• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.162-163
• /
• 2014

Operation and maintenance stage consists the largest portion of project life cycle cost. Appropriate management and analysis of such stages have massive effect on the total project cost. The effective prediction of optimized repair period is one of main factors in ㅌ management. However, it has been analyzed that the prediction of appropriate repair period revealed limitations in reliability. Therefore, this study suggests a methodology of repair period prediction by dividing finished projects into similar groups with same properties to be compared with the target project using quantitative variables.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.2
• /
• pp.76-79
• /
• 2015

One of the most serious complications after head and neck radiation is osteoradionecrosis (ORN) of the jaw. The etiology of ORN is extraction, minor dental procedure or dental implant surgery. When ORN of the jaw progressed to stage III, free fibular flap is the most useful methods for reconstruction. In this case report, a 67-year-old ORN patient who underwent fibular free flap reconstruction using simulation surgery with 3-dimensional rapid prototype (3D RP) model was reviewed. After partial mandibulectomy, a osteocutaneous fibula flap was used for reconstruction. Oro-cutaneous fistula was resolved after operation. Patients reported improved food intake after operation without pus discharge. Functional and esthetic results showed successful reconstruction.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.24-26
• /
• 2013

In the process of a mobile network evolution to the All-IP, it is inevitable to experience a transient period embracing both circuit and packet based data traffics. At the stage of those hybrid networks, it is important to build them in an efficient manner in terms of resource utilization which is closely related to the overall system operation cost. Especially, the multimedia telephony is one of the essential services in the advanced packet based mobile networks. In this paper an effective method of system operation is proposed for building up the multimedia telephony service while the legacy network co-exists. The proposed solution is based on the careful investigation of the usage pattern of the multimedia services in the evolving networks. This method is also expected to be a useful guideline for the network resource planning.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.170-174
• /
• 1990

The information with regard to the working range of lathe, cutting tool, cutting condition is managed as Database system for turning operation as one part of CAM system. Data with regard to the working range of lathe, cutting tool, cutting condition are stored by the DBMS(Data Base Management System) and can be added, modified, deleted and retrieved for realtime usages. Data stored in Database system are searched to select the most proper cutting tool and cutting condition with the input data fed from the design stage. Codes in regards to tool shape are displayed on graphic mode for easy selection for user and thus presents a good decision support for tool selection. The system developed in this work is operated by the pull down menu on the IBM PC/AT personal computer, or compatible series.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.309-312
• /
• 2008

In Korea, although the damage from disaster (flood and storm) is increasing, the early stage warning and countermeasure are not in operation rapidly. The research areas of transportation engineering arenot diverse, so once the road is flooded and interrupted, drivers, the system operators and managers are in panic, and nearby roads are in terrible traffic congestion. In case of Korea, the research of evacuation is highly needed, because it is very necessary and easy to apply in real field. In this paper, we establish the concept of transportation disaster prevention system and suggest the directions of it. In addition, based on this research, we choose one example of disasters and establish an example of the transportation disaster prevention system. Our goal is to make steps; prevention, preparation, countermeasure and restoration in the view of minimizing on social chaos and damages emphasizing aspect of transportation countermeasure. This research will be the good precedent of approach, analysis and countermeasure when the disasters are occurred, and a basis of transportation disaster prevention system and manual in Korea.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.50-57
• /
• 1997

A 600HP class high-speed gear driven 3-stage turbo-compressor (IGCC : Integrally Geared Centrifugal Compressor) driven by a 3600 rpm AC induction motor has been designed, of which low speed pinion runs at 35000 rpm and high speed pinion at 50000 rpm nominally. Due to its high speed operation, the system requires very reliable bearing selection and design as well as accurate rotordynamic analysis and prediction of its dynamic behavior to secure the operating reliability. Rotordaynamic analyses of the IGCC rotor-bearing system predicted that the low speed pinion rotor mounted on 5-pad tilting pad bearings has two critical speeds before its design speed and high speed pinion rotor only one critical speed, and estimated critical speeds of both pinion shafts are away from the continuous operating speed enough to satisfy the corresponding API requirement. The forced response analysis with API specified maximum allowable unbalances also showed that unbalance responses are small enough for smooth operation of the system.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.443-450
• /
• 2023

One of the basic tasks in the automobile manufacturing process is to design a bare chassis, which is the basic frame of a vehicle, and a bracket is a member connecting various devices to the frame. Bracket, which is a member connecting the engine, transmission, and suspension, which are the core devices of driving and operating the vehicle, to the frame, must maintain safety during vehicle operation. If the bracket connecting the various devices constituting the vehicle to the frame does not have durability, serious accidents may occur during operation of the vehicle. In this study, we performed stress analysis on the brackets installed in the bare chassis of the 25-passenger bus in the development stage. Based on the stress analysis performed, an improved bracket dimension was proposed.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2004

