• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.613-618
• /
• 2008

As one way of cost innovation and weight saving of the automobile, the one-piece typed lower control arm was developed for the purpose of replacing the box typed lower control arm. In order to overcome less buckling strength of the one-piece typed lower control arm, the design parameters such as the high strength steel grade, the thickness and the shape of main panel were optimized based on Taguchi method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.218-221
• /
• 2008

Hot Press Forming (HPF), an advanced sheet forming method in which a high strength part can be produced by forming at high temperature and rapid cooling in dies, is one of the most successful forming process in producing components with complex geometric shape, high strength and a minimum of springback. In order to obtain effectively and accurately numerical finite element simulations of the actual HPF process, the flow stress of a boron steel in the austenitic state at elevated temperatures has been investigated with Gleeble system. To evaluate the formability of the thermo- mechanical material characteristics in the HPF process, the FLDo defined at the lowest point in the forming limit diagrams of a boron steel has been investigated. In addition, the simulation results of thermo-mechanical coupled analysis of an automobile one-piece lower-arm part are compared with the experimental ones to confirm the validity of the proposed simulations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.228-229
• /
• 2007

As one way of weight saving of the vehicle, 1-piece typed lower control arm has been developed using high strength hot rolled steel sheet. In order to overcome the edge splitting problem during edge flanging or burring process, HER (hole expansion ratio) value of steel sheet was primarily considered. The strength grade of steel sheet and the shape were optimized utilizing Taguchi method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1190-1197
• /
• 2003

The purpose of this study is to compare and analyze methods of women's apparel prototypes and provide for some useful fundamental data to improve the apparel prototype suitable for Korean women. Two different drafting methods, the Bunka pattern of Japan Bunka Women's University and the Secoli pattern of Italy istituto carlo secoli, an italian pattern drafting institute, were selected. The result and discussion are as follows; In the calculation formula, the Bunka was shown more comfort at arm-hole part, because of it's lower arm-hole depth, wider arm-hole width and lower cap height in comparison with the Secoli. At the shoulder angle, the Bunka is inclined more in front shoulder than the back shoulder, whereas the Secoli is inclined more in back shoulder than the front shoulder. It could explain that the Bunka is suitable for bendforward type and the Secoli is suitable for lean-back type. In the sensory test, the one-piece pattern of the Secoli with 4cm ease was highly estimated in ease. It seems young women's preference to body conscious clothes which reflected in many new elastic fabrics. At the bust point to neck, the Bunka was highly estimated, compared with the Secoli. It seems like to be caused that for the bust point to neck formula, the Bunka used bust girth, the Secoli used stature which has low correlation with the bust point to neck.