• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1075-1078
• /
• 2002

This paper describes on the design structure and development of temperature stable strip-line function isolator operating In above resonance mode. Temperature characteristics of isolator depend on magnet, YIG(Yttium Iron Garnet) ferrite, and conductor etc. These require temperature stability and possible methods of compensation for the temperature dependent effects. In this paper, the analysis and measurement of the temperature characteristics were carried out for the material isolator prototype. The bandwidth of isolator was expended and the frequency shift at center was reduced in the temperature range of -20∼80$\^{C}$.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1191-1191
• /
• 2001

Generation of precise, accurate, and robust calibration models for spectroscopic methods of analysis can be time-consuming, expensive, and sometimes difficult to achieve. For these reasons, efforts have been made to find ways in which the calibration from one instrument can be moved to another with minimal performance reduction. A slight shift in nomenclature from the common term calibration transfer to the term calibration transport is used here to help resolve the subtle difference between two means of moving a calibration from one instrument to another. The former term denotes a transfer procedure that includes mathematical manipulation of the calibration data via some determined transfer function, whereas the latter term does not. Todays generation of process and laboratory FTNIR analyzers is capable of not only achieving calibration transfer, but also calibration transport often without the need of slope or bias adjustments. Several studies are used to examine the boundaries of the extent to which calibration transport is achieved in the refining industry. Data collected on multiple on-line and laboratory FTNIR analyzers located in multiple countries are considered, and the ultimate limitations discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.2
• /
• pp.43-49
• /
• 2016

In this paper, we propose the controllability function and service design to efficiently implement the control of the disaster communication network, using Internet of Things(IoT) Technology. In accordance with the spread of Information Communication Technology(ICT), the era for building a disaster communications system without exclusion over the entire areas has emerged. National wireless mesh networks for public safety and disaster relief have been evolving to strengthen the pre-disaster response system using the latest technologies through the convergence of various technologies and services from the viewpoint of the command and control between disaster response agencies. In line with such a technological paradigm shift, the controllability of the objects in the IoT has been emerging as a key quality requirement of a disaster communications system. In this study, the objects are classified by the subject of control according to the IoT component, such as data, network resources and services in order to effectively implement their controllability. In addition, based on the destination of this controllability, technologies and services have been designed that can reduce the damage caused by disasters. Technologies and services that were derived from this study must be implemented in the current disaster safety network systems together with the establishment of an infrastructure for the networks in order that all persons are able to effectively utilize the disaster communications system for their safety.

• Therapeutic Science for Rehabilitation
• /
• v.6 no.2
• /
• pp.37-45
• /
• 2017

Background: The presence of visuospatial impairment can make patients slow functional recovery and impede the rehabilitation process in TBI patients. Objective: The aim of this study is to investigate effects of prism adaptation treatment for functional outcomes in patients following traumatic brain injury. Methods: The subject received prism adaptation treatment for 2 weeks additionally during traditional rehabilitation for 4 weeks. The Patient has prism adaptation treatment while wearing wedge prisms that shift the external environment about $12^{\circ}$ leftward. The patient received 10 sessions, 15-20min each session. Outcome measures were visuospatial deficit(line bisection, latter cancellation), Visual and spatial perception(LOTCA-visual perception and spatial perception), motor function of upper extremity(FMA U/E; Fugl-Meyer motor assessment upper extremity, ARAT; Action research arm test), balance(BBS; Berg Balance Scale), mobility(FAC; Functional ambulation classification) and functional level(FIM; Functional independent measure). All Assessments took place on study entry and post-treatment assessments were performed at discharge from the hospital. Results: After prism adaptation, the visuospatial impairment scores improved as indicated in the line bisection(-15.2 to -6.02), latter cancellation(2 to 0) and LOTCA- spatial perception scores(7 to 9). The upper motor function improved as indicated in the scores of affected FMA U/E(21 to 40) and ARAT(4 to 22). Ambulation and balance improved as indicated in the BBS scores(25 to 38) and FAC scores(0 to 4). ADL function improved as indicated in the FIM total scores 54 to 70(motor 34 to 61, cognition 20 to 29). Conclusion: Prism adaptation did improve functional level such as motor functions and ADL abilities in TBI patient. Further research is recommended.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.450-455
• /
• 1999

We present Photoluminescence (PL) and Atomic Force Microscopy (AFM) image on InAs quantum dots (QDs) having different size which grown by Molecualr Beam Epitaxy (MBE). For different size QDs, analysis of the AFM profiles show that the density of QDs was the maximum value $(1.1\times10^{11}\textrm{/cm}^2)$ at 2.0 ML. In the spectra of QDs, it is found that the peak energy decreases with increasing dot size due to the effect of quantum confinement. Temperature dependence of PL intensities show that the PL is quenching and Red shift as the temperature increase. The FWHM range of 20K~180K is narrowing with increasing temperature. When temperature is over 180K, the line-width starts to in creases with increasing temperature. At last, temperature dependence of the integrated intensities were fit using the Arrehenius-type function for the activation energy. Fit value of the activation energy was increased with increasing QDs-size.

