• Tuberculosis and Respiratory Diseases
• /
• v.47 no.5
• /
• pp.642-649
• /
• 1999

Background: It is very important to determine an accurate staging of the non-small cell lung cancer(NSCLC) for an assessment of operability and it's prognosis. However, it is difficult to evaluate tumor involvement of mediastinal lymph nodes accurately utilizing noninvasive imaging modalities. PET is one of the sensitive and specific imaging modality. Unfortunately PET is limited use because of prohibitive cost involved with it's operation. Recently hybrid SPECT/PET(single photon emission computed tomography/positron emission tomography) camera based PET imaging was introduced with relatively low cost. We evaluated the usefulness of coincidence detection(CoDe) PET in the detection of metastasis to the mediastinal lymph nodes in patients with NSCLC. Methods: Twenty one patients with NSCLC were evaluated by CT or MRI and they were considered operable. CoDe PET was performed in all 21 patients prior to surgery. Tomographic slices of axial, coronal and sagittal planes were visually analysed. At surgery, mediastinal lymph nodes were removed and histological diagnosis was performed. CoDe PET findings were correlated with histological findings. Results: Twenty of 21 primary tumor masses were detected by the CoDe PET. Thirteen of 21 patients was correctly diagnosed mediastinal lymph node metastasis by the CoDe PET. Pathological N0 was 14 cases and the specificity of N0 of CoDe PET was 64.3%. Sensitivity, specificity, positive predictive value, negative predictive value and accuracy of N1 node was 83.3%, 73.3%, 55.6%, 91.7%, and 76.2% respectively. Sensitivity, specificity, positive predictive value, negative predictive value and accuracy of N2 node was 60.0%, 87.5%, 60.0%,87.5%, and 90.0% respectively. There were 3 false negative cases but the size of the 3 nodes were less than 1cm. The size of true positive nodes were 1.1cm, 1.0cm, 0.5cm respectively. There were 1 false positive among the 12 lymph nodes which were larger than 1cm. False positive cases consisted of 1 tuberculosis case, 1 pneumoconiosis case and 1 anthracosis case. Conclusion: CoDe PET has relatively high negative predictive value in the enlarged lymph node in staging of mediastinal nodes in patients with NSCLC. Therefore CoDe PET is useful in ruling out metastasis of enlarged N3 nodes. However, further study is needed including more number of patients in the future.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.28-28
• /
• 2015

