• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.461-466
• /
• 1999

A CMOS op amp with rail-to-rail input and output ranges is designed in a one-volt supply. The output stage of the op amp is used in a common source amplifier that operates in sub-threshold region to design a low voltage op amp with rail-to-tail output range. To drive heavy resistor and capacitor loads with rail-to-rail output ranges, a common source amplifier which has a low output resistance is utilized. A bulk-driven differential pair and a bulk-driven folded cascode amplifier are used in the designed op amp to increase input range and achieve 1 V operation. Post layout simulation results show that low frequency gain is about 58 ㏈ and gain bandwidth I MHz. The designed op amp has been fabricated in a 0.8${\mu}{\textrm}{m}$ standard CMOS process. The measured results show that this op amp provides rail-to-rail output range, 56㏈ dc gain with 1 MΩ load and has 0.4 MHz gain-bandwidth with 130 ㎊ and 1 kΩ loads.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.820-822
• /
• 2005

본 논문에서는 16비트 혹은 32비트 고정 소수점 연산을 지원하는 디지털 신호처리 기능을 강화한 명령어 축소형 마이크로프로세서를 설계하였다. 설계한 마이크로프로세서는 명령어 축소형 마이크로 아키텍쳐의 표준에 따라서 범용 마이크로프로세서의 기능과 디지털 신호처리 프로세서의 기능을 함께 갖추고 있다. 산술연산기능 유닛, 디지털 신호처리 유닛, 메모리 제어 유닛으로 구성되어 있으며, 이 연산 유닛들이 병렬적으로 수행되어 디지털 신호처리 명령이나 로드/스토어 명령어의 지연된 시간을 보상할 수 있게 설계되었다. 이 연산유닛들을 병렬적으로 동작하게 함으로써 5단계 파이프라인의 구조로 고성능 마이크로프로세서를 구현하였다.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.70-78
• /
• 2010

Elitist nondominated sorting genetic algorithm (NSGA-II) is adopted and improved for multiobjective optimal reactive power flow (ORPF) problem. Multiobjective ORPF, formulated as a multiobjective mixed integer nonlinear optimization problem, minimizes real power loss and improves voltage profile of power grid by determining reactive power control variables. NSGA-II-based ORPF is tested on standard IEEE 30-bus test system and compared with four other state-of-the-art multiobjective evolutionary algorithms (MOEAs). Pareto front and outer solutions achieved by the five MOEAs are analyzed and compared. NSGA-II obtains the best control strategy for ORPF, but it suffers from the lower convergence speed at the early stage of the optimization. Several problem-specific local search strategies (LSSs) are incorporated into NSGA-II to promote algorithm's exploiting capability and then to speed up its convergence. This enhanced version of NSGA-II (ENSGA) is examined on IEEE 30 system. Experimental results show that the use of LSSs clearly improved the performance of NSGA-II. ENSGA shows the best search efficiency and is proved to be one of the efficient potential candidates in solving reactive power optimization in the real-time operation systems.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.493-496
• /
• 2010

본 논문에서는 32비트 명령어축약 형 마이크로프로세서를 적용하는 지문인식시스템에서 알고리즘 처리시간의 40%를 점유하는 세선화 단계를 위한 효율적인 하드웨어 구조를 제안하였다. 세선화는 특정 사이즈의 윈도우 마스크를 적용하여 같은 연산을 반복적으로 처리하는 점에 착안하여 이를 소규모의 하드웨어에서 처리함으로써 고성능 마이크로프로세서의 연산부담을 덜고 처리속도 향상을 얻을 수 있다. 본 연구에서는 HDL을 이용하여 RTL 수준으로 설계한 뒤 시뮬레이션 결과와 기존의 알고리즘 처리결과를 비교하였다.

• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2861-2873
• /
• 1997

부동 소수점 연산기는 고성능 컴퓨터에서 필수적이며, 최근 대부분의 고성능의 컴퓨터에서는 고성능의 부동 소수점 연산기가 내장되고 있는 추세이다. 부동 소수점 연산이 고속화 되면서 부동 소수점 연산기에서 한개의 단계를 차지하는 반올림 단계가 전체 부동 소수점 연산에 큰 영향을 미친다. 반올림 단계에서는 별도의 고속 가산기를 필요로하여 많은 처리 시간과 칩 면적을 차지하기 때문이다. 본 연구는 고성능 부동 소수점 연산기의 근 간을 이루는 부동 소수점 덧셈／뺄셈기, 곱셈기, 나눗셈기의 처리 알고리즘을 살펴보고, 이를 분석하여 새로운 반올림 처리 알고리즘을 갖는 연산기를 제안하였다. 제안된 부동 소수점 연산기들은 반올림 처리를 위한 별도의 시간을 요하지 않고, 반올림단계를 위한 가산기나 증가기를 필요로 하지 않는다. 따라서, 제안하는 부동 소수점 연산기들은 성능면이나 차지 면적 면에서 모두 효율적이다．

