• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.164-167
• /
• 1996

This paper presents an off-line P.I.D parameter estimation method during normal operation in power plant. The process parameters are estimated using the recursive least square method. The controller parameters are estimated on the basis of desired characteristics of the dynamic model of the closed-loop control.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.427-438
• /
• 2001

Recently, Environmental Control Devices of Green House for Protected Cultivation is composed of on/off-type Controller to control each device using timer in equipment of intensive Labor. In case of system, it is difficult to grasp condition of the greenhouse about errors when this system has defect of a hardware, and it operates in the remote place or at night. In this paper, we developed a system that capable of replacing the existing control method of on/off with display panel in the greenhouse, monitoring data aquisition and status in the greenhouse using client computer based on internet. Also this system can communicate with each local greenhouse, and send alarm message about error. And we constructed web server to manage efficient informations for environmental control and corps cultivation in the greenhouse.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2005

On-off differential controller is one of the very important components which affect the system performance of the active solar thermal system. In this study, analyses were made regarding the influence of "on-off" setting temperature on the system efficiency and on the electrical consumption by circulation pump. This study was performed by experiment as well as the computer simulation using TRNSYS program. The simulation system was developed in this study was verified the its reliability by the experimental results. As a results, the turn off temperature(${\Delta}T_{off}$) is much more influence than the turn on temperature(${\Delta}T_{on}$) on the system efficiency. It is more clear and sensitivity in winter season. Finally the optimum on-off setting value and the system on-off pattern according to the several different kind of system was also represented.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.76-87
• /
• 1996

Energy analysis for the hot water heating control system of apartment house complex is accomplished by computer simulation. Mathematical model of a boiler, pipe network and a unit-house is developed. The effects of heating control methods on the heating performance and energy consumption of the system are investigated. The heating control methods considered in this study are a continuous heating control, and on-off heating control and an intermittent heating control methods. For each control method, the effects of an outdoor temperature, indoor temperature sensing position and the capacities of the boilers and circulating pumps on the heating performance and energy consumption are obtained and "the best" control method is recommended.commended.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.783-786
• /
• 1997

Automatic realization of on-off human decision making was derived based on a conditional probability. Following the proposed procedure, problems of insulator washing timing in power substations and spike detection on EEG(electroencephalogram) records were appropriately solved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.1-8
• /
• 2008

Recently, there is developing various ubiquitous application services using sensor networks based on TinyOS represented the operating system of sensor node. These sensor networks perform the collection and the transmission of sensing data from sensor node to get the context information. In this paper, we proposes the sensor node control algorithm which converts a sensor node to sleep, active, power off mode according to monitoring result of the voltage state of sensor node. Also, we designs and implement the sensor control module on server, sink, sensor node of sensor networks using this algorithm. It designs a sensor voltage control module of sensor node, data receive and display module of USN server using a java language and TinyOS. And, it checks the voltage state of sensor node, and it changes one of the sleep or power off modes in case of high voltage loss. Accordingly, we effectively use the power of sensor nodes as changing control modes of sensor nodes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.472-483
• /
• 1997

An experimental facility consisting of two $3{\times}4.4{\times}3.8m$ rooms identical in construction is built. Each room has a control system and storage tank supplying hot water to the radiant floor heating system. The facility enables simultaneous comparision of two different control stratigies each implemented in a separate room. The operating performance of three kinds of flow control scheme is tested and compared in this study : (i) conventional on-off control based on feedback from room air temperature (ii) TPSC(two parameter switching control) (iii) TPOC(two parameter on-off control). Results show that TPSC and TPOC using room air and surface temperature sequentially as feedback signal to control hot water supply is the better temperature regulation scheme than conventional control based on feedback from only room air temperature. They are good candidates for the room with radiant floor heating system under continuous and intermittent heating mode.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.7
• /
• pp.356-363
• /
• 2001

A SRG (Switched Reluctance Generator) has many advantages such as high efficiency, low cost, high-speed capability and robustness compared with other of machine. But the control methods that have been adopted for SRGs are complicated. This paper proposes a simple control method using the PID controller which only controls turn-off angles while keeping turn-on angles of SRG constant. In order to keep the output voltage constant, the turn-off angle for load variations is controlled by using linearity between the generated current and turn-off angle since the reference generated current can be led through the voltage errors between the reference and the actual voltage. The suggested control method enhances the robustness of this system and simplifies the hardware and software by using only the voltage and the speed sensors. The proposed method is verified by experiments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.102-115
• /
• 2016

In this study, a scheme of ramp metering that uses Off-ramp Exit Percentage instead of the O/D table required for systems of integrated control of ramps at the target freeway segment is presented. The segment from Gyeyang IC to Jangsu IC on the Seoul Outer Ring Expressway was selected for the study because the segment frequently shows large volume of traffic on the short distance between the two ICs requiring an integrated on-ramp control by taking the traffic situation on an entire expressway into account despite an unavailability of O/D data. Thus the information of Off-ramp Exit Percentage at each IC were collected instead of securing the O/D table through actual survey, and the congestion on the segment was analyzed to identify the validity of the use of off-ramp traffic instead of O/D data. In addition, the scheme of ramp metering that exploits the off-ramp traffic information was prepared through simulations conducted in a way supporting the traffic control for respective access roads thereof by taking traffic situations and queues on each ramp into account. The results obtained from the simulation analyses revealed an improved level of travel speed and traffic volume on the main line and validated the use of off-ramp traffic instead of the O/D table for the ramp metering.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.327-328
• /
• 2013

선풍기를 켜둔 채 잠시 자리를 비우거나 선풍기의 속도를 조절하고 싶은 경우가 자주 있다. 이 경우 선풍기가 가까이에 위치하는 경우는 문제가 없지만 벽걸이 형 선풍기 또는 선풍기가 사람 가까이에 위치하지 않는 경우, 선풍기의 속도 조절 또는 ON/OFF 제어를 위해 사용자가 불편함을 겪는 경우가 많다. 원격 제어장치가 추가로 제공되는 선풍기도 있지만 이 경우 원격제어장치를 가까이에 휴대하고 있어야 하는 불편함이 따른다. 그러나 스마트폰은 일반적으로 늘 가까이에 두고 있으므로 스마트폰을 이용하여 원격 제어 한다면 이런 문제가 해결될 것이다. 따라서 우리는 최근 많이 보급되고 있는 스마트폰을 이용하여 원격으로 쉽게 속도를 제어함과 동시에 초음파 센서를 이용하여 사람의 유무를 판단하여 선풍기의 ON/OFF를 자동으로 제어하여 절전도 할 수 있도록 장치와 스마트폰용 응용 프로그램을 개발하였다. 개발된 장치는 사용자 편의성이 높아짐과 동시에 전기도 절약되는 장점을 가진다.