• 전기학회논문지P
• /
• 제57권2호
• /
• pp.202-208
• /
• 2008

Condition monitoring technologies allow achieving this goal by minimizing downtime through the integrated planning and scheduling of repairs indicated by condition monitoring techniques. Thermal runaways induced by conduction problems deteriorate insulating material and cause disruptive dielectric discharges resulting in arcing faults. Therefore, having the ability to directly measure the temperature of the contacts while in service will provide more information to determine the true condition of the equipment. It allows connective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on -line condition monitoring of energized equipment is applicable both as stand alone system and with an interface for power quality monitoring system. The paper presents the results of wireless temperature monitoring: of electrical equipment at a power plant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1974-1975
• /
• 2007

Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on-line condition monitoring of energized equipment is applicable both as standalone system and with an interface with power quality monitoring system. The paper presents the results of wireless temperature monitoring of switchgear at a power plant over a two-year period.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1644-1646
• /
• 2003

This paper presents recent studies on the on-line insulation monitoring and diagnostic systems for transformers developed by HHI. Sufficiently high sensitivity and accuracy for practical use were achieved for the system, combined with communication networks to provide an on-line remote monitoring system. Several alarm criteria are formulated to enable a superimposed monitoring system to perform decisive action. The reasons for monitoring the condition and maintaining the health of electrical apparatus were discussed. The experience at the fields and the criteria for the judgment are also discussed in detail.

• 한국공작기계학회논문집
• /
• 제11권2호
• /
• pp.103-111
• /
• 2002

Out of all metal-cutting process, the hole-making process is the most widely used. It is estimated to be more than 30% of the total metal-cutting process. It is therefore desirable to monitor and detect drill wear during the hole-drilling process. One important aspect in controlling the drilling process is monitoring drill wear status. There are two systems, Basic system and Online system, to detect the drill wear. Basic system comprised of spindle rotational speed, feed rates, thrust torque and flank wear measured by tool microscope. Outline system comprised of spindle rotational speed feed rates, AE signal, flank wear area measured by computer vision, On-line monitoring system does not need to stop the process to inspect drill wear. Backpropagation neural networks (BPNs) were used for on-line detection of drill wear. The output was the drill wear state which was either usable or failure. This paper deals with an on-line drill wear monitoring system to fit the detection of the abnormal tool state.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.218-221
• /
• 2009

This paper reports on measurement method for the fiber optic strain monitoring of overhead contact line systems of trains, We used FBG (Fiber Bragg Grating) sensors to measure the strain variation of overhead contact line. FBG sensors can sensitively measure the variation of strain and! or temperature by the shift wavelength of reflected wave according to the lattice variation during the measurement. FBG sensor were attached on the contact line and connected to the monitoring system with optical fibers. The monitering system with FBG sensors showed very good sensitivity to measuring strain variation and this system could be applied to the overhead contact line of KTX (Korea Train eXpress).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1175-1178
• /
• 2004

On-line partial discharge(PD) monitoring system has been developed to monitor in operating large motor stator insulations. This system makes use of remote diagnosis techniques for the evaluation of PD activity in the control center of thermal power plant. This system can be remotely accessed via a modem to build database, analyze status and interpret the pattern of PD activity. A personnel computer is generally connected to ten motors to continuous measurement of the PD activity. The test data can be easily interpreted by a maintenance staff. For assessing the condition of stator winding in motors, this system ensures a reliable measurement and accurate estimation. Capacitive couplers used for on-line PD measurement have been 80pF. The maximum PD magnitude(Qmax), PD pattern and normalized quantity number(NQN) were performed by this system.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.295-299
• /
• 2010

항공기 추진시스템에 있어 내구성과 신뢰성을 향상과 운용비용 절감을 위한 상태감시 및 진단 시스템의 개발 및 적용이 일반화되고 있다. 특히 40,000ft 이상의 고고도에서 장시간 운용되는 무인항공기를 신뢰성 있게 운용하기 위해서는 열악한 환경에서 작동되는 추진시스템의 손상이나 성능저하에 대한 사전 대처를 위한 상태감시 시스템이 필수적으로 요구된다. 이에 본 연구에서는 MATLAB/SIMULINK를 이용하여 온라인 상태감시 프로그램을 제안하였다. 입력 모듈에서 현 개발단계에서는 실제 엔진 계측신호가 유용하지 않아 이를 모사하였다. 제안된 온라인 상태감시 모니터링 프로그램은 적용 가능성을 확인하기 위해 실제 터보프롭 엔진에 적용하였다.

• 한국추진공학회지
• /
• 제15권3호
• /
• pp.86-93
• /
• 2011

항공기 추진시스템에 있어 내구성과 신뢰성을 향상하고 운용비용 절감을 위한 상태감시 및 진단 시스템의 개발 및 적용이 일반화되고 있다. 특히, 높은 고도에서 장시간 운용되는 추진시스템의 손상이나 성능저하에 대한 사전 대처를 위한 상태감시 시스템이 요구된다. 본 연구에서는 LabVIEW를 이용하여 PT6A-67 터보프롭 엔진의 GUI기반 온라인 상태감시 프로그램을 제안하였다. 제안된 온라인 상태감시 프로그램은 기준엔진 성능시뮬레이션 프로그램과 온라인 통신을 통한 실제 엔진계측 데이터의 비교를 통한 추진시스템의 경향을 감시할 수 있는 상태감시 프로그램을 연구 및 개발하였다.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.115-121
• /
• 2011

Intelligent distribution equipment is inevitable to realize self-healing which is one of smart grid functions in distribution network. Therefore, most of distribution equipment have been developed with self diagnostic sensors. However, it is not effective to construct on-line monitoring system for underground distribution cable because of high cost and low sensitivity. Recently, optical fiber composite cable is being considered for communication and power delivery in order to cope with increasing communication in distribution network. This paper presents the design and performance assessment results of underground cable on-line monitoring system using DTS(Distributed Temperature Sensing) and optical fiber composite underground cable.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.241-246
• /
• 1986

본 연구에서는 산업 현장에 쉽게 적용할 수 있도록 측정과 설치가 용이한 용접 모재간에 가해지는 전압(weld voltage)파형에서 용접 변수를 구하고, 실험으로 구한 용접 강도와의 상관 관계로부터, 점용접 품질 감시체제를 개발하고자 한다. 전압 파형에서 용접 변수를 구하기 위하여 추계 모델링 기법을 적용하고, 구해진 모 델로부터 분산 해석(dispersion analysis)을 통하여 용접 변수를 찾으며, 동시에 전극 변위 곡선을 실험적으로 구하여서, 분산 해석 방법의 신뢰도를 검사 하고자 한다.