• 소성∙가공
• /
• 제20권5호
• /
• pp.357-361
• /
• 2011

A beryllium copper alloy(C1720) sheet was stretch-drawn using different processes. A hemispherical punch was first used and the forming behavior was examined. Then, cylindrical cups with a hemispherical head were produced by either one-step drawing or two-step forming(sequential stretch forming-drawing). The one-step drawing showed the better formability than two-step forming. However, the two-step forming was the superior process in terms of attaining shape accuracy.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.339-346
• /
• 2003

Stainless steel wire has been used in industry, dental and medical parts. Especially, it has been used widely for the dental orthodontic materials. The orthodontic wire requires good mechanical properties, such as elastic strength, combined with a high resistance to corrosion. To increase elastic strength and good corrosion resistance, drawing methods(one-step and two-step drawing) have been used and the electrochemical characteristics of drawed wire have been researched using potentiodynamic method in 0.9％NaCl and field emission scanning electron microscope. The one-step drawed wire showed the formation of rough surface. The hardness and tensile strength of two-step drawed wire increased. For the case of two-step drawed wire, the corrosion resistance and pitting potential increased compared with one-step drawed wire due to the drawing induced small surface roughness, such as scratch. The passivation and active current density decreased as the reduction in area for drawing increased.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.198-204
• /
• 1993

The study is concerned with finite element analysis and design of axisymmetric deep drawing by local heating. When the bottom shape of a cup is not flat but in complex-shaped, i.e., hemispherical, the cup cannot be drawn in one or two processes in the conventional deep drawing process and the limit drawing ratio is limited as well. By introducing local heating selectively with regards to the heating position, the formability of the sheet metal can be greatly increased with the reduced number of processes. In the Process analysisthe rigid- viscoplastic finite element method is employed and the temperature effect is incorporated. Bishop's step-wise decoupled method is employed to analyze the thermomechanical interaction between deformation and heat transfer. Axisymmetric deep drawing of a hemisphere-bottomed cup has been analyzed for various combinations of heat application in the punch and the die. At the first stage of deep drawing stretch forming is practically carried out by firmly pressing the blankholder with the punch and the die heated at various levels of temperature. Then at the second stage the same cup is drawn for the saame or different combination of temperature. From the computation, it has thus been shown that the fromability of a cup is greatly increased in two-stage deep drawing with increased limet drawing ratio.

• 복식문화연구
• /
• 제8권5호
• /
• pp.717-725
• /
• 2000

The purpose of this study was, as an experimental one, to suggest concrete ways to use computer in fashion design from information collection to design completion, and to present a real example based on the suggested ways. The first step to attain the purpose was gathering various sorts of worldwide fashion design information on the Internet, and then the collected data were inserted in a graphic file. Next, two methods of fashion design that use computer graphics were recommended : one was to produce fashion design just by altering some of the inputted Internet fashion materials, and the other was to do it after selected basic materials were put in database. Those methods could enable one to do fashion design just with rearrangement and smallest change of the prepared basic materials, without drawing directly, and at the same time, they could minimize time and efforts required for computer fashion design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1999-2004
• /
• 2008

This study is about to constructing BOM for managing and integrating information, which is drawing, technical data, attribution, design, ordering, cost, weight, process, service, etc. based on train's system, elements, substructure, assembly, components, parts during whole train's lifetime of the next generation. The BOM is the mostly basic structure information as hierarchical data what are parts consisted specific products. The BOM was utilized as essential elements for collectively managing through informing all of the business activity from ordering to supplying. The BOM in railroad is consist of two parts. One is Engineering BOM for design, the other is Production BOM for production, which are utilized in development calculating the quantity of materials. Also the Maintenance BOM is applied to suppling parts and managing malfunction in railroad corporation like the Seoul Metro. There are many kind of BOMs, because of the special character for each step. Therefore We have need to develop BOM which is able to integrate drawing, technical data for helping good circulation between RAMS applied maintenance using database and helpful know-how for development and production. Also the BOM of the next generation must be consisted regard to whole life-cycle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1463-1466
• /
• 2003

Korean tank has been used from the end of 1980's. Even though Korean tank is regarded as the tank which is made in Korea, a lot of parts still need to be imported from abroad. Therefore, the localization for the parts of Korean Tank is necessary to be set free from the rate of dependence on imports. In this research, one of the most important part of Korean Tank, Lever, was considered to carry out localization. For the first step, two dimensional drawing and three dimensional modeling of the Lever was done. Secondly, the stress analysis was carried out for Lever and it is shown that the predictions of the proposed modeling are in very good agreement with the expected results.

