• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.85-94
• /
• 2007

This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.526-539
• /
• 2015

Stirling engines are regarded as an efficient and promising power system for underwater devices. Currently, many researches on one-dimensional model is used to evaluate thermodynamic performance of Stirling engine, but in which there are still some aspects which cannot be modeled with proper mathematical models such as mechanical loss or auxiliary power. In this paper, a four-cylinder double-acting Stirling engine for Unmanned Underwater Vehicles (UUVs) is discussed. And a one-dimensional model incorporated with empirical equations of mechanical loss and auxiliary power obtained from experiments is derived while referring to the Stirling engine computer model of National Aeronautics and Space Administration (NASA). The P-40 Stirling engine with sufficient testing results from NASA is utilized to validate the accuracy of this one-dimensional model. It shows that the maximum error of output power of theoretical analysis results is less than 18% over testing results, and the maximum error of input power is no more than 9%. Finally, a Stirling engine for UUVs is designed with Schmidt analysis method and the modified one-dimensional model, and the results indicate this designed engine is capable of showing desired output power.

• Nuclear Engineering and Technology
• /
• v.33 no.4
• /
• pp.409-422
• /
• 2001

The dynamic character of a system of the governing differential equations for the one- dimensional two-fluid model, where the momentum flux parameters are employed to consider the velocity and void fraction distribution in a flow channel, is investigated. In response to a perturbation in the form of a＇traveling wave, a linear stability analysis is peformed for the governing differential equations. The expression for the growth factor as a function of wave number and various flow parameters is analytically derived. It provides the necessary and sufficient conditions for the stability of the one-dimensional two-fluid model in terms of momentum flux parameters. It is demonstrated that the one-dimensional two-fluid model employing the physical momentum flux parameters for the whole range of dispersed flow regime, which are determined from the simplified velocity and void fraction profiles constructed from the available experimental data and $C_{o}$ correlation, is stable to the linear perturbations in all wave-lengths. As the basic form of the governing differential equations for the conventional one-dimensional two-fluid model is mathematically ill posed, it is suggested that the velocity and void distributions should be properly accounted for in the one-dimensional two-fluid model by use of momentum flux parameters.s.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.157-167
• /
• 2017

The two-way quality theory has been widely used as a method for classifying quality attributes for several decades. In particular, the Kano model that classifies attributes into not just conventional one-dimensional but must-be and attractive has gained popularity due to its applicability and ease of use. However, the wordings of the five alternatives in the Kano's questionnaire has been criticised for unclear meanings. This study proposes a new two-way model to classify attributes using 5-point Likert scale alternatives. For this, the current paper investigated a case of TV sets to examine how the proposed model works in comparison with the Kano model. The application results of the proposed model are different from the original one. The two-way model classifies quality attributes in more detail such as the "one-dimensional with an attractive tendency" attribute, which has a greater influence on satisfaction than dissatisfaction, the opposite "one-dimensional with a must-be tendency" attribute, and "highly one-dimensional" and "less one-dimensional" attributes. In this study, a potential satisfaction coefficient (PSC), a potential dissatisfaction coefficient (PDC), and an average potential coefficient (APC) to manage quality attributes are proposed and discussed for their utilization.

• Journal of Korean Society for Quality Management
• /
• v.31 no.4
• /
• pp.219-225
• /
• 2003

Two­dimensional warranty data can be modelled using two different approaches： two­dimensional point process and one­dimensional point process with usage as a function of age. The first approach has three different models. First of all, bivariate model is appealing but is not appropriate for explaining warranty claims. Next, the rest of the two models (marked point process, and counting and matching on both directions independently) are more appropriate for explaining warranty claims. However, the second one (counting and matching on both directions independently) assumes that the two variables (variables representing the two­dimensions) are independent. Last of all, one­dimensional point process with usage as a function of age is also promising to explain the two­dimensional warranty claims. But the models or variations of them need more investigation to be applicable to real warranty claim data.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.168-173
• /
• 2011

Based on the distinctive characteristics observed in the intensity transmittance of an IPS-LC panel, the previous one-dimensional model is greatly reduced such that only a few data points and their interpolations predict the intensity transmittance of an IPS-LCD with a small error for arbitrary gray levels. Experimental procedure and numerical methods are described in detail.

• Structural Engineering and Mechanics
• /
• v.33 no.5
• /
• pp.621-633
• /
• 2009

In this paper we compare the solution of the one-dimensional beam model and the numerical solution of the two-dimensional linearized elasticity problem for rectangular domain of the beam-like form. We first derive the beam model starting from the two-dimensional linearized elasticity, the same way it is derived from the three-dimensional linearized elasticity. Then we present the numerical solution of the two-dimensional problem by finite element method. As expected the difference of two approximations becomes smaller as the thickness of the beam tends to zero. We then analyze the applicability of the one-dimensional model and verify the main properties of the beam modeling for thin beams.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.439-446
• /
• 1994

Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluld mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further development of active elements which are essenclal in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1321-1326
• /
• 2002

A numerical model is investigated to predict a behavior of the gaseous volatile organic compounds and a subsurface contamination caused by them in the unsaturated zone. Two dimensional advective-dispersion equation caused by a density difference and two dimensional diffusion equation are computed by a finite difference method in the numerical model. A laboratory experiment is also carried out to compare the results of the numerical model. The dimensions of the experimental plume are 1.2m in length, 0.5m in height, and 0.05m in thickness. In comparing the result of 2 methods used in the numerical model with the one of the experiment respectively, the one of the advective-dispersion equation shows better than the one the diffusion equation.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.75-78
• /
• 2012

Rotary kiln furnace is one of the most widely used reactors in industrial field. In this paper, 0-dimensional heat and mass balance for direct coal flame rotary kiln was performed preferentially, then a simplified 1-dimensional model was developed based on 0-dimensional analysis data to proceed additional thermal analysis. Compared the results with the currently operating rotary kiln data to validate 1-dimensional model. Through this procedure, it can help to derive fundamental idea for design and operation of rotary kiln.