• 한국태양에너지학회 논문집
• /
• 제25권2호
• /
• pp.1-8
• /
• 2005

On-off differential controller is one of the very important components which affect the system performance of the active solar thermal system. In this study, analyses were made regarding the influence of "on-off" setting temperature on the system efficiency and on the electrical consumption by circulation pump. This study was performed by experiment as well as the computer simulation using TRNSYS program. The simulation system was developed in this study was verified the its reliability by the experimental results. As a results, the turn off temperature(${\Delta}T_{off}$) is much more influence than the turn on temperature(${\Delta}T_{on}$) on the system efficiency. It is more clear and sensitivity in winter season. Finally the optimum on-off setting value and the system on-off pattern according to the several different kind of system was also represented.

• 한국의상디자인학회지
• /
• 제16권2호
• /
• pp.15-29
• /
• 2014

Setting the ease amount takes the important part to the fit that consumers satisfies. Therefore, it is required to create a pattern for off-the-rack jackets that considers the proper amount of ease. However, few studies have been done previously regarding the ease amount of jacket pattern for the women in their 20s whose demand for jacket is high and who are sensitive to the fit. Therefore, this study selected top five brands in terms of sales and preference among the national female apparel brands. It obtained a tailored jacket pattern for basic size (55 size) and made the jacket. Then, an expert panel group put the pattern on Hani body, a torso dummy for education made by the anthropometric data of Size Korea for females in their 20s and conducted an evaluation on the ease amount and analyzed the results. As a result, the ease amount of the Pattern A was evaluated as proper and that of the Pattern B was found to be lease proper. From the fact, we can see that each of the top 5 off-the-rack brands has different ease amount, though they are of the same basic size (55 size).

• 한국통신학회논문지
• /
• 제23권4호
• /
• pp.997-1005
• /
• 1998

본 논문은 기존 on-off 앨고리듬을 개선하여 어레이 소자의 위상을 계산량이 적고 정확하게 구할 수 있는 그래디언트 on-off 방법을 제안한다. 제안 방법의 우월성은 어레이 출력파워를 어레이 소자의 위상으로 그래디언트한 수식을 이용하므로써 기존 방법보다 어레이 출력파워의 증감을 더 정확하게 구할 수 있는데 기인한다. 제안 방법은 어레 이 소자의 위상을 조정하여 원하는 신호의 입사 방향으로 최대 빔패턴을 형성한다. 선형 어레이와 이차원 어레이의 두 경우를 나누어서 제안 방법을 적용하여 분석한다. Texas Instrument사에서 제공하는 부동소수점방식의 TMS320C30의 평가보드로 구현하므로써 제안 앨고리듬의 실시간 처리 가능성을 증명하였다. 제안 방법은 스냅샷당 빔형성 과정의 계산량이 적기 때문에 응답이 빨라야 하는 이동통신 시스템에 적합하다. 제안 방법을 CDMA 이동통신 상황에서 시뮬레이션하여 성능분석한 결과 수신신호의 성능이 상당히 향상되는 것을 확인하였다.

• 디자인학연구
• /
• 제15권3호
• /
• pp.93-102
• /
• 2002

거듭 발전해온 여러 분야의 기술들은 공간과 물건들 그리고 우리들의 상호관계에 더욱 더 많은 영향을 주고 있다. 그러나, 그럼에도 불구하고 그 기술들로 이루어진 제품과 서비스를 이용하는 방법에는 한계성을 가지고 있다. 즉 아날로그의 우리의 생활환경과 디지털 정보환경의 존재 적 상이성으로 제품과 그 서비스의 사용성의 소통은 원활하지 못하고 있다. 예를 들어 ON과 OFF는 마치 BLACK과 WHITE처럼 표현되어 우리가 일상적으로 생활하는 아날로그 환경과는 달라 불편함을 느낄 때도 있다. 이 시점에서 디지털 정보환경의 사용성을 아날로그 적인 요소 (HUMAN QUALITY)를 가진 입력장치(INPUT DEVICE)의 개발과 제안은 의미가 있다. 이 연구의 궁극적인 목적은 제품과 그 제품이 가지는 서비스의 가치를 사용성을 중심으로 개선하고 제안하고자 함이다. 예를 들어 제품의 가치를 소통할 수 있는 방법은 그 기능에 접근성을 가진 SWITCH라고 할 수 있는데, 그 디지털 적 행위의 소통성으로 가진 스위치들은 제품의 기능과 서비스를 이해하기에 상당한 한계성을 가진다. 그래서 본 연구는 제품의 특성과 환경에 맞는 아날로그 입력장치를 개발하고 제안하고자한다. 시간, 패턴, 자유, 리듬 등을 ON과 OFF사이에 설정함으로서 존재하지만 볼 수 없었던 제품과 그 서비스의 가치를 찾아 좀더 자연스럽고 따뜻한 HUMAN QUALITY를 가진 제품을 만들고자 함이다. 단순히 ON, OFF가 아닌........

