• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.325-332
• /
• 1969

An attempt has been made to investigate the nature of the characteristic darkening reaction occurring in the rice bran oil during the storage. Several pigments were separated by using column and thin layer chromatography of the pigments was made in the light of the knowledge of absorption spectral behavior. The presence of trace amount of iron and phytosteryl esters of ferulic acid (3-methoxy-4-hydroxy-cinnamic acid) was found to be responsible for the development of the characteristic color in rice bran oil. The model reactions with the ferulate, iron and fatty acids could be suggested the mechanism.

• Journal of Food Hygiene and Safety
• /
• v.11 no.2
• /
• pp.89-97
• /
• 1996

This study was carried out to determine the pesticide residues in rice bran, crude rice bran oil and the oil of various stages of refining process. Each samples were analyzed for 41 pesticide residues by multiclass multiresidue methods with GC-ECD, NPD and identified by GC-MSD. Rice bran were detected cypermethrin, diazinon, dichlofluanid, and its level were ranged from 0.01~0.122 ppm. Crude rice bran oil were detected cypermethrin, diazinon, dichlofluanid, dimethoate, etrimfos, flucythrinate, and its level were ranged from 0.015~0.654 ppm Crude rice bran oil has the higher level of pesticide residues and more varieties of pesticides than rice bran. But pesticide residues in the crude rice bran oil was found to be almost removed then pigment was decolorized by absorption using active carbon and clealy removed by thermolysis for deodorization.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.1
• /
• pp.13-22
• /
• 1997

In order to investigate the effects of microstructure Oil film on the welding spatter in Zn electroplated steel, Zn electroplated surface and layer structure with USS-Paddition was observed using XRD, XPS and optical microscopy. Wettability of water drop on the Zn electroplated steel surface was measured using Z.Mei model. Oil absorption test was carried out using Oil pen. Morphology of spot welding and spatter with USS-P addition, applied current, and oil-spray or oil-without was observed using SEM and optical microscopy. Surface morphology of Zn electroplated steel showed finer structure as USS-P content increased. Wettabiliy on the Zn electroplated surface decreased with increasing USS-P content. Size of welding trace increased and spatter occured arround the welding part as applied current increased, whereas spatter disappeared as USS-P content increased and disappeared in case of oil spraying on the Zn electroplated surface.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.22-28
• /
• 2009

Oil-absorbable nonwovens were produced by melt-blown processing of polypropylene chips. The melt-blown processing conditions, such as air pressure, and gear pump speed, DCD. In this study, these three factors were chosen to produce samples. Experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. The effect of the factors on oil absorption properties of melt-blown nonwoven fabric such as oil absorbency were evaluated. As a result, the fiber diameter decreased as gearpump speed decreased or air pressure increased. The oil absorbency increased as air pressure increased or gearpump speed decreased and with the DCD increasing the oil absorbency significantly increased.

• Advances in materials Research
• /
• v.11 no.2
• /
• pp.121-146
• /
• 2022

In the recent years, the use of agricultural waste in green cement mortar and concrete production has attracted considerable attention because of potential saving in the large areas of landfills and potential enhancement on the performance of mortar. In this research, microparticles of palm oil fuel ash (POFA) obtained from a multistage thermal and mechanical treatment processes of raw POFA originating from palm oil mill was utilized as a pozzolanic material to produce high-performance cement mortar (HPCM). POFA was used as a partial replacement material to ordinary Portland cement (OPC) at replacement levels of 0, 5, 10, 15, 20, 25, 30, 35, 40% by volume. Sand with particle size smaller than 300 ㎛ was used to enhance the performance of the HPCM. The HPCM mixes were tested for workability, compressive strength, ultrasonic pulse velocity (UPV), porosity and absorption. The results portray that the incorporation of micro POFA in HPCMs led to a slight reduction in the compressive strength. At 40% replacement level, the compressive strength was 87.4 MPa at 28 days which is suitable for many high strength applications. Although adding POFA to the cement mixtures harmed the absorption and porosity, those properties were very low at 3.4% and 11.5% respectively at a 40% POFA replacement ratio and after 28 days of curing. The HPCM mixtures containing POFA exhibited greater increase in strength and UPV as well as greater reduction in absorption and porosity than the control OPC mortar from 7 to 28 days of curing age, as a result of the pozzolanic reaction of POFA. Micro POFA with finely graded sand resulted in a dense and high strength cement mortar due to the pozzolanic reaction and increased packing effect. Therefore, it is demonstrated that the POFA could be used with high replacement ratios as a pozzolanic material to produce HPCM.

