This study effect of engine oils on regulated fuel economy and emissions including particulate matter (PM) to provide basic data for management of engine oil in vehicles. Three engine oils (Group III base oil, Group III genuine oil with additive package and synthetic oil with poly alpha olefins (PAOs)) were used in one gasoline, one LPG(liquefied petroleum gas) and two diesel vehicles. In the case of diesel vehicles, one is a diesel vehicle without DPF (diesel particulate filter) other is a diesel vehicle with DPF. In this study, the US EPA emission test cycle FTP-75, representing city driving, was used. HORIBA, PIERBURG, and AVL gas analyzers were used to measure the fuel economy and regulated emissions such as CO, NOx, and THC. The number of PM was measured using a PPS (pegasor particle sensor). And, the shape of PMs was analyzed by SEM (scanning electron microscope). The effects of oil type on fuel economy, exhaust gas, and PM were not significant because engine oil consumption by evaporation and combustion in the cylinder is very tiny. Fuel and vehicle type were dominant factors in fuel economy and emissions. HC emission from gasoline vehicles was higher than that from other vehicles and NOx emission from diesel vehicles was higher than that from other vehicles. The number of PM was not affected by the engine oil, but by the driving pattern and fuel. The shapes of the PM, sampled from each vehicle using any test engine oil, were similar.
국토교통부에서는 교통약자의 이동 편의 증진을 위하여 승하차에 편리한 저상버스를 도입하였다. 표준모델로 고시된 저상버스는 11 m 급, 압축천연가스(CNG, Compressed Natural Gas)를 사용하는 차량으로 개발되었다. 11 m 급 저상버스는 길이 좁은 농어촌 및 산간지역 도로여건에서의 운행과, CNG 연료의 특성상 충전시설의 한계로 인하여 연료보급의 단점을 가지고 있다. 본 연구에서는 국토교통부에서 교통약자의 이동편의 증진을 위해 진행하는 중형저상버스 표준모델 기술개발 과제의 일환으로 (주)타타대우상용차에서 제작한 LF-40을 대상으로 공차(CVW, Curb Vehicle Weight), 반적차(HVW, Half Vehicle Weight), 적차(GVW, Gross Vehicle Weight) 3가지 중량조건으로 실도로 타행주행을 통하여 주행저항 값을 취득하였고, WHVC, NIER-06, 복합 에너지 소비효율 측정 대상차량 외 차량의 에너지 소비 효율을 측정하기 위한 시험 방법인 정속주행 (60 km/h)모드를 사용하였다. 시험 결과 공차상태의 연비가 가장 좋았으며, 대표적으로 WHVC 모드에서는 공차대비 반적차는 3.5 %, 공차대비 적차는 12 % 연비소모율의 차이를 보였다. 60 km/h 정속 주행모드에서는 다른 시험모드와 다르게 공차보다 반적차의 연비가 높은 것으로 측정되었다. 추후 배출가스 데이터의 분석이 필요할 것으로 판단된다.
Nitrous oxide ($N_2O$) is an important trace gas in the atmosphere not only because of its large global warming potential (GWP) but also because of the role in the ozone depletion in the stratosphere. It has been known that soil is the largest natural source of $N_2O$ in global emission. However, anthropogenic sources contributing from industrial section is likely to increase with rising the energy consumption, and transportation as well. In this study, a total of 32 gasoline-powered passenger vehicles (ranging from small to large engine's displacement and also ranging from aged catalyst to new catalyst) were tested on the chassis dynamometer system in order to elucidate the characteristics of $N_2O$ emission from automobiles under different driving modes. Ten different driving modes developed by NIER were adapted for the test. The results show that the $N_2O$ emission decreases logarithmically with increase of vehicle speed over the all test vehicles ($N_2O$) emission = -0.062 Ln (vehicle speed) + $0.289,\;r^2=0.97$). It revealed that the larger engine's displacement, the more $N_2O$ emission were recorded. The correlation between $N_2O$ emission and catalyst aging was examined. It found that the vehicles with aged catalyst (odometer record more than 8,0000km) emit more $N_2O$ than those with new catalyst. Average $N_2O$ emission was $0.086{\pm}0.095\;N_2O-g/km$ (number of samples=210) for the all test vehicles over the test driving modes.
