• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.559-570
• /
• 2003

The focus of this research was concerned with studying lower body type for Korean adult males. To understand the features of men's lower body required to organize an optimal sizing system for men's tight-fit slacks, information from the measuring values based on research on the physical standard of the nation(l997) were summarized; in addition, a factor analysis and a cluster analysis among multivariate analyses were performed. In terms of the need for appropriate fit in motorcycle wear, basic lower body parts applying to each item had to be taken into consideration to enhance sizing suitability. In the case of the length of the lower limbs, the inclusion of protectors plays an important role in affecting sizing. The factors related to the lower body were defined as follows: Factor 1 was the vertical dimension of the lower body, Factor 2 was the horizontal dimension of waist and hip, Factor 3 was the horizontal dimension of the lower limbs, Factor 4 was the length of hips, and Factor 5 was the ankle height. The lower body part was also divided into 3 clusters. Cluster 1 referred to the smallest stature and skeleton structure among the 3 body types. Cluster 2 represented the biggest stature, with a thin lower limbs body type. Cluster 3 represented a medium stature but with a large skeleton structure of lower limbs, a muscular type. In conclusion, Cluster 2 appeared most in the 20s age groups, but Cluster 3 appeared most in each of the 30s, 40's, and 50's age groups.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.327-335
• /
• 2007

A new optimization scheme and some key techniques are proposed in the development of a vehicle glass drop design software system. The key issues of the design system are how to regenerate the glass surface and make the vehicle glass drop down along the glass channels. To resolve these issues, a parameterized model was created at first, in which the optimizing method and Knowledge Fusion techniques were adopted the optimized process was then written into the glass drop design system by coding with C language and UGS/Open Application Programme Interface functions etc. Therefore, the designer or engineer can simulate the process of glass dropping along the channels to assess the potential interference between glass and door accessory by using this software system. All of the testing results demonstrate the validity of the optimizing scheme, and the parametric design software effectively solves the key issues on development of the door accessory package.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.373-382
• /
• 2008

A method to investigate the design variable tolerance effects on the variances of the response, the characteristics, and the performance of a mechanical system is presented in this paper. The Monte-Carlo method has been conventionally employed to achieve such goals. However, the Monte-Carlo method has some serious drawbacks related to the computation time and the consistent solution convergence. To resolve the drawbacks of the method, a method employing sensitivity information is proposed. Sensitivity equations for a mechanical system are obtained analytically by differentiating the multi-body formulation with respect to a design variable. By using the chain rule along with the sensitivity information, the variances of the response, the characteristics, and the performance of a dynamic system can be calculated.

• Journal of Power System Engineering
• /
• v.19 no.3
• /
• pp.75-80
• /
• 2015

Typically, robot system configured by articulated robot manipulator with 1 DOF transfer unit is being applied in automotive manufacturing automation process. Especially, 1 DOF transfer unit is necessary to extend workspace of robot manipulator. In this configuration, because transfer unit works only one direction, robot manipulator only works in one side in case of car body painting or sealing automation process. it is necessary three robot manipulator system at least. In this paper, in order to robot manipulator works effectively in car body sealing automation application, we are suggested omni-directional manipulator system and conducted studying on redundancy resolution method to solve manipulability-optimal problem.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.103-105
• /
• 2005

Laser welding technology for automobile body is studied. laser system, robot and seam tracking system are used for 3D laser welding system The laser system is used 4kW Nd:YAG laser(HL4006D) of Trumpf and the robot system is used IRB6400R of ABB. The seam tracking system is SMRT-20LS of ServoRobot. The welding joints of steel plate are butt and lap joint. The 3-D welding for non-linear tailored blank is performed after experiments of bead on plate. Finally, the welding process for non-linear tailored blank is developed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.356-357
• /
• 2007

