• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.257-263
• /
• 2013

Acoustic nonlinearity of surface waves is an effective method to evaluate the micro damage on the surface of materials. In this method, the $A_1$ (magnitude of the fundamental wave) and $A_2$ (magnitude of the second-order harmonic wave) are measured for evaluation of acoustic nonlinearity. However, if there is another source of second-order harmonic wave other than the material itself, the linear relationship between $A_1{^2}$ and $A_2$ will not be guaranteed. Therefore, the second-order harmonic generation by another source should be fully suppressed. In this paper, we investigated the initial second-order harmonic generation in narrowband surface waves by multi-line laser beams. The spatial profile of laser beam was considered in the cases of Gaussian and square-like. The temporal profile was assumed to be Gaussian. In case of Gaussian spatial profile, the generation of the initial second-order harmonic wave was inevitable. However, when the spatial profile was square-like, the generation of the initial second-order harmonic wave was able to be fully suppressed at specific duty ratio. These results mean that the multi-line laser beams of square-like profile with a proper duty ratio are useful to evaluate the acoustic nonlinearity of the generated surface waves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.96-98
• /
• 2002

This paper proposes the digital pin line checker which can extremely improve the efficiency of the pine line checking using a micro processor. The line checker is designed which can check efficiently up to maximum 2048 pin. Alarm busser is designed ringing real-timely the case that the pin line is connected differently with real node number. Accordingly the comparing and identifying work visually the node number showing on the displaying board with real node number is avoided after the electronic stimulus enforce to the pin of the fixture by the test engineer. The digital line checker is designed based on the 8051. And the effectiveness and accuracy of the proposed line checking strategy is tested by simulating the several error connections for pin lines on the small scale board.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1410-1416
• /
• 2011

A corrosion detecting system for 22.9 kV distribution power line insulation cable, which can travel autonomously along the live line, is proposed. Eddy current test method is employed to detect the corrosion, and the system developed here is capable of detecting internal corrosion of a ACSR-OC. Somewhat details of the electrical and mechanical mechanism of the system and traveling algorithm are introduced. Experimental results applied to the sample cables having artificial corrosion and the operating distribution lines are provided. From the result, we confirmed that the system is useful for detecting internal corrosion of a ACSR, and is expected to be a new non-destructive testing equipment in the area of diagnosis for the distribution power line.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1079-1089
• /
• 2001

This paper proposes J and CTOD estimation schemes applied to fracture toughness testing, covering typical homogeneous and bi-material specimens. Recommendations are based on the plastic limit analysis (either slip line field or finite element limit analyses), assuming the rigid plastic material behavior. The main outcome of the present study is that the J and CTOD estimation schemes (both codified and non-codified), recommended for homogeneous specimens, can be equally used for bi-material specimens with interface cracks. The effect of yield strength mismatch in bi-material specimens on the J-integral CTOD is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.351-352
• /
• 2007

부분방전이 고체절연시스템에서 대부분의 절연고장과 관련된 징후를 알 수 있으므로 부분방전시험은 고전압회전기 고정자권선의 절연특성을 효과적으로 진단할 수 있다. 부분방전시험은 다른 고전적인 절연시험법과는 다르게 고전압회전기가 운전중(On-line)인 상태와 정지중(Off-line)인 상태에서 모두 측정이 가능한 장점이 있다. 정지중 부분방전시험은 고정자권선 절연상태를 평가할 수 있는 잘 알려진 시험법이다. 최근에는 운전중 부분방전시험이 권선의 절연상태를 모니터링하는데 효과적인 방법으로 운영자에게 고장징후를 알려주고, 예측보전이 가능하도록 도움을 주고있다. 이 논문에서는 수력발전기에 설치되어 운영중인 운전중 진단시스템의 각 상별 부분방전데이터를 바탕으로 정지상태에서 운전중 및 정지중 진단시스템을 이용하여 부분방전을 측정하고 시험결과를 분석하였으며, 운전중 시험과 정지중 시험의 유사성과 차이점을 확인할 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권2호
• /
• pp.69-75
• /
• 2005

