• 물과 미래
• /
• 제19권2호
• /
• pp.149-156
• /
• 1986

저수용량을 결정하기 위한 Rippl의 누가곡선법은 과거의 유량자료가 미래에 동일한 기록으로 반복되리라는 가정하에 오랫동안 사용되어 왔다. 본 연구의 목적은 추계학적 이론에 의한 저수용량을 결정하는 더 좋은 방법을 찾아내는데 있다. 그러므로 본 논문에서는 3개의 다목적 댐과 3개의 단일목적댐에 대한 하천의 월 유량을 Tomas-Fiering 법으로 모의발생하였으며 모의발생된 월 유량은 Range 개념으로 해석하였다. 또한 물의 이용을 최대화하는 저수지의 최적운영 법칙을 이용함으로서 저수지로 부터의 유출량을 결정하고 월 유량의 Range와 평균 유입량을 적절하게 고려함으로서 필요한 저수용량은 추계학적으로 결정하였다. 그러므로 본 연구에서 얻어진 결과는 기본설계 단계에서 제한된 자료, 즉 저수지의 운영기간과 월 평균유량을 가지고 필요한 저수지의 용량을 근사적으로 구할 수 있다.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1277-1295
• /
• 2019

With its technical development, digital printing is being universally introduced to the mass production of clothing factories. At the same time, many fashion platforms have been made for customers' participation using digital printing, and a tool is provided in platforms for customers to make designs. However, there is no sufficient solution in the production stage for automatically converting a customer's design into a file before printing other than designating a square area for the pattern designed by the customer. That is, if 30 different designs come in from customers for one shirt, designers have to do the work of reproducing the design on the clothing pattern in the same location and in the same angle, and this work requires a great deal of manpower. Therefore, it is necessary to develop a technology which can let the customer make the design and, at the same time, reflect it in the clothing pattern. This is defined in relation to the existing clothing pattern with digital printing. This study yields a clothing pattern for digital printing which reflects a customer's design in real time by matching the diagram area where a customer designs on a given clothing model and the area where a standard pattern reflects the customer's actual design information. Designers can substitute the complex mapping operation of programmers with a simple area-matching operation. As there is no limit to clothing designs, the variousfashion design creations of designers and the diverse customizing demands of customers can be satisfied at low cost with high efficiency. This is not restricted to T-shirts or eco-bags but can be applied to all woven wear, including men's, women's, and children's clothing, except knitwear.

• 에너지공학
• /
• 제24권1호
• /
• pp.17-23
• /
• 2015

전기식 출입문 시스템은 철도차량 영업운전에 영향을 주는 가장 중요한 시스템 중의 하나이다. 도시철도차량의 출입문은 승객들의 승하차를 담당하는 장치로써 고장이 발생할 경우 승객의 안전과 직접적인 영향을 미치기 때문에 열차운행에 영향을 미치는 중요한 장치이다. 최근에는 전기식 출입문 시스템의 신뢰도 목표값을 철도운영자가 철도차량 설계와 제작을 위한 발주사양 기술 요구조건에 포함하는 경향이 있으며, 차량 제작자는 제작시 발주사양기술 요구조건에서 철도운영자가 제시한 전기식 출입문 시스템의 신뢰도 목표값을 만족시켜야 하고, 철도운영자는 유지보수 데이터를 기반으로 공급자의 신뢰도 목표값 달성여부를 확인하고 승인하여야 한다. 본 연구에서는 전기식 출입문 시스템의 유지보수 현장 데이터를 수집하여 신뢰도를 미니탭 통계프로그램으로 분석하였다. 현장 데이터를 적용한 신뢰도 분석은 철도차량에 대한 새로운 유지보수 정책이나 유지보수 주기를 바꾸는데 매우 유용할 것이다.

