of the logic is the generation and collection of information, which is first divided into information that requires information protection and information that can be shared with the public, and the information that requires privacy is blockchainized, and the shared information is integrated and aggregated in a data hub. The next step is the processing and use of the information, which can actively use the blockchain technology, but for the information that can be shared other than the protected information, the governance logic is built in parallel with the hub-and-spoke type. Next is the logic of the distribution stage, where the key is to establish a service contact point between service providers and beneficiaries. Also, This study proposes the establishment of a one-to-one data exchange relationship between information providers, information consumers, and information processors. Finally, in order to expand and promote citizen participation opportunities through a reasonable compensation system in the operation of smart cities, we developed virtual currency as a local currency and designed an open operation logic of local virtual currency that can operate in the compensation dimension of information.

• Journal of International Society for Simulation Surgery
• /
• 제2권1호
• /
• pp.1-6
• /
• 2015

Purpose Bisphophonate-related osteonecrosis of the jaw (BRONJ) is an emerging problem. Extensive osteonecrosis of the jaw needs free flap reconstruction. Free fibular flap is the most useful flap for maxilla-mandibular hard and soft tissue reconstruction. The advantages of fibular free flap are simultaneous soft and hard tissue reconstruction and placing implant in reconstructed mandible and maxilla. In this study, four consecutive BRONJ patients who underwent fibula free flap reconstruction using simulation surgery were reviewed. Materials and Methods Four BRONJ patients who underwent free fibula reconstruction between May 2006 and September 2014 were included in this study. Male to female ratio was 1:3 and average age was 67.3 years old (62-70). All patients need mandibular bone reconstruction. Three patients suffered from osteoporosis and one male patient had multiple myeloma. Postoperative flap survival, functional reconstruction, esthetic results, food taking were evaluated. Results Three osseous flaps and one osteocutaneous flap were used. All the fibular flaps were survived and patients were recovered without complications. Oro-cutaneous fistula was resolved after operation. All patients were satisfied with the esthetic results. Patients reported improved solid food intake after operation with partial denture. One fully edentulous patient had semi-fluid diet after operation. Conclusion Treatment of the BRONJ is difficult due to lack of standard protocol. Fibular free flap using simulation surgery is the workhorse flap for mandibular hard and soft tissue reconstruction, especially in stage III BRONJ patient. In this study, functional and esthetic results were successful in all patients. Normal diet was possible with partial dentures.

• 항공우주기술
• /
• 제13권1호
• /
• pp.44-54
• /
• 2014

본 논문에서는 3구 추력기 2모듈 형태의 추력기시스템 기준으로 발사체 상단 자세제어용 추력기시스템 명령생성방식 2가지를 제시한다. 하나는 혼합오차함수를 이용하는 방식이고, 다른 하나는 명령혼합함수를 이용하는 방식이다. 시뮬레이션을 통해 두 방식을 비교 분석한 결과, 제어축 간의 상호 간섭, 각축 제어기의 독립적인 설계와 분석 용이성, 비행성능 예측 가능성 등의 관점에서 명령혼합 알고리듬이 상대적으로 유리함을 보인다.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.43-49
• /
• 2016

A performance analysis of a gasoline engine with a 2-stage turbocharger system for unmanned aerial vehicle(UAV) was conducted. One dimensional system analysis was conducted for the requirements of turbochargers and adequate turbochargers were selected from commercially available models for automobiles. Modeling and simulation were performed by Ricardo WAVE. Gasoline engine modeling was based on a 2.4 L 4-cylinder engine specification. The selected turbochargers and intercoolers were added to the engine model and simulated at 40,000 ft altitude condition. The results of the engine model and 2-stage turbocharger system model simulation showed break power 93 kW which is appropriate power required for the engine operation at the ambient conditions of 40,000 ft altitude.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1596-1600
• /
• 2000

We propose a novel adaptive feed forward controller (AFC) design method for rejecting the effect of micro actuator resonance in the design of dual-stage actuator servo systems for disk drives. Microactuator's resonance is one of important issues in dual-stage actuator servo, which varies up to ${\pm}10%$ per product and even during operation. We derive an adaptive algorithm for the proposed AFC design, which turns out to be identical to the delayed-x LMS algorithm which is a special form of the filtered-x LMS algorithm. In the algorithm, coefficients of the AFC are adapted by the residuals of constrained structure defined in such a way that the coefficients become time invariant. Contrary to the conventional AFC, it considers the phase delay of closed-loop transfer function at resonance frequency for system stability. We also apply an adaptive algorithm with frequency tracking capability. The frequency tracking algorithm is induced by the orthogonality of AFC coefficients. Computer simulations are carried out to demonstrate effect of the proposed AFCs.

• 농촌지도와개발
• /
• 제13권2호
• /
• pp.235-249
• /
• 2006

The objective of this study was to investigate the developmental level of Rural Women Leaders Federation(RWLF) which is one of the major rural women`s association in Korea. The writers designed organization measurement tool based on the reviews on the related studies and gather data from 191 memberships of RWLF through the mail questionnaire and interviews. The major findings were as follows; First, the findings shows us this organization as transition period from identification stage to expanded growth stage in developmental stage of rural women's organizations. Second, this organization focus on share of members decision making and leadership style rather than organization`s vision, strategy or organization level. In other words, this organization focus on human relations aspect rather than internal aspect of organization system. Third, this organization has high level of social evaluation of the organization, even if it has low level of personal compensation or individua's social performance. In conclusion, as long-term view-point, it is needed to help them to promote their self-control of survival ability to improve organization's vision, strategy, differentiation for achieving organizational goals. And it also needed to prepare educational programs to increase Rural Women's leadership capability understanding of organizational characteristics and its operation abilities.

• 소성∙가공
• /
• 제19권4호
• /
• pp.253-262
• /
• 2010

For multi-stage deep drawing process including ironing operation and biaxial forming in this study, tool developments are achieved, and the developed tool sets are applied to experimental investigations. In process and tool designs, a contact condition between intermediate blank and lower die is considered as the sequential one. In this study, the material used is cold-rolled thin sheet (SPCE) with the initial thickness of 0.4mm. From the experimental approaches, several failures such as tearing, localized thickening and thinning, are observed. To solve these failures, the contact surface on the lower die is modified. As the experimental results by applying the modified lower die, it is investigated that the failures are not occurred, and the excessive deformation behavior due to the thinning and thickening effects are decreased. Furthermore, the thickness distributions on the major axis and the minor axis of each intermediate blank are investigated to be already satisfied the target (ironing) thickness, respectively. By this systematic approach, it is confirmed that the experimental results show good agreements with the designed and required configuration of each deformed and final products.