In order to improve the reliability of high voltage rotating machines and mold transformers, it is necessary to understand the breakdown mechanism and life assessment of the high voltage winding parts. Especially the on-line PD test provides the ability to monitor effects, such as slot discharge, internal discharge, and end-winding discharge without interrupting the electrical machines, this method has been proven the major testing technology. Capacitive couplers have been the most widely used sensors for the on-line partial discharge detection in rotating machines nowadays. This paper deals with the electrical characteristics and long-term reliability of a ceramic coupler(CC), which can be easily mounted into high voltage input terminal part, has been developed and tested to continuously measure PD activity during operating condition. This paper presents electrical characteristics (dielectric loss angle, capacitance, PD inception level, breakdown voltage, and frequency response bandwidth) and long-term life test result of the developed 6.6 kV class on-line ceramic coupling sensor. It was found that this sensor had good electrical characteristics to detect PD activity during the operating condition with its detection frequency band is between several and several tens MHz. Also, the voltage life of the 6.6kV class ceramic coupler was calculated over 60 years.

• 전자공학회논문지C
• /
• 제34C권6호
• /
• pp.44-50
• /
• 1997

This paper describes the design and test of an on-line non-invasive network performance monitor (hardware portion) for the SPAX parallel computer. The SPAX parallel computer supports up to 256 intel P6 processors with 4 P6 processors constituting a processign node. The nodes are interconnected with a dual two-level crossbar network calle dXcent-net. Since the performance of the SPAX parallel computer is highly dependent on the proper and efficient operation of the network, an on-line non-invasive network performance monitor (with hardware components) has been developed to aid in the monitoring and tunign of the Xcent-net. Successful testing of a prototype node monitor board and PC interface system shows that our monitor design provides a low-cost practical solution to this problem.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1058-1064
• /
• 2004

As one of reinforcing methods for soft roadbed, the problems that mud-pumping and settlement occurred by soft roadbed, were investigated, evaluated and analyzed through installing relatively economical and efficient geosynthetics on the selected track-bed for testing. Mock-heang to Dong-ryang on the filed resting sections in the Chung-buk lines were selected as investigating the state of track and prepared field after selecting three of 1,700 spots which often make mud-pumping and requiting maintenance for that. Long curved line radiuses(R) of Mock-heang to Dong-ryang are 500m that were installed with 4 types of geosynthetics layers and one ballast layer. Installed testing cross-section is 200m totally with 40 m between places. Strength or prepared roadbed was measured to investigate the state of roadbed and track with constructing(installing) field testing sections and physical properties of roadbed soils were evaluated and analyzed. Also, mud-pumping, settlement of elastic or plastic sleeper, failure or track, wheel-loads, transverse and earth pressures were measured after installing field testing sections.

• 센서학회지
• /
• 제14권3호
• /
• pp.144-149
• /
• 2005

In this paper, we introduce the variation of ride characteristics for HSR 350x(Korea High Speed Train project) through on-line test during about 3 years. The concept of term "ride comfort" is equivocal. Generally it is evaluated as the vehicle vibration. The ride comfort for HSR 350x has been assessed by statistical method according to UIC 513R. The testing results show that HSR 350x has no problems from the viewpoint of the comfort ride on the high speed line and conventional line and that 1st and 2nd suspensions play an important role in the ride characteristics for high speed train.

• 무역상무연구
• /
• 제23권
• /
• pp.3-38
• /
• 2004

On-line game business has emerged as the most lucrative entertainment industry, with over 4 million players in China, with more than 45% of the market dominated by Korean on-line games. While the interactive entertainment market continues to expand, with many new Korean on-line game publishers entering the market, relatively little is known about which factors influence online game players' behavioral intentions (i.e., intention to play, brand-identity, word of mouth, flow, etc.) in this area. It appears that in this extremely attractive and growing services segment, academics, as well as practitioners, would benefit from investigating the relationships among the players' intention to play, social norms, word of mouth, flow, and the impacts of several other key game-related constructs. A conceptual framework is proposed and a simultaneous equation model is developed. This paper develops the exploratory LISREL model for identifying the factors affecting the players' intention to play for on-line games. Based on data collected from on-line questionnaire survey in China, the validity of the model has been tested and interesting conclusions have been developed concerning the relationships between the game-related constructs. It is hoped that this result might provide the useful guidelines for developing the successful on-line game contents. With better understanding of the players' behavioral intentions, Korean on-line game developers should be able to penetrate the China market with sustainable advantage over their competition.