Clubroot disease caused by Plasmodiophora brassicae induces severe losses of cruciferous vegetables worldwide. To control clubroot of Chinese cabbage, many CR (clubroot resistance) F1 hybrid cultivars have been bred and released in Korea, China and Japan. In this study, we determined the race of P. brassicae 12 field isolates, which collected from 10 regions in Korea, using Williams' differential varieties including two cabbage ('Jersey Queen', 'Badger Shipper') and two rutabaga ('Laurentian', 'Whilhelmsburger'). By Williams' differential varieties, 12 clubroot pathogens were assigned into one (GN2), two (HS and YC), two (HN1 and HN2), three (DJ, KS and SS) and four (GS, GN1, JS and PC) isolates for races 1, 2, 4, 5 and 9, respectively. In addition, the degree of resistance of 45 CR cultivars that were from Korea, China and Japan was tested with the 12 isolates. The 45 CR cultivars of Chinese cabbage were differentiated into three genotypes according to their resistance responses. Even though the 12 P. brassicae isolates were same race by Williams' differential varieties, three CR genotypes showed different resistance response to the isolates. These results indicate that races of P. brassicae by Williams' differentials were not related with resistance of CR cultivars, and three CR genotypes represented qualitative resistance to the P. brassicae isolates. CR genotype I including 'CR-Cheongrok' showed resistance to GN1, GN2, JS, GS, HS, DJ and KS isolates and susceptibility to YC, PC, HN1, HN2 and SS isolates. And CR genotype II such as 'Hangkunjongbyungdaebaekchae' was resistant to GN1, GN2, JS, GS, HS, YC, PC and HN1 and susceptible to DJ, KS, SS and HN2. CR genotype III including 'Chunhajangkun' and 'Akimeki' represented resistance to 10 isolates except for SS and HN2 isolates. Based on these results, we selected 'CR-Cheongrok', 'Hangkunjongbyungdaebaekchae', and 'Chunhajangkun' as a representative cultivar of three CR genotypes and 'Norangkimjang' as a susceptible cultivar. Furthermore, we investigated the resistance of 15 lines of Chinese cabbage, which were provided by seed companies, to 11 isolates except for HN1 of P. brassicae. The results showed that three lines were susceptible to all the tested isolates, whereas five, four, and three lines represented the similar responses corresponding to the CR genotypes I, II, and III, respectively; there is no line of Chinese cabbage showing different resistance patterns compared to three CR genotypes. In particular, line 'SS001' showing resistance responses of CR genotype II was a parent of 'Saerona' that have been commercialized as a CR $F_1$ cultivar of Chinese cabbage. Together, we divided 12 isolates of P. brassicae into 4 races, designated by wild type, mutant type 1, mutant type 2, and mutant type 3. Wild type including GN1, GN2, JS, GS, and HS isolates of P. brassicae was not able to infect all the cultivars of three CR genotypes, whereas, mutant type 3 such as SS and HN2 isolates developed severe clubroot disease on all the CR genotype cultivars. To mutant type 1 including DJ and KS isolates, CR genotypes I, II and III were resistant, susceptible and resistant, respectively. In contrast, to mutant type 2 including YC, PS, and HN1 isolates, CR genotypes I, II and III showed susceptibility, resistance and resistance, respectively. Taken together, our results provide the extended knowledge of classification of P. brassicae races, which is useful information for the breeding of resistant crops, with a suggestion that 'Norangkimjang', 'CR-Cheongrok', 'Saerona' and 'Chunhajangkun' cultivars of Chinese cabbage could be used as new race differentials of P. brassicae for clubroot disease assay.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.27-28
• /
• 2014