The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.
승용차의 아키텍처는 어떻게 진화해왔는가? 그간 승용차 아키텍처에 대한 논의는 통합형, 모듈형, 그리고 두 유형의 공존 등이 혼재되어 왔다. 이에 따라 본 연구에서는 글로벌 무역 자료를 활용하여 제품의 중층 구조를 반영한 모듈화의 진전 측정 지수를 개발하고, 이를 아키텍처 유형 프레임워크에 적용하여 승용차 아키텍처의 모듈화 진행을 종단적으로 분석하였다. 분석결과 승용차 아키텍처는 지난 2000년 이후 모듈화가 지속적으로 진행되었음을 확인하였으며, 동시에 모듈화 진행은 구성 모듈 별로 상이한 것으로 나타났다. 모듈 중에는 프론트-엔드, 운전석 및 시트 모듈의 모듈화 진행이 뚜렷함을 확인된 반면, 차체 도어 천장 모듈은 소비자 니즈 충족을 위한 외부 디자인 차별화 및 완성차와 모듈업체 간 상호 조율강화로 인해 모듈화가 더디게 진행됨을 관찰하였다. 또한 샤시, 엔진, 그리고 트랜스미션 모듈로 구성된 플랫폼은 모델 다양화, 생산 원가 절감, 신제품 개발 기간 단축을 위한 완성차 업계의 지속적인 노력에 따라 모듈화가 지속 진전됨을 확인하였다. 플랫폼 구성 모듈 중에서는 트랜스미션의 모듈화 진전이 가장 두드러진 반면 샤시와 엔진 모듈은 완성차 업체의 자체 혁신 노력으로 인해 비교적 통합형 아키텍처 경향이 강한 것으로 나타났다. 본 연구는 제품 아키텍처의 모듈화를 계량적으로 측정, 그 진행을 종단적으로 측정할 수 있는 접근법을 제시하는데 기여하였다. 또한 모듈 별 상이한 모듈화 진전에 대한 고찰을 통해 관련 연구의 분석 수준의 세분화 필요성을 제안하였다. 아울러 본 연구는 승용차 산업 전반에서 일어나고 있는 아키텍처 모듈화 진전 현상을 규명함으로써 완성차 업체 뿐 아니라 모듈 업체의 아키텍처 선택과 그에 따른 전략 수립의 가이드라인을 제시하였다. 본 연구가 다양한 제조업과 그 제품의 모듈화 진전을 규명하는데 활용되기를 기대한다.