• 농촌계획
• /
• 제25권2호
• /
• pp.99-117
• /
• 2019

Environmental impact assessment (EIA), which predicts, evaluates, and manages the influences on natural landscape, plays a role of monitoring natural resources for systematic management of natural landscape. However, the function of verification and correction of the system is still insufficient and feed-back, one of the most important features of EIA follow-up, has not been introduced in Korea's EIA system yet. As a procedure, it is required to check if the opinions of the evaluators are properly reflected to the outcomes of the project through a reviewing process after assessing environmental impacts of a development project. In reality, despite the awareness about the importance of follow-up inspection of the conformity with, the system mainly focuses on the agreement during the planning stage of the development project and fails to continuously manage after its completion. There have been various preceding studies related to prediction, evaluation, and management of environmental impacts on natural landscape for better management. They primarily dealt with the problems in the EIA process and suggested improvement measures, including directions for institutional development, step-by-step goals, and operation methods, to address the problems which arise in the EIA follow-up process. However, suggested measures are not actively applied with the focus only put on institutional operation, there are virtually no standardized methods to predict and assess landscape changes due to the development project and to manage landscape after the project. Against this backdrop, this study aims to explore the existing methods to analyze the impacts natural landscape and to establish a system where landscape management is continued after the development project. To this end, we will suggest reducing methods according to the predicted changes in landscape for post-project management of natural landscape. Characteristics of reduction methods by project type were examined through reviewing the guide to natural landscape rating and the importance of development project impacts on natural landscape by type of reduction was evaluated through questionnaire for experts. Evaluated types of reduction are classified and presented by characteristics of each development project and content of reduction type.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.290-297
• /
• 2017

압축강도 160MPa와 길이 15.4m를 가진 분절형 U거더와 합성 U거더의 휨거동 실험을 수행하였다. 실험 변수로는 강섬유 혼입률과 U거더 상부의 슬래브이다. U거더의 복부와 하부플랜지에 종방향 철근을 배근하였다. 상부플랜지에 2개의 15.2mm 강연선을 포함한 2개의 프리스트레싱 텐던 그리고 하부플랜지에 7개의 15.2mm 강연선을 포함한 2개의 프리스트레싱 텐던이 배치되고 U거더 접합 시 한차례 긴장 작업을 하였다. 초고강도 콘크리트 강도로 인해 U거더에 도입한 충분히 강한 프리스트레싱 긴장력은 U거더 시공단계에서 자중과 고정하중을 부담할 수 있다. U거더의 취성적 거동에 비해 합성 U거더는 안정적이고 연성적인 하중처짐 관계를 보여주고 있다. U거더 상부에 슬래브를 시공한 후, U거더 접합 시 도입했던 프리스트레싱 긴장력에 의한 합성 U거더의 휨하중 내하력은 마지막 하중 단계에서 설계하중을 부담할 수 있다. 초고강도 콘크리트로 인한 간단한 프리스트레싱 방법은 시공단계와 공사비 면에서 장점을 가지고 있다. 간격이 작은 전단키는 초고강도 콘크리트 U거더와 고강도 콘크리트슬래브간의 완전한 합성관계를 가져와 파괴하중 직전까지 슬립현상이나, 벌어짐 현상을 보이지 않았다.

• 한국식품과학회지
• /
• 제21권5호
• /
• pp.676-685
• /
• 1989

농가에서 현재 사용되고 있는 고추건조기의 운전조건을 고추의 건조 모델과 품질변화 모델을 수치해석적 최적화방법인 Box의 complex 방법과 연결하여 최적화를 시도하였다. 주어진 carotenoids. 보존을 만족시키는 제한조건 하에서 에너지소비를 최소화하기 위한 열풍온도, 열풍재순환율, 풍량이 결정되었다. 품질제한 조건이 엄격할수록 낮은 열풍재순환율과 높은 풍량이 사용되어 에너지소비는 증가하고 전체 건조시간은 짧아졌다. 건조 중 건조기내에서 고추의 혼합이 에너지 사용효율과 제품품질을 향상시킬 수 있었다. 현재 사용되고 있는 풍량은 최적운전을 위해서는 증가되어야 하는 것으로 판단되었다. 풍량을 일정하게 적정조건으로 고정하고 열풍의 온도와 재순환율을 2단계로 변화시키는 건조방식이 에너지소비를 더욱 감소시킬 수 있었다. 이러한 2단계 최적건조에서는 단계이동은 전체 건조시간의 약 1/3 부근에서 이루어지고 열풍온도는 첫 단계에서 낮다가 두 번째 단계에서 증가하고 열풍재순환율은 단계변화에 따라 약간 증가하였다. 얻어진 최적제어변수는 건조기내에서의 건조과정과 carotenoids 파괴 kinetics에 의하여 해석될 수 있었다. 얻어진 결과의 실험적 확인이 요청된다.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.76-84
• /
• 2013

