• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.110-113
• /
• 2006

This paper describes the development process of body and full vehicle for reduced idle vibration through the data level of frequency and sensitivity. The vibration mode map is used to separate body structure modes from resonance of engine idle nm and steering system. This paper describes the analysis approach process to reduce the variation of uncertainties for idle vibration performance at initial design stage. The robust design method is performed to increase the stabilization performance under vehicle vibration. It is used to predict the effects of the stiffness deviation according to the spot welding condition of the body structure. The tolerance associated with hood over slam bumper is analyzed for the quality deviation of the moving system in full vehicle. And the glass sealant stiffness and weight difference is considered for the deviation characteristic. The design guideline is suggested considering sensitivity about body and full vehicle by using mother car at initial design stage. It makes possible to design the good NVH performance and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국의상디자인학회지
• /
• 제24권3호
• /
• pp.145-158
• /
• 2022

To grasp the size system of children's clothing online shopping malls, basic size charts for clothing products from 14 shopping malls were collected, compared, and analyzed. Looking at the age range of the basic size chart for each company, the minimum age is 1 year old, the maximum age is 14-15 years old, and all companies included ages up to 7 years. In addition, as for the number of size designations, children's clothing companies used seven to eight designations, and there were six types of size designation methods. Next, looking at the height range for each size, even with the same size designation method, the height range differed depending on the company. Also, the KS size standard does not consider body weight, but many companies use weight as a reference body size. Compared with the child body size data of the 6th Korean Body Size Data, the height and weight range for each size provided by the company showed differences between companies. The results of this study can be used in the future as basic data when revising and supplementing the clothing sizes in children's clothing companies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1335-1338
• /
• 2004

This paper describes the result of structure analysis of body structure. The purpose of the analysis is to evaluate an safety which body structure shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load and operating condition. Material of body structure applied an aluminum alloy. Body structure consist of side frame, under frame, roof frame, end frame. FEM analysis is based on 'Performance Test Standard for Electrical Multiple Unit, noticed by Ministry of Construction & Transportation, in 2000 ' and reference code is JIS E 7105. The analysis results have been very safety and stable for design load conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.100-110
• /
• 2007

A new design approach for a delicate treatment of complex geometries such as a wing/body configuration is arranged using overset mesh technique under large scale computing environment for turbulent viscous flow. Various pre- and post-processing techniques which are required of overset flow analysis and sensitivity analysis codes are discussed for design optimization problems based on gradient based optimization method (GBOM). The overset flow analysis code is validated by comparing with the experimental data of a wing/body configuration (DLR-F4) from the 1st Drag Prediction Workshop (DPW-I). In order to examine the applicability of the present design tools, careful design works for the drag minimization problem of a wing/body configuration are carried out by using the developed aerodynamic shape optimization tools for the viscous flow over multiple-body aircraft geometries.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.80-94
• /
• 1994

As for axisymmetirc sheet metal forming, a kind of pick-up apparatus for body-wrinkling is deviced. Experiments with both hemispherical and flat headed punches, with various clearances between punch and die, with respect to three kinds of materials each of which has two thicknesses, are performed. Firstly the process of evolution of body-wrinkling is observed. Then the critical blank-holding force (or meridional tensile force) for suppression of body-wrinkling at a specified punch-stroke is measured for all cases mentioned above. An empirical formula for it is proposed. Deformation patterns and stress distributions are analysed by the use of FEM. A simplified critical condition for body-wrinkling is formulated and introduced into the FEM program. And its effectiveness is checked by comparison with the experimental results. Using this FEM system, the governing factors of body-wrinkling are cleared up.

• 산업기술연구
• /
• 제5권
• /
• pp.15-20
• /
• 1985

The microstructure of sintered body of two component(kaolin-pottery stone) system after firing was examined with scanning electron microscope. At first the pottery stone was melted into glassy phase and the kaoline was decomposed to mullite and silica at higher temperature. The interlocked mullite crystals and silica surrounded by glassy phase are belived to increase strength.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.481-484
• /
• 1990

Normal operation when deeply submerged is a relatively easy task, and human operator control can often provide adequate performance. Near surface depthkeeping, on the other hand, is difficult to both man and machine. Because of the inherent limitation of the human operator, manual control may prove inadequate for near surface depthkeeping in some sea state. This paper describe the control algorithm of an automatic depth control system for submerged body that can be used for both near surface and deeply submerged depthkeeping operations. The computer simulations demonstrate the excellent depthkeeping performance of the controller under seaway effects.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.132-132
• /
• 1997

The influence of the dam-reservoir interaction on the seismic response of concrete dam is studied. The dam body is assumed to behave elastically and modeled by FEM. The impounded water is assumed to be inviscid and compressible fluid and modeled by BEM. The seismic response of dam-reservoir system is analyzed by coupling two regions : the dam body and reservoir.

• 동의생리병리학회지
• /
• 제26권6호
• /
• pp.855-863
• /
• 2012

The organic and holistic recognition method about nature in east asian philosophy is also applied to the study of the human body in Korean medicine. In Korean medicine, the human body is being understood from a holistic point of view rather than a mechanical or reductive one. The main east asian philosophies are the heavens thought and the Yin-yang/Five Phase Theory. This study will explore the influence the general flow of heavens thought has on explaining the human body in Korean medicine and the formation of how the human body is perceived in "Huangdineijing"(黃帝內經). First, the primitive meaning of heaven was developed to include the natural heaven of Xia (夏), the lord heaven of Shang(商) and the moral heaven of Zhou(周) dynasties. Among these, the natural heaven notion of the Xia(夏) dynasty which recognized heaven as the one with the power to create everything. This was followed by Taoism which established the contrasting system of heaven and earth. Based on this, "Huangdineijing"(黃帝 內經) developed the perception of the human body, taking into account, heaven as the original substance to generate the human body through the mutual sympathy between heavenly energy and earthly form. The perspective of the correspondence between nature and human in "Huainantzu"(淮南子) and "L$\breve{u}$shichunqiu"(呂氏春秋) was succeeded by Tung Chung-Shu(董仲舒). Based on this development, the perception of the human body in "Huangdineijing"(黃帝內經) is related to the seasonal cycle and the notion of night and day to balance the physiology of the human body. It recognizes that its structure, shape, emotional state and physiological actions are correlated with heaven.

• 대한인간공학회지
• /
• 제24권3호
• /
• pp.43-52
• /
• 2005

A two-dimensional posture measurement system was developed to evaluate the risks of work-related musculoskeletal disorders(MSDs) easily on various conditions of work. The posture measurement system is an essential tool to analyze the workload for preventing work-related musculoskeletal disorders. Although several posture measurement systems have been developed for workload assessment, some restrictions in industry still exist because of its difficulty on measuring work postures. In this study, an image recognition algorithm was developed based on a neural network method to measure work posture. Each joint angle of human body was automatically measured from the recognized images through the algorithm, and the measurement system makes it possible to evaluate the risks of work-related musculoskeletal disorders easily on various working conditions. The validation test on upper body postures was carried out to examine the accuracy of the measured joint angle data from the system, and the results showed good measuring performance for each joint angle. The differences between the joint angles measured directly and the angles measured by posture measurement software were not statistically significant. It is expected that the result help to properly estimate physical workload and can be used as a postural analysis system to evaluate the risk of work-related musculoskeletal disorders in industry.