Beauveria bassiana (Cordycipitaceae, Hypocreales, Ascomycota) is an anamorphic fungus having a potential to be used as a biological control agent because it parasitizes a wide range of arthropod hosts including termites, aphids, beetles and many other insects. A number of bioactive secondary metabolites (SMs) have been isolated from B. bassiana and functionally verified. Among them, beauvericin and bassianolide are cyclic depsipeptides with antibiotic and insecticidal effects belonging to the enniatin family. Non-ribosomal peptide synthetases (NRPSs) play a crucial role in the synthesis of these secondary metabolites. NRPSs are modularly organized multienzyme complexes in which each module is responsible for the elongation of proteinogenic and non-protein amino acids, as well as carboxyl and hydroxyacids. A minimum of three domains are necessary for one NRPS elongation module: an adenylation (A) domain for substrate recognition and activation; a tholation (T) domain that tethers the growing peptide chain and the incoming aminoacyl unit; and a condensation (C) domain to catalyze peptide bond formation. Some of the optional domains include epimerization (E), heterocyclization (Cy) and oxidation (Ox) domains, which may modify the enzyme-bound precursors or intermediates. In the present study, we analyzed genomes of B. bassiana and its allied species in Hypocreales to verify the distribution of NRPS-encoding genes involving biosynthesis of beauvericin and bassianolide, and to unveil the evolutionary processes of the gene clusters. Initially, we retrieved completely or partially assembled genomic sequences of fungal species belonging to Hypocreales from public databases. SM biosynthesizing genes were predicted from the selected genomes using antiSMASH program. Adenylation (A) domains were extracted from the predicted NRPS, NRPS-like and NRPS-PKS hybrid genes, and used them to construct a phylogenetic tree. Based on the preliminary results of SM biosynthetic gene prediction in B. bassiana, we analyzed the conserved gene orders of beauvericin and bassianolide biosynthetic gene clusters among the hypocrealean fungi. Reciprocal best blast hit (RBH) approach was performed to identify the regions orthologous to the biosynthetic gene cluster in the selected fungal genomes. A clear recombination pattern was recognized in the inferred A-domain tree in which A-domains in the 1st and 2nd modules of beauvericin and bassianolide synthetases were grouped in CYCLO and EAS clades, respectively, suggesting that two modules of each synthetase have evolved independently. In addition, inferred topologies were congruent with the species phylogeny of Cordycipitaceae, indicating that the gene fusion event have occurred before the species divergence. Beauvericin and bassianolide synthetases turned out to possess identical domain organization as C-A-T-C-A-NM-T-T-C. We also predicted precursors of beauvericin and bassianolide synthetases based on the extracted signature residues in A-domain core motifs. The result showed that the A-domains in the 1st module of both synthetases select D-2-hydroxyisovalerate (D-Hiv), while A-domains in the 2nd modules specifically activate L-phenylalanine (Phe) in beauvericin synthetase and leucine (Leu) in bassianolide synthetase. antiSMASH ver. 2.0 predicted 15 genes in the beauvericin biosynthetic gene cluster of the B. bassiana genome dispersed across a total length of approximately 50kb. The beauvericin biosynthetic gene cluster contains beauvericin synthetase as well as kivr gene encoding NADPH-dependent ketoisovalerate reductase which is necessary to convert 2-ketoisovalarate to D-Hiv and a gene encoding a putative Gal4-like transcriptional regulator. Our syntenic comparison showed that species in Cordycipitaceae have almost conserved beauvericin biosynthetic gene cluster although the gene order and direction were sometimes variable. It is intriguing that there is no region orthologous to beauvericin synthetase gene in Cordyceps militaris genome. It is likely that beauvericin synthetase was present in common ancestor of Cordycipitaceae but selective gene loss has occurred in several species including C. militaris. Putative bassianolide biosynthetic gene cluster consisted of 16 genes including bassianolide synthetase, cytochrome P450 monooxygenase, and putative Gal4-like transcriptional regulator genes. Our synteny analysis found that only B. bassiana possessed a bassianolide synthetase gene among the studied fungi. This result is consistent with the groupings in A-domain tree in which bassianolide synthetase gene found in B. bassiana was not grouped with NRPS genes predicted in other species. We hypothesized that bassianolide biosynthesizing cluster genes in B. bassiana are possibly acquired by horizontal gene transfer (HGT) from distantly related fungi. The present study showed that B. bassiana is the only species capable of producing both beauvericin and bassianolide. This property led to B. bassiana infect multiple hosts and to be a potential biological control agent against agricultural pests.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.185-192
• /
• 2006

This experiment was conducted to assess genetic diversity of waxy corn inbred lines and to identify SSR markers related to major characteristics affected kernel quality for improving waxy corn $F_1$ hybrid with good quality. Diversity of 64 waxy com inbred lines was evaluated using 30 microsatellite markers. The 30 microsatellite markers representing 30 loci in the maize genome detected polymorphisms among the 64 inbred lines and revealed 225 alleles with a mean of 7.5 alleles per primer. The polymorphism Information content (PIC) value ranged from 0.14 to 0.87, with an average of 0.69. Based on Nei's genetic distances, the 64 inbred lines were classified into 9 groups by the cluster analysis. The group I included 26 inbred lines (41%), other groups included 3 to 9 inbred lines. One-way analysis of variance was conducted to identify significant relationship between individual markers and major characteristics that affect kernel quality. The analysis showed that umc1019 was related to amylopectin and crude protein content, me 1020 to amylopectin content and peak viscosity, and bnlg1537 to 100-kernel weight, kernel length, and kernel width.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.92-100
• /
• 2016

