• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1091-1092
• /
• 2012

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.393-404
• /
• 2013

In order to improve the employment rate of graduates in maritime and fisheries high schools, we investigated the employment situations of the those graduates for the last 8 years. The results were as follows, The ratio of graduates in maritime and fisheries high schools to total graduates of on-board departments are 69.1% and 30.9% respectively. The on-board employment rate of maritime high schools and fisheries high schools graduates are 63.2% and 26.7% respectively. Nearly all of the maritime high schools students were employed to merchant ship and fisheries high schools students were employed to merchant ship 77.2% and only 22.8% of them got a job on fisheries ship. The ratio of getting a job in maritime high schools to ocean-going ship was 76.7%, that was the highest ratio and the ratio of fisheries high schools got a job to ocean-going ship was 55.1%. The on-board career of maritime high schools graduates was 1~5 years, which took 86.4% of all careers and that of fisheries high schools was less than 1 year, which took 60.0% of all careers. We should make the various efforts to improve the employment rate of getting job to fisheries ship in the fisheries high school graduates.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.779-785
• /
• 2011

In order to improve the employment rate of graduates in maritime and fisheries universities, we investigated the employment situations of the those graduates for the last 7 years. The results were as follows, The ratio of graduates in maritime and fisheries universities to total graduates of on-board departments are 69.1% and 30.9% respectively. The on-board employment rate of maritime universities and fisheries universities graduates are 63.2% and 26.7% respectively. Nearly all of the maritime universities students were employed to merchant ship and fisheries universities students were employed to merchant ship 77.2% and only 22.8% of them got a job on fisheries ship. The ratio of getting a job in maritime universities to ocean-going ship was 76.7%, that was the highest ratio and the ratio of fisheries universities got a job to ocean-going ship was 55.1%. The on-board career of maritime universities graduates was 1~5 years, which took 86.4% of all careers and that of fisheries universities was less than 1 year, which took 60.0% of all careers. We should make the various efforts to improve the employment rate of getting job to fisheries ship in the fisheries university gradustes.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.2
• /
• pp.99-108
• /
• 2023

This study's goal is to investigate the effects of board size, the number of annual board meetings, the profitability of the company, and the audit Committee on the disclosure of climate change in Saudi companies listed on the stock exchange. It was conducted to evaluate affecting some factors on carbon emissions by the regression model. The study uses the content analysis method. Data was collected from the annual and sustainability reports, and the platform database Refinitiv, an LSEG (London Stock Exchange Group Company) for the period 2018 to 2021. The study sample is 51 companies. The study findings showed Saudi Arabia saw its first significant overall drop in CO2 emissions with a 22.61 MtCO2 decline (3.93%) in 2018. The study revealed a positive connection between the size of the director's board, and the disclosure of carbon emissions in Saudi firms listed on the stock market. While other factors are not related to the number of director's board meetings, the audit committee, and the profitability of the company on the disclosure of carbon emissions in the Saudi companies listed on the stock exchange.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.20-26
• /
• 2013

We investigated practical methods of using recycled gypsum board paper in the paper industry. Gypsum board paper is used to produce construction gypsum board, and can be recycled through the recycling process of construction wastes. The experiments were carried out in two ways: One was the substitution of recycled gypsum board papers for KOCC, and the other was the use of recycled gypsum board paper powder. Recycled gypsum board paper was not disintegrated easily, but high temperature and the use of chemicals were able to improve their disintegration. The physical properties of handsheets made of the pulp of recycled gypsum board paper exhibited the same performance level as those made from KOCC except in the parameter of compressive strength. The powder of recycled gypsum board paper was manufactured using a grinder and handsheets were made with the powder and KOCC. The bulk was increased, but the strength properties were decreased by the addition of the powder.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.122-122
• /
• 2001

In this research, an Electronic White Board Control System is developed that stores and prints the data written on the white board. This control system is constructed using an embedded single board PC, whose function is the acquisition(from CCD image sensor system), processing and storing of the data on the screen. The properties of this system are as follows: 1. The system is able to move the screen on the right and left. 2. The system is able to output the data written on the screen to a connected printer. 3. The system is controlled by an external remote PC connected to the system by serial line as well as by the keys on the control panel. The data written on the screen can be sent to the external PC and then can be modified and stored...

