• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.201-201
• /
• 2010

볼로미터 제작 공정 중 One step via 공정 시 via hole 모양에 의해 정기적 연결 및 구조적 안정성에 문제를 해결하기 위하여 다른 via 식각 방식으로 공정을 진행하였으며 그에 따른 via 공정 차이에 대한 결과를 연구하였다.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1174-1176
• /
• 1996

• Journal of Electrochemical Science and Technology
• /
• v.14 no.3
• /
• pp.293-300
• /
• 2023

The global energy storage markets have gravitated to high-energy-density and low cost of lithium-ion batteries (LIBs) as the predominant system for energy storage such as electric vehicles (EVs). High-Ni layered oxides are considered promising next-generation cathode materials for LIBs owing to their significant advantages in terms of high energy density. However, the practical application of high-Ni cathodes remains challenging, because of their structural and surface instability. Although extensive studies have been conducted to mitigate these inherent instabilities, a two-step process involving the synthesis of the cathode and a dry/wet coating is essential. This study evaluates a one-step β-Li₂SnO₃ layer coating on the surface of LiNi_0.8Co_0.2O₂ (NC82) via the thermal segregation of Sn owing to the solubility limit with respect to the synthesis temperature. The doping, segregation, and phase transition of Sn were systematically revealed by structural analyses. Moreover, surface-engineered 5 mol% Sn-coated LiNi_0.8Co_0.2O₂ (NC82_Sn5%) exhibited superior capacity retention compared to bare NC82 owing to the stable surface coating layer. Thus, the developed one-step coating method is suitable for improving the properties of high-Ni layered oxide cathode materials for application in LIBs.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2491-2495
• /
• 2008

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.342-356
• /
• 2009

This paper presents a vote decision-based deinterlacing scheme for false directional error correction(VDD) to convert interlaced signal into non-interlaced signal using only one fields. The VDD using the vote decision goes through four steps process. The first step extracts regions having doubt of false edge using MM-ELA method. In these regions, the edge direction is decided by the majority vote using upper adjacent pixels's information through the second step. But, we still have undecided directions, which will be decided by the majority vote and the directional average decision at the third step. This step preserves the edge directions and minimizes visual degradation. Finally, the last step interpolates undecided pixels using DOI method which can consider the fine edge direction. Although the VDD with hierarchical structure has a high complexity, it can extract delicate edge compared to other pixel-by-pixel or window-by-window deinterlacing algorithms. Simulation results show that it has significantly improved both the subjective and objective qualities of the reconstructed images.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1438-1445
• /
• 2015

A new DC-DC power converter is researched for renewable energy and battery hybrid power supplies systems in this paper. At the charging mode, a renewable energy source provides energy to charge a battery via the proposed converter. The operating principle of the proposed converter is the same as the conventional DC-DC buck converter. At the discharging mode, the battery releases its energy to the DC bus via the proposed converter. The proposed converter is a non-isolated high step-up DC-DC converter. The coupled-inductor technique is used to achieve a high step-up voltage gain by adjusting the turns ratio. Moreover, the leakage-inductor energies of the primary and secondary windings can be recycled. Thus, the conversion efficiency can be improved. Therefore, only one power converter is utilized at the charging or discharging modes. Finally, a prototype circuit is implemented to verify the performance of the proposed converter.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.6
• /
• pp.223-226
• /
• 1984

(Z)-13-Eicosen-10-one (1), one of the active components of the female pheromone of the peach fruit moth, Carposina niponensis Walsingham, was synthesized from 2-nonanone, succinic anhydride, and n-nonyllithium. The key step involves the preparation of 13-eicosyn-10-one from an epoxyketone via Eschenmoser cleavage.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2451-2454
• /
• 2013

Poly(methyl methacrylate) coated $BaF_2:Er^{3+}$ nanoparticles were prepared via a novel reverse-emulsion polymerization process using methyl methacrylate as continuous phase and water as dispersed phase. Preparation and coating of $BaF_2:Er^{3+}$ particles were processed in a single step. The resulting polymeric composites show the characteristic $Er^{3+}$ luminescence at excitation of 980 nm and may have potential applications in amplified optical networks.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.7
• /
• pp.1021-1022
• /
• 2002

• Communications for Statistical Applications and Methods
• /
• v.27 no.2
• /
• pp.177-187
• /
• 2020

This article is concerned with the issue of forecasting and evaluation of threshold-asymmetric volatility models for time series of count data. In particular, threshold integer-valued models with conditional Poisson and conditional negative binomial distributions are highlighted. Based on the parametric bootstrap method, some evaluation measures are discussed in terms of one-step ahead forecasting. A parametric bootstrap procedure is explained from which directional measure, magnitude measure and expected cost of misclassification are discussed to evaluate competing models. The cholera data in Bangladesh from 1988 to 2016 is analyzed as a real application.