Low-temperature conversion of nitrogen oxides using plasma-assisted hydrocarbon selective catalytic reduction of (HC-SCR) was investigated. Plasma was created in the catalyst-packed bed so that it could directly interact with the catalyst. The effect of the reaction temperature, the shape of catalyst, the concentration of n-heptane as a reducing agent, the oxygen content, the water vapor content and the energy density on $NO_x$ removal was examined. $NO_x$ conversion efficiencies achieved with the plasma-catalytic hybrid process at a temperature of $250^{\circ}C$ and an specific energy input (SIE) of $42J\;L^{-1}$ were 83% and 69% for one-dimensional Ag catalyst ($Ag\;(nanowire)/{\gamma}-Al_2O_3$) and spherical Ag catalyst ($Ag\;(sphere)/{\gamma}-Al_2O_3$), respectively, whereas that obtained with the catalyst-alone was considerably lower (about 30%) even with $Ag\;(nanowire)/{\gamma}-Al_2O_3$ under the same condition. The enhanced catalytic activity towards $NO_x$ conversion in the presence of plasma can be explained by the formation of more reactive $NO_2$ species and partially oxidized hydrocarbon intermediates from the oxidation of NO and n-heptane under plasma discharge. Increasing the SIE tended to improve $NO_x$ conversion efficiency, and so did the increase in the n-heptane concentration; however, a further increase in the n-heptane concentration beyond $C_1/NO_x$ ratio of 5 did not improve the $NO_x$ conversion efficiency any more. The increase in the humidity affected negatively the $NO_x$ conversion efficiency, resulting in lowering the $NO_x$ conversion efficiency at the higher water vapor content, because water molecules competed with $NO_x$ species for the same active site. The $NO_x$ conversion efficiency increased with increasing the oxygen content from 3 to 15%, in particular at low SIE values, because the formation of $NO_2$ and partially oxidized hydrocarbon intermediates was facilitated.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.180-185
• /
• 2003

The increase of traffic over a bridge has been emerged as one of the most severe problems in view of bridge maintenance, since the load effect caused by the vehicle passage over the bridge has brought out a long-term damage to bridge structure, and it is nearly impossible to maintain operational serviceability of bridge to user's satisfactory level without any concern on bridge maintenance at the phase of completion. Moreover, bridge maintenance operation should be performed by regular inspection over the bridge to prevent structural malfunction or unexpected accidents front breaking out by monitoring on cracks or deformations during service. Therefore, technical breakthrough related to this uninterested field of bridge maintenance leading the public to the turning point of recognition is desperately needed. This study has the aim of development on automated inspection system to lower surface of bridge superstructures to replace the conventional system of bridge inspection with the naked eye, where the monitoring staff is directly on board to refractive or other type of maintenance .vehicles, with which it is expected that we can solve the problems essentially where the results of inspection are varied to change with subjective manlier from monitoring staff, increase stabilities in safety during the inspection, and make contribution to construct data base by providing objective and quantitative data and materials through image processing method over data captured by cameras. By this system it is also expected that objective estimation over the right time of maintenance and reinforcement work will lead enormous decrease in maintenance cost.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.2
• /
• pp.117-122
• /
• 2013

BACKGROUND: The scab, which is caused by Venturia nashicola, gives serious damages to pear trees. 'Niitaka' accounts for 82% of areas in pear cultivation. However 'Niitaka' is a scab susceptible cultivar. So, most of Korean farmers who growing pear trees have suffered by economic losses with the scab. In this research, we evaluated the scab resistance among elite pear seedlings to clarify genetics about the scab resistance. And we analyzed photosynthetic features with these seedlings to develop suitable cultivar which is advantageous for producing quality fruits during the growth and development of plants. METHODS AND RESULTS: We measured the rates of scab incidence among seedlings in a field experiment condition and an in-vitro test. An in-vitro test has been done with field experiment-based results. We made plant materials by grafting branches of each seedlings with 'Kongbae' rootstocks. And they had been grown for one month. Then, scab conidia suspension is sprayed to seedlings and sustained for 40 days under the controlled environment. As the results, 6 seedlings displayed lower incidence rates than other seedlings and 'Niitaka'. We also measured instant photosynthetic rates of each seedlings to determine the correlation between photosynthetic rates and fruit characteristics. However, it seemed that there is no correlation between them. CONCLUSION(S): Among the seedlings, 6 seedlings displayed the higher resistance to scab than other seedlings and 'Niitaka'. This characteristics is considered to be come from the gene expression of European pear. And we found that photosynthetic rate in trees rarely does not influence the fruit characteristics. It is considered to be affected by cultivar's own characteristics.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.378-383
• /
• 2001