• 한국의상디자인학회지
• /
• 제12권1호
• /
• pp.25-34
• /
• 2010

Design in the 21st Century requires showing extraordinary and revolutionary possibilities by merging multiple cultures or different art forms. 21C fashion also increases its's complexity through the blending in of other design field's styles and forms. In other words, 21C's fashion design involves not only clothing, but combines techniques, aspects and functions fulled from various design categories. As a result, Current fashion design becomes more unique, and shows various styles. From this point of view, this study focuses on creating and suggesting unique textile designs through the understanding of design processes of textiles, which are inspired by high tech architectural structures. The fundamental shape of the architectural structures were simplified into thick lines and geometric shapes. these design elements were then transferred into textile designs. As a result, unique textile looks were created, and were applied to the apparel designs by CAD to see 3d simulations. Exchanging or merging ideas of different design categories leads innovative and fresh looks. 21C is rapidly changing, and designers need to continually introduce new looks every season. Incorporating 21st Century consumption patterns, designers must understand the process of creating original designs through various methods. The innovative fabric designs for this study involved a creative process of drawing from a step by step breakdown of two separate design fields, which were then merged into one finished design. The data and research from this study can be used as a reference tool for any further applicable fashion and textile designs in the future.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2015년도 춘계학술대회 및 임시총회
• /
• pp.20-20
• /
• 2015

Endophytic fungi are microorganisms inhabiting living plant tissues without causing apparent harm to the host. They are drawing increasing attention due to their ability to produce various bioactive compounds as well as their effects on host growth and resistance to biotic and abiotic stresses. As a first step to assess biodiversity of plant associated fungi in Korea and the following evaluation on diverse biological activities, we are collecting endophytic fungi from plant in wild followed by systematic long-term storage in liquid nitrogen. Molecular identification using ITS sequences was also incorporated for pure culture by hyphal tip isolation. As of April 2015, about 1,400 fungal strains had been isolated from about 170 plant taxa. Fungal isolates belonging to Pleosporales, Diaporthales, Glomerellales, Hypocreales, and Xylariales were the most abundant. These collections are being used for several complementary researches, including screening of isolates with novel bioactive compounds or conferring drought stress resistance, phylogenetic and genomic study. Genome sequencing was performed for 3 isolates, one Xylaria sp. strain JS573 producing griseofulvin, an antifungal compound, and two Fusarium spp. strains JS626 and JS1030, which are assumed to be new species found in Korea. More detailed analysis on these genomes will be presented. These collections and genome informations will serve as invaluable resources for identifying novel bioactive materials in addition to expand our knowledge on fungal biodiversity.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.31-34
• /
• 2003

Bi-2223 superconducting wires with 55 filaments were fabricated by stacking, drawing process with different heat-treatment histories. Two kinds of powders were prepared. One was pre-annealed at 760-820 $^{\circ}C$ and low oxygen partial pressure, and the other was only calcined state. Before rolling process, round wires were pre-annealed at 760 -820 $^{\circ}C$ and in a low oxygen partial pressure. We confirmed that pre-annealing step was to transform Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases at superconducting wire. However Bi-2223 phases were formed at higher pre-annealing temperature. Bi-2223 conductor was needed frequently annealing at low temperature because pre-annealing at precursor powder brought about decrease in workability. We could achieve highest Je of 6500 A/$\textrm{cm}^2$ at the tape using Bi-2212 orthorhombic phase by introduced slightly overheating at the 1st sintering process.

• 한국학교수학회논문집
• /
• 제14권4호
• /
• pp.423-442
• /
• 2011

연구의 목적은 ICME(2008,Mexico) 모델링 TSG21에서 논의한 모델일의 두 과제 설정 MMa, MeA이 학교수학에 효율적으로 적용이 될 수 있는지를 알아보는데 있다. 이 실험에서 수학과 교육과정에 적용할 수 있는 몇 가지 중요한 점을 발견했는데, 첫째는 MMa집단이 통제집단 IPS에 모델링 문항에서 성취도에 우의미한 차이를 보였고, 정보처리 문항에서도 좋은 성취수준을 보였다. 다시 말하면 모델링 MMa, MeA 교육이 가능하게 현행 학교 문제 해결 또는 개념 학습에 포함이 되고 더욱 발전 되는 시스템을 가질 수 있다. 둘째는 실험집단의 학생들이 생성한 모델링 처음 3단계 상황분석, 수학질문 구성, 모델설정에서 독특한 발견전략을 사용하였고 후반 2단계에서도 전통적 IPS 문제해결과 좋은 연결성을 보였다. 또, 실험집단 MMa, MeA 학생들이 개념적 시스템의 구성과정을 잘 이해했으며 Lesh & Sriraman(2005a, 2005b)의 개념적 시스템의 구성을 뒷받침 해 주었다. 셋째는 과제설정 MMa, MeA 간에 모델링의 사고행동인 수학적 상황 센스를 만들기(S), 창조하기(C), 확장하기(E), 재정의하기(RF)가 교실에서 활발하게 일어났다는 점이다. 따라서 Pollak등이 제언한 모델링 활동은 현행 IPS 활동과 의미 있게 교류 될 수 있다.