• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.159-165
• /
• 2007

본 논문에서는 열병합 발전시스템의 특성 실험으로 구한 실측데이터를 이용하여 발전시스템의 모델 파라미터를 결정하는 기법을 제안하였고 이에 대한 타당성을 입증하져다. 제안한 모델은 발전기, 여자시스템, 터빈/조속기를 주로 다루었다. 도출된 파라미터의 타당성을 검토하기 위해서 실측값과 시뮬레이션 결과를 비교하였다. 시뮬레이션 결과를 실측결과와 일치함을 확인하였습니다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권5호
• /
• pp.18-25
• /
• 2014

Traditional investigation procedures of soil and groundwater contamination are followed by soil gas sampling, soil sampling, groundwater sampling, establishment of monitoring wells, and groundwater monitoring. It often takes several weeks to obtain the analysis reports, and sometimes, it needs supplemental sampling and analysis to delineate the polluted area. Laser induced fluorescence (LIF) system is designed for the detection of free-phase petroleum pollutants, and it is suitable for on-site real-time site investigation when coupling with a direct push testing tool. Petroleum products always contain polycyclic aromatic hydrocarbon (PAH) compounds possessing fluorescence characteristics that make them detectable through LIF detection. In this study, LIF spectroscopy of 5 major fuel products was conducted to establish the databank of LIF fluorescence characteristic spectra, including gasoline, diesel, jet fuel, marine fuel and low-sulfur fuel. Multivariate statistical tools were also applied to distinguish LIF fluorescence characteristic spectra among the mixtures of selected fuel products. This study successfully demonstrated the feasibility of identifying fuel species based on LIF characteristic fluorescence spectra, also LIF seemed to be uncovered its powerful ability of tracing underground petroleum leakages.

• 조명전기설비학회논문지
• /
• 제20권5호
• /
• pp.85-91
• /
• 2006

열병합 발전 시스템이 급속히 보급되고 있으며, 대부분 계통 연계형으로 운전될 것으로 예상되며 안정된 계통의 운용을 위해서 연계 계통과의 보호, 제어 해석을 위한 모델이 요구된다. 본 논문에서는 열병합 발전 시스템의 제어, 보호 해석용 EMTDC 모델을 현장 계측에 근거하여 수립하였다. 그리고 특성 시험을 통하여 모델의 파라미터 정정을 하였으며 수립한 EMTDC 모델을 실 현장 시스템에 적용하여 계통 고장에 대해서 제어, 보호 등의 동특성 해석을 수행하였다. 그리고 시뮬레이션 결과를 검토하여 제시한 모델의 타당성을 보였다.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.

• 국제초고층학회논문집
• /
• 제9권4호
• /
• pp.335-342
• /
• 2020

This article comes up with a new method which is based on the visual characteristic of the objects and machine learning technology to achieve semi-automated recognition of the personnel, machine & materials of the construction sites. Balancing the real-time performance and accuracy, using Faster RCNN (Faster Region-based Convolutional Neural Networks) with transfer learning method appears to be a rational choice. After fine-tuning an ImageNet pre-trained Faster RCNN and testing with it, the result shows that the precision ratio (mAP) has so far reached 67.62%, while the recall ratio (AR) has reached 56.23%. In other word, this recognizing method has achieved rational performance. Further inference with the video of the construction of Huoshenshan Hospital also indicates preliminary success.