• Food Science of Animal Resources
• /
• v.43 no.6
• /
• pp.1128-1149
• /
• 2023

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2005.04a
• /
• pp.72-75
• /
• 2005

• Tribology and Lubricants
• /
• v.38 no.4
• /
• pp.121-127
• /
• 2022

This study presents the development of an integrated oil purification system consisting of moisture removal, oil flushing, and oil filtering devices. In this system, the oil flushing device is combined with a micro-bubble generator. Oil purification is necessary for ensuring the high performance of the lubricant through the efficient removal of contaminants and thus enables good maintenance of mechanical systems. The developed purification system removes moisture, varnish, and solid particles. Moreover, during oil purification, the oil flushing device separates foreign materials and contaminants remaining in the lubricating oil piping or mechanical systems. The microbubble generator, which is combined with the oil flushing device, can separate harmful contaminants, such as sludge, wear particles, and rust, from piping or lubrication systems through the cavitation effect. Moisture is removed using a double high-vacuum chamber, while sludge and varnish are removed via electro-absorption using a high-voltage generator. Additionally, the total maintenance cost of the system is reduced through the use of domestically fabricated cartridge filters composed of glass fiber and cellulose. The heater, which maintains the temperature of the lubricant at 60℃, can process 41,000 L of lubricant simultaneously. Multiple tests confirmed that the proposed integrated purification system exhibits good performance in oil flushing and removal of water and varnish.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.905-911
• /
• 2005

Physical properties and compositions of dietary fiber sources (DFS) from peels of Asian pear fruit, Hosui, Niitaka and Chuwhangbae, were examined at different growth stages, young, unripe, and ripe fruits, to investigate their use as functional ingredients. Total dietary fiber (TDF) contents of DFS prepared from peels of three cultivars at three stages were high, 74.00-88.38%, with most being insoluble dietary fiber. Total phenolic compound contents of DFS were 1.64-4.46mg/g, with those of Niitaka and Chuwhangbae increasing with growth stages. Density of DFS from young fruit was significantly lower than those from unripe and ripe fruits (p<0.05), because particle size of DFS increased with growth stages within cultivars. Water-holding capacity (WHC) and oil absorption were 3.11-6.03g water/g solid and 1.98-2.57g oil/g sample, respectively. Young fruits, which showed lowest WHC value, had highest oil absorption value. Particle size of DFS had significant correlation with density, WHC, and oil absorption (p<0.05). Physical properties of DFS were mainly influenced by cellulose and uronic acid.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.46-51
• /
• 2008

Honeycomb panel has a constructive advantage because it is constructed with a honeycomb core, so it has relatively higher strength ratio to weight. Therefore honeycomb panel has been used as the light weight panels in the high-speed railway technology and high-speed ship like as cruise yachts. Also it has been used in the aircraft and aerospace industry as a structural panel because light weight structure is indispensible in that field of industry. Recently, the honeycomb panel is embossed in the viewpoints of high oil prices as the lightweight panel of the transport machine, however the sound insulation capacity of the honeycomb panel is poorer than those of uniform and another sandwich panels. In this paper a method to improving the sound absorption coefficient of a honeycomb panel Is studied by using the Helmholtz resonator. The sound absorption coefficients for some kinds of honeycomb cores are demonstrated by the normal incident absorption coefficient method.