• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.70-81
• /
• 2017

Various components of an engine nozzle are modeled as flexible multi-body components that are operated under high temperature and pressure. In this paper, in order to predict complex behavior of an engine nozzle, thermo-fluid-flexible multi-body dynamics coupled analysis framework was developed. Temperature and pressure on the nozzle wall were obtained by the steady-state flow analysis for a two-dimensional nozzle. The pressure and temperature-dependent material properties were delivered to the flexible multi-body dynamics analysis. Then the deflection and strain distribution for a nozzle configuration was obtained. Heat conduction and thermal analyses were done using MSC.NASTRAN. The present framework was validated for a simple nozzle configuration by using a one-way coupled analysis. A two-way coupled analysis was also performed for the simple nozzle with an arbitrary joint clearance, and an asymmetric flow was observed. Finally, the total strain result for a realistic nozzle configuration was obtained using the one-way and two-way coupled analyses.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.292-298
• /
• 1991

본 연구에서는 입자질량고적재(high particle mass loading)의 경우가 전혀 고려되지 않았으며, 이것은 물론 임팩터가 사용되는 대부분의 경우, 즉, 대기중입자를 포집하는 경우에 입자의 적재량이 미소하기 때문이다. 그러나 임팩터 혹은 이와 유 사한 기능을 하는 장치의 응용은 매우 광범위하여 이중에는, OWG(optical wave guide) 제작이나 페인트 스프레이(paint spray) 또 입자공급장치에서 큰 입자를 걸러 낼 때와 같이, 입자의 적재량이 큰 경우도 적지 않다. 이러한 입자질량 고적재인 경우에는 입자운동이 기체유동장을 변화시키며 이에 따라 입자운동 자체도 변화되어진다. 본 연구에서는 이러한 관계를 분석하여 입자질량의 적재량정도가 입자의 포집효율에 미치 는 영향을 밝혀내었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.641-646
• /
• 1998

In order to enhance the dynamic and interactive simulation capability of a system thermal hydraulic code for nuclear power plant, applicability of flow network models in SINDA/FLUIN $T^{™}$ has been tested by modeling feedwater system and coupling to DSNP which is one of a system thermal hydraulic simulation code for a pressurized heavy water reactor. The feedwater system is selected since it is one of the most important balance of plant systems with a potential to greatly affect the behavior of nuclear steam supply system. The flow network model of this feedwater system consists of condenser, condensate pumps, low and high pressure heaters, deaerator, feedwater pumps, and control valves. This complicated flow network is modeled and coupled to DSNP and it is tested for several normal and abnormal transient conditions such turbine load maneuvering, turbine trip, and loss of class IV power. The results show reasonable behavior of the coupled code and also gives a good dynamic and interactive simulation capabilities for the several mild transient conditions. It has been found that coupling system thermal hydraulic code with a flow network code is a proper way of upgrading simulation capability of DSNP to mature nuclear plant analyzer (NPA).

• 한국해양공학회지
• /
• 제31권1호
• /
• pp.14-21
• /
• 2017

The erosion of solid particles in a pipe elbow was numerically investigated. A numerical procedure to estimate the sand erosion rate, as well as the particle motion, in the pipe elbow flow was introduced. This procedure was performed based on the combined empirical erosion model and computational fluid dynamics (CFD) analysis to consider the interaction between the particle motion and the eroded surface. The underlying turbulent flow on an Eulerian frame is described by the Reynolds averaged Navier-Stokes (RANS) equations with a $k-{\epsilon}$ turbulent model. The one-way coupled Eulerian-Lagrangian motion of the air flow and sand particles is employed to simulate the particle trajectories and particle-wall interactions on the pipe surfaces. The predicted CFD erosion magnitudes are compared with experimental data from pipe elbows. The erosion rate results do not reveal a good accordance between the simulation and experimental results. It seems that the CFD shows a slightly over-predicted erosion ratio.

• 한국지능시스템학회논문지
• /
• 제25권3호
• /
• pp.299-305
• /
• 2015

Global environmental concerns and the ever increasing need of energy, coupled with steady progress in renewable energy technologies, are opening up new opportunities for utilization of renewable energy resources. Distributed electricity generation is a suitable option for sustainable development thanks to the load management benefits and the opportunity to provide electricity to remote areas. Solar energy being easy to harness, non-polluting and never ending is one of the best renewable energy sources for electricity generation in present and future time. Due to the random and intermittent nature of solar source, PV plants require the adoption of an energy storage and management system to compensate fluctuations and to meet the energy demand during night hours. This paper presents an efficient, economic and technical model for the design of a MPPT based grid connected PV with battery storage and management system. This system satisfies the energy demand through the PV based battery energy storage system. The aim is to present PV-BES system design and management strategy to maximize the system performance and economic profitability. PV-BES (photovoltaic based battery energy storage) system is operated in different modes to verify the system feasibility. In case of excess energy (mode 1), Li-ion batteries are charged using CC-CV mechanism effectively controlled by fuzzy logic based PID control system whereas during the time of insufficient power from PV system (mode 2), batteries are used as backup to compensate the power shortage at load and likewise other modes for different scenarios. This operational mode change in PV-BES system is implemented by State flow chart technique based on SOC, DC bus voltages and solar Irradiance. Performance of the proposed PV-BES system is verified by some simulations study. Simulation results showed that proposed system can overcome the disturbance of external environmental changes, and controls the energy flow in efficient and economical way.

• 한국수자원학회논문집
• /
• 제45권1호
• /
• pp.39-52
• /
• 2012

유역내에서 발생하는 유출은 지표 유출과 지표하 유출이 있으며, 서로 상호작용 상태를 유지하게 된다. 일반적으로 지표와 지표하 둘 중 한 가지 알고리즘으로 해석이 힘든 유역에 대해 지표와 지표하 사이의 동적인 관계를 상세하게 모의해야 하는 경우 상호작용에 관한 요소를 고려하여야 한다. 동적인 상호작용 시스템의 구동에서는 시 공간적인 매개변수가 중요하며, 적절한 모의를 위해시 공간적인 매개변수는 시스템 상에서 지표와 지표하 항에 대한 복합적인 메카니즘으로 구성되어야 한다. 본 연구에서는 이러한 지표 및 지표하 유출의상호작용에 관한 알고리즘을 위해 2차원 확산파 방정식을 이용하여 지표 유출을 해석하고, Darcy의 법칙과 Dupuit-Forchheimer의 가정을 이용한 Boussinesq 방정식을 적용하여 포화상태의 지표하 유출의 알고리즘을 구성하였다. 커플링 방정식으로 공간에 대해서는 유한체적법을 사용하고, 시간에 대해서는 Crank-Nicolson 방법을 이용하였으며, 지표와 지표하 흐름의 상호작용에 대해서는 질량보존의 법칙에 기반하여 구성하였다. 이상의 과정을 통하여 지표 유출해석, 지표하 유출해석, 상호작용, 수치해석 부분의 4가지 주요 모듈을 만들었으며, 4가지 주요 모듈을 통합하여 복합유역의 지표 및 지표하 유출해석 모듈을 개발하였다.