온도센서를 이용한 전력설비의 온라인 상태 감시

On-Line Condition Monitoring of Electrical Equipment Using Temperature Sensor

  • 발행 : 2008.06.01

초록

Condition monitoring technologies allow achieving this goal by minimizing downtime through the integrated planning and scheduling of repairs indicated by condition monitoring techniques. Thermal runaways induced by conduction problems deteriorate insulating material and cause disruptive dielectric discharges resulting in arcing faults. Therefore, having the ability to directly measure the temperature of the contacts while in service will provide more information to determine the true condition of the equipment. It allows connective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on -line condition monitoring of energized equipment is applicable both as stand alone system and with an interface for power quality monitoring system. The paper presents the results of wireless temperature monitoring: of electrical equipment at a power plant.

키워드

참고문헌

  1. Jeffrey H. Nelson. "Electric Utility Consideration for Circuit Breaker Monitoring", Proceedings of the 2001 IEEE/PES Transmission and Distribution Conference and Exposition, Oct 28-Nov 2, pp. 1094-1097 (2002)
  2. Denis Koch, Ruben Garson. "Square D Type FB4 SF6 Circuit Breaker Contact Resistance", Minutes of the Sixty-First Annual International Conference of Doble Clients, p. 5-6.1-5-6.19 (1994)
  3. Wayne W. Manges, Glenn O. Allgood, and Stephen F. Smith It's Time for Sensors to Go Wireless, Part 1, Technological Underprints, Sensors, April (1999)
  4. Glenn O. Allgood, Wayne W. Manges, and Stephen F. Smith. It's Time for Sensors to Go Wireless. Part II. Take a good technology and make it an economic success. Sensors, May, pp. 70-80 (1999)
  5. Wayne. W. Manges, Glenn O. Allgood, Stephen F. Smith, Timothy J. Mclntyre, and Michael R Moore, Eric Lightner. "Intelligent Wireless Sensors for Industrial Manufacturing, Sensors, April (2000)
  6. Christopher McLean and Dave Wolfe, Intelligent Wireless Condition-Based Maintenance, Sensors, June (2002)
  7. Darragh Maxwell and Russell Williamson. Wireless Temperature Monitoring in Remote Systems, Sensors, October (2002)