• Archives of Plastic Surgery
• /
• 제37권6호
• /
• pp.775-778
• /
• 2010

Purpose: Reconstruction of soft tissue defects with osteomyelitis in the lower third of the leg represents a challenge to plastic surgeons. Moreover, it is more arduous in multimorbid patients. One excellent option for reconstruction of these defects is to use a delayed distally based sural flap. Methods: We successfully used delayed distally based sural flap with a two-step procedure. During the first operation, radical debridement and elevation of flap were performed. The raised flap was fixed again at the donor site. The delay period ranged from seven to ten days. Between August 2008 and July 2009, we underwent operations for five patients using this technique. The size of flap varied from $10{\times}6\;cm$ to $12{\times}14\;cm$. Results: All flaps successfully survived. Partial skin loss of the grafted site was seen in two patients but no further surgical procedure was required for wound healing. Complaints of hypoesthesia on the lateral part of the foot was observed. In a three month follow-up period, hypoesthesia was resolved spontaneously. Conclusion: Delayed procedure improves the viability of distally based sural flap in high risk, critically multimorbid patients. We recommend that, if a two-stage operative approach is required, the delayed procedure should be considered.

• Journal of Korean Neurosurgical Society
• /
• 제30권sup1호
• /
• pp.140-143
• /
• 2001

We report a case of huge trigeminal schwannoma in a 10-year-old boy with neurofibromatosis type II, extending into the three spaces of the left middle, posterior, and infratemporal fossa. Initially we thought the child had a solitary trigeminal schwannoma, and most of the mass was resected successfully through one-stage operation, cranio-orbito-zygomatic intradural approach. However during the follow-up of the patient we found radiographically other multiple intracranial tumors of bilateral acoustic schwannomas, right trigeminal schwannoma, and foramen magnum tumor. Eventually the patient was diagnosed as neurofibromatosis type II presenting multiple intracranial tumors. We think childhood trigeminal schwannoma, even though in the case of solitary tumor, should be considered as possible initial manifestation of neurofibromatosis type II and that careful follow-up for the possibility of occurrence of other brain tumors such as schwannomas or meningiomas is necessary.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.109-115
• /
• 2011

The ice tank is important facility to check the performance of the ship and offshore in ice condition before the construction. MOERI(Maritime & Ocean Engineering Research Institute) constructed ice model basin on the end of 2010. The ice technology to know the phenomena of ice near the ship and to estimate power of the ship in model scale is the main characteristic of the ice model basin. To achieve this goal in one ice sheet, making of test plan and feasibility check of test possibility have to review in the beginning stage of the every test. This paper describes the number of maximum resistance and self propulsion test in a sheet of level ice and proposes the methodology to optimize pack ice, rubble ice, brash ice and ice ridge test in MOERI ice tank. The feasibility of free running test to know maneuvering performance in ice field and some specific idea to measuring ice thickness and ice ridge shape was proposed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.674-677
• /
• 2009

통신산업에서 유선시장에서 최대 이슈는 차세대 망 구축에 관한 사항이다. 현재까지 동선기반의 전국 가입자망은 단독사업자가 독점하여 제공되어 왔으나 차세대 망은 이동망과 같이 초기 망투자 단계에서부터 다수의 경쟁사업자가 참여하여 시장에서 자율적인 경쟁에 의해 발전할 수 있도록 각 국의 정부당국들은 설비 개방제도를 재정비하였다. 특히 차세대망 구축을 위한 광케이블의 초기 설치의 장애요인이자 주요 비용 요인은 토목공사 비용으로 지배적 사업자의 관로 개방을 의무화하고 있다. 관로 개방제도의 실효성을 높이기 위해서는 관련 설비에 대한 정보 제공이 필요하며 지배적사업자의 고유 정보에 대한 개방 수준 및 적정 대가를 마련해야 한다. 본 연구에서는 설비 개방제도를 채택하고 있는 국가를 조사하여 차세대망 투자 촉진을 위한 정보 개방 수준 및 대가 등 설비개방 정보 제공에 관한 기준을 제시하고자 한다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2047-2052
• /
• 2023

Risk-informed approach has been widely applied in the safety design, regulation, and operation of nuclear reactors. It has been commonly accepted that risk-informed design optimization should be used in the innovative reactor designs to make nuclear system highly safe and reliable. In spite of the risk-informed approach has been used in some advanced nuclear reactors designs, such as Westinghouse IRIS, Gen-IV sodium fast reactors and lead-based fast reactors, the process of risk-informed design of nuclear reactors is hardly to carry out when passive system reliability should be integrated in the framework. A practical method for new passive safety reactors based on probabilistic safety assessment (PSA) and passive system reliability analyze linking is proposed in this paper. New three-dimension frequency-consequence curve based on risk concept with three variables is used in this method. The proposed method has been applied to the determination optimization of design options selection in a 10 MWth lead-based research reactor(LR) to obtain one optimized system design in conceptual design stage, using the integrated reliability and probabilistic safety assessment program RiskA, and the computation resources and time consumption in this process was demonstrated reasonable and acceptable.