• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.140-143
• /
• 2008

In this study, it was studied about the improved road light design for drivers and pedestrians using ray- or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good mad light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and Pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. Finally, we suggested reflector design for 250 watts power consumption CDM light source.

• 한국도로학회논문집
• /
• 제12권1호
• /
• pp.71-78
• /
• 2010

급격한 도시화는 교통지체를 포함하여 다양한 교통문제를 유발하였다. 따라서 도로건설, 교통소통 위주의 정책을 통해 교통지체 문제를 해결하기 위해 노력하였다. 그러나 차량중심의 교통소통 정책의 한계를 인식하고 최근에는 인간중심의 녹색교통 정책으로 전환 되고 있다. 도로다이어트는 이러한 녹색교통의 하나로 추진되고 있는 개념이다. 도로다이어트는 차로수, 차로폭 등을 줄여서 확보된 공간에 자전거도로, 보행자를 위한 쾌적한 보행로 등 녹색교통을 위한 공간으로 활용하고자 하는 방법이다. 도로다이어트는 최근에 도이된 개념으로 아직 구체적이고 실증적인 연구가 많이 수행되지 못하고 있는 실정이다. 따라서 본 연구에서는 도로다이어트를 위한 차로폭 축소 방안에 대한 기초적이고 실증적인 연구를 수행하였다. 현장조사를 통해 차로를 주행하는 차량의 차로중심선에서 이격량을 분석하여 차량이 주행시에 필요로 하는 최소한의 차로폭을 분석하였다. 분석결과 소형차의 경우 조사지점별로 2.34~2.70m, 대형차의 경우에는 2.62~2.89m의 차로폭이 필요한 것으로 나타나 도로다이어트 등 설계자의 목적에 따라 차로폭을 다소 축소할 수 있도록 설계기준을 완벽할 필요가 있을 것으로 판단된다. 본 연구결과는 도로다이어트, 도로공사 등으로 인해 동행이 가능한 도록폭이 축소되었을 때 차로폭 축소를 위한 설계기준으로 활용될 수 있을 것이다.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.83-90
• /
• 2017

PURPOSES : In this study, systematic road snow-removal capabilities were estimated based on previous historical data for road-snowremoval works. The final results can be used to aid decision-making strategies for cost-effective snow-removal works by regional offices. METHODS : First, road snow-removal historical data from the road snow-removal management system (RSMS), operated by the Ministry of Land, Infrastructure and Transport, were employed to determine specific characteristics of the snow-removal capabilities by region. The actual owned amount and actual used amount of infrastructure were analyzed for the past three years. Second, the regional offices were classified using K-means clustering into groups "close" to one another. Actual used snow-removal infrastructure was determined from the number of snow-removal working days. Finally, the correlation between the de-icing materials used and infrastructure was analyzed. Significant differences were found among the amounts of used infrastructure depending on snowfall intensity for each regional office during the past three years. RESULTS:The results showed that the amount of snow-removal infrastructure used for low heavy-snowfall intensity did not appear to depend on the amount of heavy snowfall, and therefore, high variation is observed in each area. CONCLUSIONS:This implies that the final analysis results will be useful when making decisions on snow-removal works.

• Spatial Information Research
• /
• 제17권2호
• /
• pp.213-222
• /
• 2009

배타적 최근접 쌍 검색 방법은 가까이 있는 승객과 택시 간에 쌍을 맺어주는 것과 같은 실 생활 응용 분야에 유용하게 쓰일 수 있으나, 그 중요성에 비해 많은 연구가 진행되지 않았다. 두 이동 객체가 배타적으로 최근접 쌍이 되기 위해서는 객체는 반드시 하나의 결과 쌍에 속해야 한다. 하지만, 이동 객체는 위치가 빈번하게 변하기 때문에 초기의 배타적 최근접 쌍 결과를 모니터링 해 줄 필요가 있다. 본 논문에서는 도로 네트워크를 기반으로 k 개의 배타적 최근접 쌍을 구하고 그 결과를 모니터링 하기 위한 방법을 제안한다. 제안하는 방법은 모든 객체에 대해 배타적 최근접 쌍 검색을 재수행하지 않고, 결과가 갱신되는 범위를 제한하여 부분적인 재수행을 함으로써 모니터링 수행 시간을 줄였다. 다양한 실제 도로 네트워크를 이용한 실험들을 통해 본 논문에서 제안하는 모니터링 방법의 성능을 측정하였다. 실험 결과는 본 논문에서 제안하는 모니터링 방법의 정확도가 일반적인 일괄처리 방법들에 비해 뛰어남을 보인다.