Advances in microvascular techniques and refinements in microsurgical tissue transfers have enabled surgeons to combine different tissue components and reconstruction into a single-stage operation in extensive or composite defect following injury. Some problems and consideration for extensive or composite defects are form, shape, function, and dimension of the defect sites. Therefore combination of two or more flaps is required to reconstruct extensive or composite defect. This paper presents our clinical experience of four cases of combined free flaps with or without sequential microanastomosis in reconstruction of upper extremity based on peroneal flowthrough, thoracodorsal, and dorsalis pedis vascular system. Satisfactory results were obtained without flap loss and complications. The free flaps were combined in th following fashion; two cases by bridge fashion, one by chimeric microanastomosis and one by simple chimeric fashion. The median follow-up time on all patients was 21.7 months. Donor site morbidity was minimal. Extensive soft tissue or composite defects can be effectively covered by various combined flaps. Even though the risk for complication exists, the options of combination with or without sequential microanastomosis can add a functional or sensory dimension to reconstruction of complex wounds.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.27-33
• /
• 2001

Purpose : To evaluate interim results in terms of failure, cosmetic results and survival after breast conserving operation and radiation therapy in early breast cancer. Material and Methods : From January 1992 through December 1997, seventy two patients with early stage 0, I and II breast cancer were treated with conservative surgery plus radiotherapy at Keimyung University Dongsan Medical Center. Age distribution was 25 to 77 years old with median age of 43. According to TNM stage, five patients had stage 0, thirty three were stage I, twenty five were IIa, and nine were IIb. Most patients underwent excision of all gross tumor and ipsilateral axillary dissection. Breast was irradiated through medial and lateral tangential fields of 6 MV photons to 50.4 Gy in 28 fractions over 5.5 weeks. We delivered a boost irradiation dose of 10 to 16 Gy in 1 to 2 weeks to excision site. Adjuvant chemotherapy was administered in forty one patients with CMF (cyclophosphamide, methotrexate, 5-fluorouracil) regimens of 6 cycles concurrently or before radiation. Cosmetic results were assessed by questionnaire to patients grading of excellent, good, fair, poor. Follow-up periods were 22 to 91 months with median 40 months. Results : Five year disease free survival rate (5YDFS) was $95.8\%$. According to stage, 5YDFS was $100\%,\;96.9\%,\;96\%\;and\;88.9\%$ in stage 0, I, IIa and IIb, respectively. Two patients had distant metastasis and one had local and distant failure. One patient with distant failure had bone and liver metastasis at 14 months after treatment and the other had lung and both supraclavicular metastasis at 21 months after treatment. Patient with local and distant failure had local recurrence on other quadrant in same breast and then salvaged with total mastectomy and chemotherapy but she died due to brain metastasis at 55 months. Complications were radiation pneumonitis in five patients (four patients of asymptomatic, one patients of symptomatic) and hand or arm edema(4 patients). Fifty nine patients answered our cosmetic result questionnaire and cosmetic results were good to excellent in fifty one patients $(86\%)$. Conclusion : We considered that conservative surgery and radiation for the treatment of early stage invasive breast cancer was safe and had excellent survival and cosmetic results. We need to assess about prognostic factors with longer follow up and with large number of patients.

• Journal of Korean Traditional Oncology
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2011

Background & Objectives : Colorectal Cancer is 10% of all cancer incidence and the motality from colorectal cancer is nearly 450,000 a year. Since chemopreventive agents from Herbal medicine is hot issue recently, to prove antitumor effecicacy of Rhus vernifciflua STOKES decoction(Chijong-tang), clinical study was carried out. Here we report two patients with colorectal cancer of stage IV. One is colorectal cancer patient with liver, lung metastases underwent operation, chemotherapy. The other patient with liver metastasis underwent chemotherapy. All of two patients acquired tolerance. Methods : One patient visited Hana oriental medicine Clinic in 2010 and was treated using Chijong-tang for 17 months at Hana Oriental Clinic. The other patient visited Hana oriental medicine Clinic in 2011 and was treated using Chijong-tang for 5 months at Hana Oriental Clinic. Results : Chijong-tang showed no side effect, no more tolerance during its treatment with chemotherapy and tumor size was retarded based on CT scanning. Overall, this case report suggests that Rhus vernifciflua STOKES can be a potent cancer preventive agents for colorectal cancer but it is still required to verify the scientific and clinical evidences for Rhus vernifciflua STOKES decoction (Chijong-tang).