차량기술사들은 자동차산업의 현장에서 신제품기획, 마케팅, 연구개발, 제조 및 관리 등의 전문적인 업무를 수행한다. 이들의 전문 기술역량은 기업과 조직의 경쟁력을 증진시키는 원동력이다. 이 연구는 차량기술사들의 전문적 업무역량 특성과 중요도를 규명하여 자동차 기술 분야의 자격검정과 공학교육을 효율적으로 연계할 수 있는 기초자료를 제공하는 데 목적이 있다. 세부 연구문제는 첫째, 전문가(차량기술사, 자동차 관련 전공 대학교수, 자동차 전문가)들은 추론된 차량기술사의 전문적 업무역량별 중요도를 어떻게 인식하고 있는가? 둘째, 차량기술사의 업무역량에 관한 중요도 인식에 있어서 응답자의 소속집단(차량기술사, 자동차공학 전공 대학교수, 자동차 전문가)간에 차이가 있는가? 이다. 연구자들은 현직에 근무하고 있는 차량기술사 등 자동차 신제품 개발관련 전문가 협의 및 개인면담을 통해 차량기술사의 전문적 업무역량을 추출한 다음, 차량기술사 108명, 자동차 및 기계공학전공 대학교수 49명, 기업체의 자동차 전문가 55명을 대상으로 설문지를 배포하여 총 152명(72%)으로부터 설문지를 회수하여 분석하였다. 차량기술사의 전문적 업무역량에 대한 설문지는 영역 및 항목별로 빈도 및 변량분석을 실시하였다. 연구결과는 제동장치설계, 프로젝트진행리더십, 미래예측과 변화관리, 디젤엔진설계, 환경대책, 제품기획과 안전에 대한 기술이 가장 중요한 것으로 나타났고, 인사총무와 재무회계, 노무관리 등에 대해서는 중요도를 낮게 인식하고 있었다. 또한 업무영역평균의 집단별 중요도는 섀시설계영역, 엔진 변속기설계영역, 제품기획 마케팅영역, 자재 물류 품질관리영역, 디자인 차체 의장설계영역, 판매 정비 및 경영지원영역, 소재 및 엔진제조영역, 프레스 및 조립공장 제조 영역 순으로 나타냈다. 자동차개발업무관련 차량기술사의 전문적 업무역량중 고객편익과 안전관련 신기술 응용력, 경쟁력 있는 신제품개발 능력의 중요도가 높았다. 응답집단별로는 교수집단이 타집단 보다 모든 항목에서 중요도 평가 평균값이 높았고, 다음은 차량기술사, 차량전문가 순으로 나타났다.
기동중인 헬리콥터는 공기역학적인 현상에 의하여 발생하는 불규칙 진동과 회전날개의 작동으로 인한 정현파 진동이 합성되어 발생하는 진동, 작업 및 착륙 시 발생하는 충격, 그리고 갑작스런 기동 시 발생하는 가속도와 같은 동적 하중에 노출 된다. 이때 발생하는 진동과 같은 동적 하중은 기체내부로 전달되어 헬리콥터운용에 필요한 전자장비를 가진 한다. 과거에 이러한 현상을 최소화하기 위하여 진동크기 감쇠시키기 위한 완충기를 전자장비의 장착대에 적용하여 왔다. 그러나 헬리콥터의 경우, 저주파에서 정현파 가진이 발생하므로 완충기 적용은 오히려 장착 플레이트 및 전자장비 부품의 파손을 발생시킬 수 있다. 이 연구에서는 완충기를 제거한 장착대를 동적 하중에 강건하며 전자장비에 전달되는 진동크기를 최소화 하도록 설계하였다. 완충기를 제거한 장착 대를 적용 시, 무게와 부피를 획기적으로 줄일 수 있으며 전자장비를 기체에 체결하는 나사 수가 적어짐에 따라 체결작업에 필요한 시간이 감소되는 장점을 갖는다. 최적화 해석에 적용되는 동적 하중을 선정하기 위하여 진동, 충격, 가속도하중을 비교 분석하여 가장 결정적인 동적 하중인 진동에 의한 하중을 선정하였다. 전체모델 유한요소 해석을 통하여 전자장비의 동적 거동을 분석하고 최적화 해석에 필요한 단순화 모델을 구축하였으며, 모달 테스트를 통해서 동특성을 검증하였다. 위상 최적화를 적용하여 강성대비 체적비가 큰 장착대의 형상을 도출한 후 고유진동수, 응력을 제약조건으로 무게가 최소화 되도록 하는 파라미터 최적화를 수행하여 장착대의 최종 형상 및 치수를 결정하였다. 개선모델은 체적 및 질량이 약 13 % 감소하였으며 사용시간은 규격대비 9.2배 증가하였다. 마지막으로 최적화된 장착대를 운용중인 실제 장비에 적용하여 진동환경에 대한 안정성을 평가하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.