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.3-11
• /
• 1998

Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) to examine the effect of liner component coatings by oxidized starch on the properties of corrugated board. Both bursting strength and edgewise compression strength(ECS) of corrugated board were improved by coating of its liner components with oxidized starch. Bursting strength of corrugated board rapidly increased with an initial increase of coating weight, but as the coating weight further increased, there was no increase in bursting strength. The results showed 30.3% improvement for $2.32g/m^2$ coating on outside liner component, 36.8% improvement for $4.84g/m^2$ coating on inside liner component and 39.9% improvement for $7.16g/m^2$ coating on both liner components in bursting strength of corrugated board. Regardless of treated liner components, ECS of corrugated board was improved by coating of oxidized starch, and especially greater improvement was accomplished when corrugated board was coated on inside liner component or both liner components at low level of coating weight - 11.3% improvement for $1.58g/m^2$ coating on Inside liner component and 11.9% improvement for $2.99g/m^2$ coating on both liner components.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.78-82
• /
• 1988

Near sea trawlers of Korea sometimes catch pelagic fishes like file fish by using midwater trawl gear even though usually catch bottom fish. It is reasonable to use the specific otter board as well as specific net in bottom trawling and in midwater trawling respectively. But, the trawlers are so small ranging 100 to 120GT, 700 to 100ps that it is very complicated to use different otter board for bottom trawling and for midwater trawling. The otter board for bottom trawling. is also used for the midwater trawling without any change even though the net is changed into the specific one. Although the otter board in the midwater trawling should be lighter than that for bottom trawling, to use otter board for bottom trawling directly for the midwater trawling without any change makes the net easily touch the sea bed and also make the horizontal opening of the otter boards be limited owing to the length of warp in the southern sea of Korea, main fishing ground of midwater trawling, which is 100m or so in depth. That is why the otter board for the midwater trawling should be made lighter than that in the bottom trawling, even if temporary. The authors carried out an experiment to achieve this purpose by attaching a large styropol float on the top of the otter board. In this experiment, underwater weight of the otter board was 630kg and buoyancy of the float was 510kg. To determine the depth and horizontal opening of the otter board, two fish finder was used. A transmitter of 50KHz fish finder was set downward through the shoe plate of otter board to determine the elevation of otter board from the sea bed, and a transmitter of 200KHz fish finder was set sideways on the starboard otter board to be able to detect the distance between otter boards. The obtained results can be summarized as follows: 1. The actual towing speed in the experiment varied 1.1 to 1.8 m/sec. 2. The depth of otter board was within 41 to 25m with float on the top and 45 to 26m without float in case of the warp length 100m, whereas the depth 68-44m with float and 74-46m without float in case of the warp length 150m. This fact means that the depth with float was 9-4% shallower than that without float. 3. The horizontal opening between otter boards was within 34-41m with float and 30-38m without float in case of the warp length 100m, whereas the opening was 44-50m with float and 37-46m without float in case of the warp length 150m. This fact means the opening with float was 10% greater than that without float in case of the warp length 100m, and 15% greater in case of the warp length 150m. 4. The horizontal opening between wing tips by using the otter board with float was 1m greater than by without float in case of the warp length 100m, whereas the opening by with float was 2m greater than by without float in case of warp length 150m. From this fact, it can be estimated that the effective opening area of the net mouth by using the otter board with float could be made 10% greater than by without float in case of warp length 100m, whereas the area with float 20% greater than by without float in case of warp length 150m.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1220-1222
• /
• 2001

We proposed a modularization design technique for implementing software of on-board train control system. We already proved the efficiency of CASE Tool(SCADE) for safety critical software design. The several functions of train are implemented on CASE tool each modules. We divided functions of train into modules based on the modularization design. We used MATLAB for design of on-board train control software. We proved that this technique is more useful for the software design of on-board train control for EMU.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1023-1026
• /
• 2007

CBTC (Communication Based Train Control) is a railroad system, using wireless communication for data transmission between on-board units and ground units, that makes ground computer periodically collect position and speed data from each train and transmits the preceding train's distance data up to speed limit point so as to make on-board control unit control the optimum train speed. Due to the fact that wireless communication system for train control employs only limited frequency band and output frequency, a number of ground communication units should be installed at track-side; also a running train should carry out Handover function which maintains the communication by accessing a new communication channel of the adjacent on-board communication units in accordance with the output of received radio wave. Especially CBTC is largely dependent on Handoff function between ground communication units. Therefore, this paper provides the method of identification of hazard between ground communication units and on board units.