• Journal of Genetic Medicine
• /
• 제4권1호
• /
• pp.15-21
• /
• 2007

Hereditary syndromes cause approximately 5 to 10% of overall cancer cases. Cancer related with genetic syndromes are found elsewhere, including stomach, breast, colorectum, ovary, brain and so on. Because hereditary cancers are due to germline mutations, these patients have unique clinical features distinct from sporadic cancer. Generally these features include (i) early age-of onset of cancer, (ii) frequent association with synchronous or metachronous tumors, (iii) frequent bilateral involvement in paired organs (iv) frequent association with other site tumors or characteristic clinical manifestation specific to each genetic syndrome. Due to these differences, the management strategy for patients with hereditary cancer is quite different from that for sporadic cancer. Additionally, there are important screening and surveillance implications for family members. Genetic counselling is prerequisite to these families for risk assessment by pedigree analysis, and guidance to clinical or genetic testing. The genes responsible for these syndromes has recently identified, as a result, genetic testing has become important determining factor in clinical decisions.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.715-723
• /
• 2018

The energy storage system consists of batteries, power conditioning system and energy management system. If ESS is installed and operated in the field, SAT(Site Acceptance Test) of ESS is being essentially required for the safety and performance of ESS. Furthermore, in order to more accurately and reliably validate the performance of the ESS in advanced countries, it has been required to perform not only performance testing by H/W equipments but also performance verification by S/W tool. Therefore, this paper proposes the modeling of portable test equipment in order to evaluate the performance and reliability of ESS by using the PSCAD/EMTDC S/W. And also, the prototype of 30[kW] scaled portable test equipments is implemented based on the S/W modeling. From the results of various simulations and testings such as power quality, LVRT and anti-islanding tests, it is confirmed that 30[kW] scaled portable test equipment is useful for SAT of ESS, because the simulation results of PSCAD/EMTDC are identical to them of 30[kW] test equipment at the same test conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.236-240
• /
• 2001

This paper presents the derivation of model parameters against a comparatively small industrial power plant, and validates its model parameters using the stored data measured at the time of on-site generator characteristic testing. Dynamic models such as generator, excitation system, and turbine/governor are mainly dealt in this paper. For the purpose of validation of derived model parameters, the measured results are compared with simulation results. Those of the comparisons between measured results and simulation results show good match.

• 화약ㆍ발파
• /
• 제23권3호
• /
• pp.83-89
• /
• 2005

철골구조물의 노후화에 따라 리모델링 및 해체시기가 도래함에 따라 시공성, 경제성, 안정성 및 환경성을 고려한 노후 철골구조물의 처리방안에 대한 방법들이 모색되고 있다. 현재 H형강의 절단은 산소절단에 의한 방법이 주로 사용되고 있으나, 순간적으로 구조물을 취약화를 시켜 건물을 붕괴시키는 발파해체공법은 아직까지 적용되고 있지 않다. 따라서 본 연구에서는 철골구조물의 발파해체에 필요한 성형폭약(shape charge)을 이용하여 H형강의 절단방법에 대한 요소시험을 실시하였다. 그 결과 사전 절단방법과 부재의 두께에 따른 단면$\cdot$양면 절단방법을 도출하였고, 성형폭약 고정장치에 따른 부착방법과 그 용이성을 확인하였다. 또한, 성형폭약을 이용하여 절단시 발생하는 소음을 저감하기 위하여 방호박스를 이용한 절단시험결과 약 8dB(A)의 저감효과가 나타났으나, 향후 도심지에서의 구조물 해체를 고려한다면 규제기준이하로 소음을 제어할 수 있는 방법에 대한 추가연구가 필요할 것으로 사료된다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권7호
• /
• pp.362-370
• /
• 2002

This paper describes the practical tuning method of dual-input PSS and its application to Muju P/P #2 with Proto PSS, which is based on DSP technology and uses both frequency and power. First, the model parameters of generator system used in this paper have been derived from the generator characteristic testing. Then, in the selection of PSS parameters, the Bode plot is plotted in order to tune the PSS's time constants which are able to compensate the phase lagging due to generator and excitation system. In addition, the eigenvalue analysis is also performed for determining a reliable PSS gain, $K_{s}$. Finally, the transient stability program has been utilized to verify the safe operation of Proto PSS against the predictable disturbances such as the AVR-step test and generator unloading test. In on-site test, the simulated results have been identically duplicated by implementing AVR step test in Muju P/P #2 with Proto PSS, which has the previously designed PSS parameters.s.