Embryo culture, ovule culture and ovary slice culture were tested to find optimum method for overcoming post fertilization barrier in interspecific crosses between L. longiflorum 'Gelria' and L. cernuum. Although reciprocal crosses between the species were carried out by cut-style pollination method, fruits developed only in crosses of L. longiflorum${\times}$L. cernuum. On the 40 days after pollination, ovaries were sliced into 2-4mm thickness and cultured on a hormone-free Murashige-Skoog (MS) medium, supplemented with 2%, 4%, 6%, 8% and 10% sucrose. For the L. longiflorum Gelria'${\times}$L. cernuum cross, ovule development was found to be best at 6% sucrose and a lot of hybrid plant lets established directly from the ovary slice culture and subsequent ovule culture. High concentration of sucrose above 8% made ovules abort or vitrificate from 40 days after culture. In contrast, ovules from the L. cernuum${\times}$L. longiflorum 'Gelria' cross swelled well in ovary slice culture, however, they did not germinated in subsequent ovule culture. On the 60 days after pollination, ovules thicker than 0.6mm was interpreted as one containing embryo. The embryo size ranged from 1.2 mm to 1.7 mm, and in vitro development of the excised embryos was found to be best with the MS medium (pH 5.8), supplemented with $0.1-1 mg{\cdot}L^{-1}$ NAA and 6% sucrose. Thick ovules excised 60 days after pollination germinated about 60% as normal seeds in MS medium supplemented with 6% sucrose and free hormone. The ovule culture 60 days after pollination was concluded to be most recommendable to produce interspecific hybrids in large scale crosses between L. longiflorum 'Gelria' and L. cernuum by the reason of easy procedure.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.4 no.1
• /
• pp.18-28
• /
• 2005

Purpose: The purpose of this study is to evaluate the clinical, radiological and histopathological results after microfracture surgery for degenerative arthritis of the knee. Materials and Methods: From Oct. 1997 to Dec. 1998, 48 knees in 46 patients were treated by microfracture technique. Their mean age at the time of operation was 56 years(range, 40-75 years) and mean period of follow-up study was one year(range, 7-20 months). For 24 knees in 22 patients, 'second-look' arthroscopies and biopsies were performed at 6 months following microfracture. At the last follow up clinical results were evaluated with Baumgaertner's scale. The specimens of 24 cases were stained with H-E, Safranin-O, and Masson's trichrome. Eighteen of 24 cases were stained immunohistochemically and the Western blotting test was performed on 12 cases for type II collagen. We analyzed the relationship of the Western blotting for type II collagen with clinical score, preoperative varus deformity, joint space widening in radiological result, extent of repaired articular cartilage in '2nd-look' arthroscopic findings, patient's age and weight. Results: Clinical results were excellent in 90% and good in 10%. Among the 24 knees, more than 80% of areas of chondral defect were covered with regenerated cartilage in 21 knees Histologically, the repaired tissue appears to be a hybrid of hyaline cartilage and fibrocartilage. Repaired cartilage contains variable amounts of type II collagen with immunohistochemical staining. The results of the Western blotting test were similar. The amounts of type II collagen formation had positive correlation with the extent of repaired cartilage and preoperative varus deformity. Conclusion: 'Second-look' showed that the chondral defect areas were covered with newly grown grayish white tissue. Articular cartilage repair was confirmed with histological and immunohisto-chemical study qualitatively, and the amount of type II collagen was calculated with the Western blotting test quantitatively. The exact nature and fate of repaired cartilagenous tissues need further long term follow-up study. The results of this study provide the rationale to select osteoarthritic patients indicated for microfracture surgery.