• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.8
• /
• pp.995-999
• /
• 2014

In this paper, a new size-reduction approach for branch-line coupler is introduced which uses parallel end-shorted coupled lines with lumped capacitors. The characteristic of the new design was analyzed using even-odd mode method, and simulated on HFSS before fabricated on the FR4 epoxy glass cloth copper-clad plat (CCL) PCB substrate at center frequency of 1 GHz. The electrical length of transmission line was reduced to 15 degrees, therefore the size of branch-line coupler was largely reduced approximately maintaining the same characteristic around the stable center frequency. The insertion loss of the branch-line coupler filter was -4.39 dB. The size of the overall hybrid is $20mm{\times}20mm$. Measurements results were well agreed with the simulated ones.

• Industrial Engineering and Management Systems
• /
• v.8 no.1
• /
• pp.47-53
• /
• 2009

We define product line (or mix) selection problem as selecting a subset of potential product variants that can simultaneously minimize product proliferation and maintain market coverage. Selecting the most efficient product mix is a complex problem, which requires analyses of multiple criteria. This paper proposes a method based on Data Envelopment Analysis (DEA) for product line selection. Data Envelopment Analysis (DEA) is a linear programming based technique commonly used for measuring the relative performance of a group of decision making units with multiple inputs and outputs. Although DEA has been proved to be an effective evaluation tool in many fields, it has not been applied to solve the product line selection problem. In this study, we construct a five-step method that systematically adopts DEA to solve a product line selection problem. We then apply the proposed method to an existing line of staplers to provide quantitative evidence for managers to generate desirable decisions to maximize the company profits while also fulfilling market demands.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1595-1598
• /
• 2002

최근 정보통신기술의 발달과 인터넷 이용의 폭발적인 성장에 따라 인터넷을 통한 전자 상거래가 새로운 경제 활동으로 등장과 동시에 off-line을 기반으로 하는 전자 상거래 시장이 급속한 성장을 하고 있다. 이에 따라 기존의 on-line 상의 전자 지불 방식을 보다 실용적인 off-line 상의 전자 지불 방식이 요구되고 있다. 전자 지불 방식의 하나인 전자 화폐는 효과적인 응용을 위해 실물 화폐와 유사한 여러 가지 성질을 갖고 있기는 하지만, 이러한 성질 중에서 사용자의 프라이버시를 보장하는 경우 발생하는 부정적인 문제 즉 돈 세탁, 약탈, 그리고 자금의 해외 유출의 용의 등을 문제점을 해결하기 위해 익명성 제어 익명성 취소 등의 다양한 프로토콜의 개발이 연구되고 있다. 이에 따라 본 논문에서는 off-line 상에서 전자상거래를 할 때 부정 사용자에 대한 사용자 추적, 즉 익명성 제어가 가능한 프로토콜을 제안한다. 제안한 프로토콜의 특징은 기존의 on-line 상의 시스템 구현의 효율성을 고려하여 RSA와 Hash 함수만을 사용하여 사용자 은닉이 가능하도록 하였으며, 또한 익명성 제어가 가능하지만 어느 기관 단독이 아는 은행과 인중기관이 협조 할 경우에만 추적이 가능하다.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.238-242
• /
• 2021

In this paper, we present an in line plastic-optical-fiber (POF) temperature sensor based on intensity modulation. The in line POF temperature sensor is composed of a POF, including an in-fiber micro hole filled with reversible thermochromic material, the transmittance of which depends on temperature. The reversible thermochromic material was cobalt chloride/polyvinyl butyral gel. A cobalt chloride solution of concentration 30.8 mM was formulated using 10% water/90% ethanol (v/v) solution, and gelled by dissolving polyvinyl butyral in this solution. Four types of in line POF sensors, with in line micro holes of four different diameters, were fabricated to measure temperature in the range of 25 to 75 ℃. The output optical power of all of these in line POF temperature sensors was inversely proportional to the temperature; the relation between output power and temperature was approximately linear, and the sensitivity was proportional to the diameter of the in-fiber micro hole. The experimental results indicate that an in line POF sensor can be used effectively for measuring moderate temperatures.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.4 no.1
• /
• pp.16-21
• /
• 2016

This study analyzed the successful case of Naver LINE's entry into the Japanese market. LINE pursued a strategy of establishing its dominance early on and implemented localization for Japan and thereby achieved success in the Japanese market. The various strategies adopted by LINE allowed it to win over 80% of the market share in Japan and function as a nationally ubiquitous mobile messenger. The conclusions to be drawn from our LINE analysis is that LINE must implement localization strategies suited to the characteristics of each country, as it had done successfully in Japan. In the Asian region, it should retain the platform that provides various contents while pursuing a localization strategy to secure competitive edge, by offering emoticons suitable for each country, such as Ramadan emoticons in Islamic regions.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.1-5
• /
• 2012

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1102-1103
• /
• 2015

The researchers worldwide have been trying to apply high temperature superconducting wire for power system devices. High voltage direct current (HVDC) transmission system has been used for bulk and long-distance power transmission. The authors designed a laboratory-scale superconducting DC transmission line to investigate its applicability to an HVDC system. The superconducting DC transmission line was simulated in connection to a laboratory-scale HVDC system using PSCAD/EMTDC. The operating characteristics of the superconducting DC transmission line connected to HVDC system and the effects of the superconducting DC transmission line on HVDC system were analyzed and compared with the results of a conventional DC transmission line. The results of operating characteristics for the superconducting DC transmission line were discussed in detail.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.115-119
• /
• 2008

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.715-718
• /
• 2009

The assembly line is one of the typical process hard to analyze with mathematical methods including even stochastic approaches, because it includes many manual operations varying drastically depending on operators' skills. In this paper, we suggest the simulation optimization method to design the optimal assembly line of a gas oven. To achieve the optimal design, firstly, we modeled the real gas oven assembly line with actual data, such as assembly procedures, operation rules, and other input parameters and so on. Secondly, we build some alternatives to enhance the line performance based on business rules and other parameters. The DOE(Design Of Experiment) techniques were used for testing alternatives under various situations. Each alternatives performed optimization process with evolution strategy; one of the GA(Genetic Algorithm) techniques. As a result, we can make about 7% of throughputs up with the same time and cost. By this process, we expect the assembly line can obtain the solution compatible with their own problems.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.33-38
• /
• 2005

It has been well documented that plate forming is one of the most important processes in shipbuilding. In the most shipyards, the line heating method is primarily used for plate forming. Since the heating process is carried out for the curved plate and not for the flat plate, a curvature effect on the final deformation must be considered in deriving the simplified prediction models for deformation. This paper investigates the effect of curvature along the heating line on the deformation of the plate. First of all, results of numerical analysis are compared with these of a line-heating test, to justify the elasto-plastic analysis procedure for the present study, which shows good agreement. Then, the present numerical procedure is applied to flat and curved plate models, to investigate the curvature effect on the heat transfer characteristics and deformation by line heating.