• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2015

For the special usage, the effort of developing AlN single crystals has been very hot in the world. The AlN-base UV LEDs are used on the field of sterilization, purification, curing and analyzing, which can advance human's living and medical processes etc.. AlN single crystals were grown by the PVT (Physical vapor transport) method. On the growing process, carbon crucibles with three different types such as normal size, taller than normal and wider than normal were used for comparison. The processing temperature was in the range of $1900{\sim}2100^{\circ}C$ and ambient pressure was 200~1 Torr. When the taller crucible was used, the sublimation mass was greater than normal dimension one but the best condition of growth changes widely. However the wider one gave much sublimation mass and growing condition was more stable than normal dimension. On limited growing furnace system, the changes of crucible dimension of PVT method provide the change of best condition for growth rate, as-grown crystal quality and growth condition stability.

• Design Convergence Study
• /
• v.17 no.1
• /
• pp.17-28
• /
• 2018

The manipulation of the device by hand while driving is a major factor to increase the risk of accidents, and the design of in-vehicle voice conversational interface that can compensate for this is being actively researched. The purpose of this study is to investigate the effect of the use of the barge-in function of in-vehicle voice interface on user experience. Participants were asked to carry out two tasks, one for navigation and one for music play. We conducted a survey to measure the functional user 's experience after each participant' s tasks, and measured usefulness, usability, satisfaction, and emotion as user experience factors. As a result, Barge-in has been rated as the better choice for most experience factors. There was a significant effect on usability dimension in navigation task and significant effects on usability dimension and emotional dimension in music play task. So it was found that barge-in function had a positive effect on actual user's usability and emotional dimension.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.17-27
• /
• 1995

The tact switch is widely used in electric and electronic products. The dome type tact spring is produced by stamping. Stamping of the tact spring and operation of the tact switch have been simulated by the elasto-plastic finite element method. The operating characteristics of the switch may be given by the relation between the operating force and stroke. For a given material, this is affected by two main factors. One is the geometry of dome spring which is determined by the geometry of stamping dies and the stamping pressure, and another one is the dimension of switch. From the calculation, it was possible to obtain the stamping conditions and switch dimension for a predetermined force-stroki relation And, the hoop stresses and effective strains distributions due to the stamping and during the operation of the switch indicate a possibility of cracking in the center and rim of dome spring.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.6
• /
• pp.1891-1908
• /
• 2018

In this paper, we investigate the existence of an S-shaped connected component in the set of positive solutions of the Dirichlet problem of the one-dimension Minkowski-curvature equation $$\{\(\frac{u^{\prime}}{\sqrt{1-u^{{\prime}2}}}\)^{\prime}+{\lambda}a(x)f(u)=0,\;x{\in}(0,1),\\u(0)=u(1)=0$$, where ${\lambda}$ is a positive parameter, $f{\in}C[0,{\infty})$, $a{\in}C[0,1]$. The proofs of main results are based upon the bifurcation techniques.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1367-1371
• /
• 2004

In this paper, we propose a method and condition of locating the position of an object in one dimension by using the phase difference of arrival(PDOA), To get a phase difference, the comparator of a wayside radio station(WRS) compares the reference signal with the received signal, Therefore, we can locate the position of a moving object. Finally, by using the simulation of a computer we analyze their values.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.67-67
• /
• 2010

PV module has many power loss factor in the site. Among them, one thing is series resistance. Especially interconnection ribbon resistance is one of the power loss. In this paper, we study interconnection ribbon resistance of the PV module material. In the field, high temperature can pile ribbon resistance on the PV modules. We can do better choice in the optimum use of ribbon through checking relation of ribbon dimension and resistivity. From this point of view, different solder type and dimension was treated.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1144-1148
• /
• 1997

In this paper, a method for the daily maximum load forecasting which uses a chaotic time series in power system and artificial neural network. We find the characteristics of chaos in power load curve and then determine a optimal embedding dimension and delay time. For the load forecast of one day ahead daily maximum power, we use the time series load data obtained in previous year. By using of embedding dimension and delay time, we construct a strange attractor in pseudo phase plane and the artificial neural network model trained with the attractor mentioned above. The one day ahead forecast errors are about 1.4% for absolute percentage average error.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.578-580
• /
• 1995

In this paper, a method for the daily maximum load forecasting which uses a chaotic time series in power system and artificial neural network. We find the characteristics of chaos in power load curve and then determine a optimal embedding dimension and delay time, For the load forecast of one day ahead daily maximum power, we use the time series load data obtained in previous year. By using of embedding dimension and delay time, we construct a strange attractor in pseudo phase plane and the artificial neural network model trained with the attractor font mentioned above. The one day ahead forecast errors are about 1.4% of absolute percentage average error.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.835-837
• /
• 1996

In this paper, a method for the daily maximum load forecasting which uses a chaotic time series in power system and artificial neural network(Back-propagation) is proposed. We find the characteristics of chaos in power load curve and then determine a optimal embedding dimension and delay time. For the load forecast of one day ahead daily maximum power, we use the time series load data obtained in previous year. By using of embedding dimension and delay time, we construct a strange attractor in pseudo phase plane and the artificial neural network model trained with the attractor mentioned above. The one day ahead forecast errors are about 1.4% for absolute percentage average error.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.436-437
• /
• 2005

3-dimension object's feature measurement is used several industrial field to produce for examination of demanded high quality products by using optical measurement method. 3-dimension object's feature measurement is separated surface scanning and surface non-scanning. In this research, we illuminated interfero-pattern to object, it was constructed with Michelson interferometer by using laser is one of surface non-scanning method. And we extracted phase-map, it is one of featural measurement analysis of 3-dimensional object by using a phase shifting theory.