The renewable energy sources is raising for use of grid connected systems, for which higher power quality requirements are being issued. A grid connected converter requires a LC-filter stage, this one is lightly damped for efficiency constraints. Hence, it is subject to resonance if excited by the converter current harmonics or pre-exciting grid voltage harmonics. In this paper, an active damping technique employing notch filter for damping of the resonance frequency is introduced. This technique doesn't need to additional sensors. In addition, it is simple to apply for various systems. Monitoring of the resonance frequency ensures the stable operation of the proper connection and disconnection of the grid. This paper proposes the estimating method of a resonant frequency to determine the cut-off frequency of the notch filter. This method is validated by both simulation and experimental results.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.431-444
• /
• 2018

Numerical simulations have been conducted to study the unstart/restart characteristics of an over-under turbine-based combined-cycle propulsion system (TBCC) inlet during the inlet transition phase. A dual-solution area exists according to the Kantrowitz theory, in which the inlet states may be different even with the same input parameters. The entire transition process was divided into five stages and the unstart/restart hysteresis loop for each stage was also obtained. These loops construct a hysteresis surface which separates the operating space of the engine into three parts: in which a) inlet can maintain a started state; b) inlet keeps an unstarted state; c) inlet state depends on its initial state. During the transition, the operation of the engine follows a certain order with different backpressures and splitter angles, namely control route, which may result in disparate inlet states. Nine control routes with different backpressures and transition stages were designed to illuminate the route-dependent behavior of the inlet. The control routes operating towards the unstart boundary can make the inlet transit from a started state into an unstarted one. But operating backward the same route cannot make the inlet restart, additional effort should be made.

• 공학교육연구
• /
• 제21권1호
• /
• pp.3-13
• /
• 2018

The purpose of this study is to propose a teaching and learning model that can effectively manage convergence education, which is one of the concerns of university education, at the level of course. The pre-collaborative instructional design stage is to prepare the operation of the convergence project course. It shares the common goal and establishes a team of relevant professors to set up the actual convergence project topic and establishes cooperation relationships with industry or community as needed. In the convergence project activity, students will be able to understand the learning objectives, learning activities, evaluation methods, and explain the subject of the convergence project by proceeding with the whole orientation. Students organize teams of interest and conduct learning and design activities on convergence technologies and present their results. In the educational improvement activities, professors will share the lesson process and results and discuss improvements through the improvement seminar. As a result of analyzing the effectiveness of the proposed convergence project based teaching and learning model, the convergence project experience has improved the cooperative self - efficacy for the learners and the results were confirmed that students perceived to achieve the expected learning goal and satisfied with their experience.

• Archives of Reconstructive Microsurgery
• /
• 제8권1호
• /
• pp.71-76
• /
• 1999

Until recently, the cranial base tumors were deemed unresectable due to the inability to diagnose the extent of the involvement accurately and to approach and excise the tumor safely. With refinements in CT and NMR scanning and development of craniofacial techniques, reconstruction becomes absolutely crucial in allowing successful resection of these tumors. Resection of these tumors may sometimes result in massive and complex extirpation defects that are not amendable to local tissue closure. In such cases, the free tissue transfer was a useful alternative because it can provide large amount of well-vascularized tissues and reliable separation of intracranial space from bacterial flora of the upper airway. The microvascular free tissue transfer was used in 9 patients at our center to reconstruct the cranial base defects. Of these, 8 were free rectus muscle flaps, and 1 was free latissimua dorsi muscle flap. There were 1 case of partial flap loss and 1 case of postoperative wound infection. The large, complex defects were successfully reconstructed by one stage operation and the functional and aesthetic results were satisfactory with acceptable complication rates.