• Spatial Information Research
• /
• 제15권3호
• /
• pp.335-346
• /
• 2007

도로표지는 도로이용자의 편의제공을 목적으로 설치된 도로부속시설물 중의 하나이다. 도로표지의 타 시설물과 차이점은 관련규정에 의거한 표지 위치정보의 설정과 표지내 안내지명, 노선번호, 상징그림, 방위표기, 이정거리 등 다양한 속성정보를 포함하고 있어 정보화에 상대적으로 유리하다는 장점이 있다. 현재, 전국의 각급 도로상에 13만 여개의 도로표지가 설치되어 있으며, 280여개의 도로관리청이 각각 독립적으로 도로표지를 관리해 오고 있으나, 일관성, 시인성, 연계성, 위치적합성 등이 결여된 채 비효율적으로 관리되어 왔다. 이는 도로이용자로 하여금 많은 민원사항을 발생시키고 편의제공보다는 오히려 혼돈을 야기시킨 주요 원인으로 작용하였다. 이에 본 연구에서는 이와 같은 문제점을 개선하기 위하여 전국 도로표지에 대한 정보를 DB화하여 Web GIS 기반의 도로표지 관리시스템을 구축하였다. 본 연구에서 개발된 시스템에서는 도로표지 담당자 및 이용자들의 요구사항을 고려하여 시스템 설계에 반영하였으며, 본 시스템은 관리자측면에서의 업무 효율성 증진은 물론 대국민 도로표지 불편사항을 효과적으로 개선할 수 있을 것이다.

• 한국물환경학회지
• /
• 제37권2호
• /
• pp.103-113
• /
• 2021

In this study, an Excel-based model (ROADMOD) was developed to estimate pollutant loading from the road and evaluate BMPs. ROADMOD employs the Chezy-Manning equation and empirical expression for estimating surface runoff, and power function for pollutant buildup, and exponential function for pollutant washoff in SWMM. The results of model calibration for buildup and washoff using observed data revealed a good match between the simulation results and the observed data. The long-term surface runoff and sediment simulated by ROADMOD demonstrated a good match with those by SWMM with 2 ~ 14% of relative error. The shorter sweeping interval (within 8 days) remarkably decreased sediment loads from the road. It was found that the effect of reducing sediment loads from the road was greatly affected not only by the sweeping interval but also by sweeping on the day before a rainfall event. The 48% of removal efficiency of sediment loads from the road was achieved with 26 times of road sweeping per year when sweeping was performed on the day before the rainfall event. A 4-day sweeping interval showed similar removal efficiency (48%) with 96 times of sweeping per year. It is considered that the road sweeping on the day before a rainfall event could maximize the effect of reducing the non-point source pollution from the road with minimization of the number of road sweeping. So, the road sweeping on the day before a rainfall event can be considered as one of the useful and best management practices (BMPs) on road.