• Journal of Magnetics
• /
• v.1 no.1
• /
• pp.14-18
• /
• 1996

The NMR spin echo in pure iron was measured as a function of external magnetic field up to 10 kgauss at room temperature. We observed the signal coming from a single domain formed over 7.5 kgauss which has not been detected in previous works. The resonance frequency shift with external field confirmed that the hyperfine field in iron is -330.2 kgauss. From the comparison of the magnetization curve with the domain wall signal and the resonance frequency in external field, we showed that NMR could give the useful qualitative information on the magnetization process. The extent of the internal strain removed by annealing, which can be hardly seen in hysteresis curves, was clearly shown up in the NMR line-width.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.7
• /
• pp.3116-3133
• /
• 2020

Based on the teleportation by quantum walk, a quantum secret sharing scheme with credible authentication is proposed. Using the Hash function and quantum local operation, combined with the two-step quantum walks circuit on the line, the identity authentication and the teleportation of the secret information in distribution phase are realized. Participants collaborate honestly to recover secret information based on particle measurement results, preventing untrusted agents and external attacks from obtaining useful information. Due to the application of quantum walk, the sender does not need to prepare the necessary entangled state in advance, simply encodes the information to be sent in the coin state, and applies the conditional shift operator between the coin space and the position space to produce the entangled state necessary for quantum teleportation. Security analysis shows that the protocol can effectively resist intercept/resend attacks, entanglement attacks, participant attacks, and impersonation attacks. In addition, the quantum walk circuit used has been implemented in many different physical systems and experiments, so this quantum secret sharing scheme may be achievable in the future.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.45-49
• /
• 2008

The cyclic polarisation technique was applied to determine the corrosion, primary-passivation, transpassive, and protection potential of AISI 316L stainless steels immersed in 3550-ppm NaCl solution containing sulfate in the content up to 3000 ppm. The solutions were kept constant at $27^{\circ}C$ and saturated by laboratory air. The solution pH was varied from 3 to 11. Each type of potentials was plotted in function of pH and linked as lines to determine the different zones in the constructed potential-pH diagram. The predominant regimes of the immunity, general corrosion, perfect passivation, imperfect passivation, and pitting corrosion were determined based on those lines of potentials. Comparing to the potential-pH diagram of specimens immersed in the aerated and deaerated 3550-ppm NaCl solutions, the addition of 3000-ppm $Na_2SO_4$ to these solutions increased the overall, perfect and imperfect, passivation regime by shifting the transpassive-potential line to the noble direction. However, it also widened the imperfect passivation area. The addition of $Na_2SO_4$ did not significantly affect the corrosion potential. It was found that the dissolved oxygen tends to negatively shift the transpassive-potential and protection-potential lines at all studied pH. The considerable effect of dissolved oxygen on corrosion and primary-passivation potentials could not be observed.

• BMB Reports
• /
• v.43 no.6
• /
• pp.438-444
• /
• 2010

Dnd (dead end) gene encodes an RNA binding protein and is specifically expressed in primordial germ cells (PGCs) as a vertebrate-specific component of the germ plasma throughout embryogenesis. By utilizing a technique of specific nucleic acids associated with proteins (SNAAP), 13 potential target mRNAs of zebrafish Dnd (ZDnd) protein were identified from 8-cell embryo, and 8 target mRNAs have been confirmed using an RT-PCR analysis. Of the target mRNAs, the present study is focused on the regulation of geminin, which is an inhibitor of DNA replication. Using electrophoretic mobility shift assay (EMSA), we demonstrated that ZDND protein bound the 67-nucleotide region from 864 to 931 in the 3'UTR of geminin mRNA, a sequence containing 60.29% of uridine. Results from a dual-luciferase assay in HEK293 cells showed that ZDND increases the translation of geminin. Taken together, the identification of target mRNA for ZDnd will be helpful to further explore the biological function of Dnd in zebrafish germ-line development as well as in cancer cells.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.174-180
• /
• 2012

In this study, the feasibility of spectral domain optical Doppler tomography for measuring blood flow characteristics in a micro-tube was demonstrated through several experiments. The use of an SD-ODT system in blood flow measurement can provide high resolution images (5 microns resolution). We prepared three capillary tubes to reveal the effect of different concentrations of hematocrit ratio (HR). One tube serves as the control. The two other tubes contained different concentrations of HR (5%, 25%). Three different capillary tube inlet flow velocities were tested in the present study. The Reynolds number (Re) which is based on the capillary tube inner diameter ranges from Re=6 to 48. We calculated a Doppler shift of the power spectrum of the temporal interference fringes with Kasai autocorrelation function to achieve the velocity profile of the flow. As a result, SD-ODT systems could not detect the cell depletion layer in the present study due to the limitation of spatial resolution. Nevertheless, these systems were proven to be capable of observing the RBCs of blood.