In this paper, we developed an integrated miniaturized device which acquires and transmits the signal of ECG an interested heartbeat and body's temperature and humidity. Using an amplifier circuit on the electrodes and the radio frequency transmission, the developed system dispenses with the use of cables among the electrodes, amplifier, and the post processing system. The sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller Aduc812, LCD, RF-module (frequency 424MHz, 9600-bps). In results, the developed system improves not only the signal-to-noise ration in dynamic ECG & and body's temperature and humidity measurement, but also the user convenience.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.5
• /
• pp.221-226
• /
• 2009

The closed system's internal rigid body particle rotation motion can be distinguished by a main body that becomes the core of the rotation and the particles that are subjected to the rotation. The instance of particles becoming bounded to the main body as a holonomic system, has till now, been well defined and formulated in the study of Kinetics, and the structure of the formulas relate well to reality. However, when the structure is non-holonomic it deviates from these existing equations. The purpose of this research is to categorize the differences between a holonomic system and a non-holonomic system when rotating, through devices. With a special emphasis on the real phenomenon of the non-holonomic system which will be formulated in the form of a model or computer simulation. With these formulas, the center of mass shift in a closed rotating motion system and confined motion of external friction will be adequately expressed, so that it may be applied to computer graphics motions methods.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.53-59
• /
• 2009

Purpose: The purpose of this study was to investigate the effects of proprioceptive exercise on the body alignment of elderly women. Method: The experimental group consisted of twenty elderly women who participated in proprioceptive exercise for 8 weeks. The subjects were measured using Global Posture System equipment for assessing their body alignment. Body alignment was measured at the ear, shoulder joint, knee joint and calcaneocuboid joint on the sagittal plane, and the left and right acromion process positions, the ASIS and the medial malleoulus on the coronal plane. The body alignment data was used to assess the changes before and after proprioceptive exercise. The data of the experimental group was compared and analyzed using the Wilcoxon singed-rank test between before and after proprioceptive exercise. The Mann-Whithney test was used to compare the experimental group and the control group. Result: The result of this study was that the body alignment of the experimental group at the ear and knee joint on the sagittal plane was significantly in alignment with the line of gravity (p<0.05) before and after proprioceptive exercise. The body alignment was statistically different (p<0.05) between the experimental group and the control group on the frontal plane and sagittal plane. Conclusion: This study showed that proprioceptive exercise does affect the body alignment in elderly women. This indicates that there is interaction that plays a crucial role for proprioceptive stimuli and the body alignment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.263-267
• /
• 2015

current mine detector can't division the section if it is conducted and it needs too much labor force and time. in addition to, if the user don't move the head of sensor in regular speed or move it too fast, it is hard to detect a mine exactly. according to this, to improve the problem using one direction ultrasonic wave sensing signal, that is made up of human body antenna part, main micro processor unit part, smart glasses part, body equipped LCD monitor part, wireless data transmit part, belt type power supply part, black box type camera, Security Communication headset. the user can equip this at head, body, arm, waist and leg in removable type. so it is able to detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal and it can express the 2D or 3D film about distance, form and material of the mine. so the battle combats can avoid the mine and move fast. also, through the portable battery and twin self power supply system of the power supply part, combat troops can fight without extra recharge and we can monitoring the battle situation of distant place at the command center server on real-time. and then, it makes able to sharing the information of battle among battle combats one on one. as a result, the purpose of this study is researching a smart wearable mine detector which can establish a smart battle system as if the commander is in the site of the battle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.10
• /
• pp.1632-1646
• /
• 2010

This article is an analysis of the fit preference of the knitted jacket according to body types for 30's and 40's adult women through a comparison of real and virtual fit. A five point likert scale was used to evaluate the degree of the preference of real and virtual fit. The data were analyzed with t-test and ANOVA using statistical program SPSS 17.0. The results are as follow. 1. The real and virtual fit preference of the knitted jacket according to body types indicates that respondents preferred pattern 2 for body type N than the rest of the patterns; however, respondents preferred pattern 3 for body type A and H. 2. There were no significant differences between real and virtual fit preference. 3. It is necessary that the knitted jacket follow a similar size tolerance like a woven jacket. The results show that the next generation of virtual try-on systems need the development of a minus clothing ease scale.