• Acta Via Serica
• /
• 제3권2호
• /
• pp.91-106
• /
• 2018

During the Old Uighur period, many works were translated into Old Uighur under the influence of Buddhism. Among these works, literary works such as $Da{\acute{s}}akarmapath{\bar{a}}vad{\bar{a}}nam{\bar{a}}l{\bar{a}}$ hold an important place. These works were usually translated from Pali to Sanskrit, from Sanskrit to Sogdian, Tocharian and Chinese, and to Old Uighur from these languages. These works which were added to the Old Uighur repertoire by translation indicate that different peoples along the ancient Silk Road had deep linguistic interactions with one another. Aside from these works, other narratives that we have been so far unable to determine whether they were translations, adaptations or original works have also been discovered. The Tale of King Chashtana, which was found in the work titled $Da{\acute{s}}akarmapath{\bar{a}}vad{\bar{a}}nam{\bar{a}}l{\bar{a}}$, is one of the tales we have been unable to classify as a translation or an original work. This tale has never been discovered with this title or this content in the languages of any of the peoples that were exposed to Buddhism along the Silk Road. On the other hand, the person whom the protagonist of this tale was named after has a very important place in the history of India, one of the countries that the Silk Road goes through. Saka Mahakshatrapa Chashtana (or Cashtana), a contemporary of Nahapana, declared himself king in Gujarat. A short time later, Chashtana, having invaded Ujjain and Maharashtra, established a powerful Saka kingdom in the west of India. His descendants reigned in the region for a long time. Another important fact about Chashtana is that coinage minted in his name was used all along the Silk Road. Chashtana, who became a significant historical figure in north western India, inspired the name of the protagonist of a tale in Old Uighur. That it is probable that the tale of King Chashtana is an original Old Uighur tale and not found in any other languages of the Silk Road brings some questions to mind: Who is Chashtana, the hero of the story? Is he related to the Saka king Chashtana in any way? What sort of influence did Chashtana have on the Silk Road and its languages? If this tale which we have never encountered in any other language of the Silk Road is indeed an original tale, why did the Old Uighurs use the name of an important Saka ruler? Is Saka-Uighur contact in question, given tales of this kind? What can we say about the historical and cultural geography of the Silk Road, given the fact that coinage was minted in his name and used along the Silk Road? In this study, I will attempt to answer these questions and share the information we have gleaned about Chashtana the hero of the tale and the Saka king Chashtana. One of the main aim of this study is to reveal the relationship between the narrative hero Chashtana and the Saka king Chashtana according to this information. Another aim of this study is to understand the history of the Saka, the Uighur and the Silk Road and to reveal the relationship between these three important subjects of history. The importance of the Silk Road will be emphasized again with the understanding of these relations. In this way, new information about Chashtana, who is an important name in the history of the India and the Silk Road, will be put forward. The history of the Sakas will be viewed from a different perspective through the Old Uighur Buddhist story.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.60-70
• /
• 1999

In this study, the computer code for the optimal design of road tunnel ventilation system based on one-dimensional analysis of the air flow was developed. The control volume method was used to calculate the air velocities and the concentration distribution of pollutants(CO, NOx, Particulate) for various tunnel ventilation system. This code was validated by comparing the calculation results to the practical design data for the road tunnel ventilation system. The calculation results were in accord with the practical design data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.35.4-35
• /
• 2001

Image detection system for road traffic data analysis is a real time detection system using image processing techniques to get the real-time traffic information which is used for traffic control and analysis. One of the most important functions in this system is to match the coordinates of real world and that of image on video camera. When there in no way to know the exact position of camera and it´s height from the object. If some points on the road of real world are known it is possible to calculate the coordinates of real world from image.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.178-180
• /
• 2006

In general, camera calibration has to be gone ahead necessarily to estimate a position and an orientation of the object exactly using a camera. Autonomous land system in order to run a vehicle autonomously needs a camera calibration method appling a camera and various road environment. Camera calibration is to prescribe the confrontation relation between third dimension space and the image plane. It means to find camera calibration parameters. Camera calibration parameters using the paved road and the unpaved road are estimated. The proposed algorithm has been detected through the image processing after obtaining the paved road and the unpaved road. There is able to detect easily edges because the road lanes exist in the raved road. Image processing method is two. One is a method on the paved road. Image is segmentalized using open, dilation, and erosion. The other is a method on the unpaved road. Edges are detected using blur and sharpening. So it has been made use of Hough transformation in order to detect the correct straight line because it has less error than least-square method. In addition to, this thesis has been used vanishing point' principle. an algorithm suggests camera calibration method using Hough transformation and vanishing point. When the algorithm was applied, the result of focal length was about 10.7[mm] and RMS errors of rotation were 0.10913 and 0.11476 ranges. these have the stabilized ranges comparatively. This shows that this algorithm can be applied to camera calibration on the raved and unpaved road.