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.69-78
• /
• 1999

In this study a new pattern of pressure control of hydraulic cylinder using high speed On-Off solenoid valve in the electro-hydraulic system has been suggested. The control valve is 3-way high speed On-Off solenoid valve which is operated by PWM(Pulse Width Modulation)control signal. The high speed On-Off solenoid valve has a tendency to induce severe pressure fluctuation in the hydraulic actuator so it has not been used for the purpose of closed loop control with direct pres-sure feedback. In this study closed loop control with direct pressure feedback is enabled by using a digital filter which has linear minimum mean square filter algorithm. Through some experiments it is confirmed that stable pressure control can be realized by the proposed control technique.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.71-82
• /
• 2011

Electronic display markets has been developed. The cathode ray tube of brown form recently celebrated their 100th by first display. Also LCD of flat form recently celebrated their 25th by second display and it has advantage of small volume, lower consumption power. But FPD has problem that is property of brittle and noncarrying by glass substrate. Therefore the arrival of portable electronics devices has put an increasing premium on durable, lightweight and inexpensive display components. It is flexible display by third display. Also electronics field such as printed wiring board, RFID, membrane switch prefer flexible display. The conductive pattern can be used mostly in field of electronic displays and electronics. This manufacture of conductive pattern in present used is screen printing. The the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity. screen printing has problem that is low productivity and use not flexible substrate because of high fire temperature. This study was developed novel method to form the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1489-1492
• /
• 2005

Compared to other nano-patterning techniques, Nano imprint Lithography (NIL) has some advantages of high throughput and low process cost. To imprint low temperature and pressure, UV Nano imprint Lithography, which using the monomer based UV curable resin is suggested. Because fabrication of high fidelity pattern on topographical substrate is difficult, bi-layer Nano imprint lithography, which are consist of easily removable under-layer and imprinted pattern, is being used. If residual layer is not remained after imprinting, and under-layer is removed by oxygen RIE etching, we might be able to fabricate the bi-layer pattern for easy lift-off process.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.438-440
• /
• 2003

This study is introducing a new approach of ATInSAR hologram for modeling wave refraction spectra pattern. TOPSAR data with L$_{-HH}$ and C-vv bands utilized spatial variation of wave refraction. Based on the phase information in along track interferometry, and ATInSAR hologram the quantitative information such swell wave height and spectra energy have been modeled. The phase information in ATInSAR hologram images can be transferred to wave refraction The ATInSAR hologram can be used to investigate the wave refraction pattern along the coastal waters. The fringe information pattern was shown to be useful in modeling wave refaction spectra varaition. The hologram interferometry wave refraction model consists of two sub-models. The purpose of first sub-model is to determine the swell wave height by using ATInSAR. Second sub-model aims to generate the holographic interferometry from the information of two wave spectra which detected by ATInSAR technique. The azimuth cut-off variations along the fringe patterns will be estimated. As azimuth cut-off contains the wave height information which could be used the significant wave height variation in convergence and divergence zone.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.1-8
• /
• 1994

In this paper, we propose an efficient two-step pattern matching method which promises shape distortion-tolerant recognition of handwritten of handwritten Hangul syllables. In the first step, nonlinear shape normalization is carried out to compensate for global shape distortions in handwritten characters, then a preliminary classification based on simple pattern matching is performed. In the next step, nonlinear pattern matching which achieves best matching between input and reference pattern is carried out to compensate for local shape distortions, then detailed classification which determines the final result of classification is performed. As the performance of recognition systems based on pattern matching methods is greatly effected by the quality of reference patterns. we construct reference patterns by combining the proposed nonlinear pattern matching method with a well-known averaging techniques. Experimental results reveal that recognition performance is greatly improved by the proposed two-step pattern matching method and the reference pattern construction scheme.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.57-58
• /
• 2002

Asperity arrays and Independent asperities were fabricated on a silicon plate. Then pull-off and friction forces were measured on each asperity pattern by using AFM (atomic force microscope) in humid air and high vacuum of $2{\times}10^{-5}$ Pa. The probe of AFM cantilever has a flat square of about $1\;{\mu}m^2$ on its tip. The results showed that the pull-off force was proportional to the curvature radius of asperity peak in each ambient condition. The friction force was proportional to the pull-off force and was slightly higher in the humid air than in the high vacuum.