• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.28-33
• /
• 2003

This study is performed to evaluate and design the dynamic characteristics of the onboard machinery with resilient mounts. To avoid resonance with onboard machinery and external force, it is necessary to calculate natural frequencies of the resilient mounting system more accurately. Natural frequencies of on board machinery are determined by rigid body properties(mass, moment of inertia, center of mass) of machinery and stiffness of mounts. But it is very difficult to calculate rigid body properties theoretically. And stiffness properties of rubber mounts vary with dynamic displacement, pre load, frequency and temperature, and so on. In this study, we have identified rigid body properties using experimental modal analysis and estimated dynamic stiffness of rubber mount for onboard machinery using measured vibration response during seatrial. We measured displacement excitation through deck under mounts and evaluated relationship between modes of resilient mounting system and main excitation sources of a ship.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.155-160
• /
• 2001

This study is performed to evaluate and design the vibration characteristics of the onboard machinery with resilient mountings. To reduce the vibration level of onboard machinery with resilient mountings, it is important to evaluate and, if necessary, modify the vibration characteristics of the resilient mountings. In this study, we have developed a program to calculate natural frequencies of the machinery with resilient mountings, forced vibration levels due to internal excitation force of the machinery itself and external excitation forces. of the main engine and the propeller. and the force and motion transmissibility of the resilient mountings. The developed program is also able to be applied to optimal design of the resilient mountings for obtaining a target natural frequency and for achieving a minimum forced vibration level at the center of gravity of the machinery.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.73-81
• /
• 2002

일반적으로, 선박에 탑재되는 장비의 진동문제는 장비자체의 기진력에 의한 진동문제뿐만 아니라 외부기진력인 주기관과 추진기의 기진력이 장비하부 데크를 통하여 장비에 과도 진동을 유발하는 경우가 많다. 따라서 본 연구에서는, 선박에 탑재되는 장비 마운팅 시스템의 진동 성능을 평가할 수 있도록 고유진동해석, 전달율계산, 강제진동해석 등을 수행할 수 있는 프로그램을 개발하였고, 선내 주요기진원과 장비의 공진시 공진회피를 위한 마운트 설계 변경 프로그램과, 그리고 장비 마운트 하부데크의 진동에 의한 장비의 무게중심에서 속도응답이 최소가 되도록, 마운트 강성을 결정하는 최적화 프로그램을 개발하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1067-1072
• /
• 2001

In this study, the vibration diagnosis program for onboard machinery has been developed. The developed program includes signal monitoring module, system diagnosis module, and system modification module. The signal monitoring module is to monitor the vibration signal in time and frequency domains. And the system diagnosis module, which is developed by using Neural Network with error back propagation algorithm, can detect the abnormal symptom indicating the malfunction of the machinery onboard ships. The investigations of the developed system are presented through the experiment using Rotor Kit. Abnormal vibration signals are created by adding additional weight, manually misaligning the shaft, and loosening the bolts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.198-200
• /
• 2009

This paper presents the numerical simulation results on the moving type electrodynamic suspension (EDS) simulator. Superconducting EDS system is generated by the interaction between the magnetic field made by the induced the eddy current in the ground conductor and the moving magnetic field made by onboard superconducting magnet. The levitation force of EDS system, which is proportional to the strength of the moving magnetic field, becomes saturated according to the increase of the velocity Especially, the levitation force is influenced by the structure of HTS magnet and ground conductor. The 3-D numerical analysis with FEM was used to find the distribution of the magnetic field, the optimal coil structure, and the calculation of the levitation force.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.457-463
• /
• 2019

Damage control is a very important preliminary and primary activity to improve the survivability of naval ships by preventing spread of damage, and various types of onboard damage control training are conducted regularly on naval ships. The scenarios for these trainings should be well organized to improve the training efficiency. However, at present, it takes much time and effort to generate the training scenarios and there is a problem that the procedures and contents of the scenarios vary widely depending on the persons who generate, without the established methods and standards. In this paper, an efficient generation method of damage control onboard training scenarios has been established, especially for flood and fire o n naval ships. Also a computer program has been developed based on the established method. The results showed that this method and computer program reduce the time and effort to generate these scenarios, and it is hoped that the method be used as a ROK Navy Standard.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.460-476
• /
• 2012

High-speed crafts suffer from losing a huge amount of their machinery energy in the form of heat loss with the exhaust gases. This will surely increase the annual operating cost of this type of ships and an adverse effect on the environment. This paper introduces a suggestion that may contribute to overcoming such problems. It presents the possibility of reusing the energy lost by the ships' exhaust gases as heating source for an absorption air condition unit onboard high-speed crafts. As a numerical example; the proposed method was investigated at a high-speed craft operating in Red Sea between Egypt and the Kingdom of Saudi Arabia. The results obtained are very satisfactory. It showed the possibility of providing the required ship's air condition cooling load during sailing and in port. Economically, this will reduce the annual ship's operating cost. Moreover, it will achieve a valuable reduction of ship's emissions.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.550-555
• /
• 2007

This paper introduces the mechanical vibration-measurements of vibration on ships(ISO 20283). Regulations and guidelines for vibration of hull structures, propulsion machinery and onboard equipments on ship were established mainly by classification societies or International Association of Classification Societies(IACS). The initial draft of ISO 20283 was proposed by USA and based on US military standards. Though these are not suitable to passenger and merchant ships, many experts have felt the need of the ISO regulation for the vibration measurement on ship. Hence, these standards are re-drafted and reviewed by particulate ISO members. In this paper, authors introduce the important agendas and the controversial items during setup of ISO 20283.

• 한국군사과학기술학회지
• /
• 제6권2호
• /
• pp.20-34
• /
• 2003

The good sea-keeping capability of the SWATH(Small Waterplane Area Twin Hull) ship has been attractive for research or surveillance vessels. Especially, for the naval ships accomplishing the underwater acoustic missions, it is necessary to access and minimize the underwater radiated noise level generated by the ships. Therefore, acoustic signature management and control are very important topics for these vessels. Underwater radiation pattern in the low frequency range is dominated by the tonals from the vibration of onboard machinery. In this work, the radiated noise level generated by the propulsion machine in the submerged hull is predicted using the transfer function technique and the hull transfer function for the submerged hull is determined by analyzing the longitudinal/circumferential stiffened infinitely long cylindrical shell and considering the empirical database of the previous vessels. It is confirmed that the transfer function technique can give useful information for identifying the noise source and estimating its contribution to the total radiatied noise level.