• 공업화학
• /
• 제16권5호
• /
• pp.719-723
• /
• 2005

Tetraethyl orthosilicate (TEOS) 혹은 1,2-bis(triethyoxysilyl)ethane (BTSE)과 여러 종류의 organosilane들을 공중합하여 유 무기 혼성 메조포러스 물질들을 제조하고, 이들이 공기 중의 휘발성 유기화합물(VOC)들을 흡착 제거하는 능력을, TEOS 만을 사용하여 제조한 친수성 무기 메조포러스물질인 SBA-15와 비교 평가하였다. 유기 구조의 도입에 의한 소수성의 증대는 메조포러스 물질이 VOC를 흡착 제거하는데 긍정적 효과를 줌을 관찰하였다. 특히 BTSE와 phenyl triethoxysilane을 중량비 90:10으로 공중합한 유 무기 혼성 메조포러스 물질의 VOC 제거 능력은 우수하였다. 또, 물속에 분산된 기름 성분을 흡착 제거하는데 유 무기 혼성 메조포러스 물질들을 유용하게 응용할 수 있음도 정성적으로 관찰하였다.

• 한국대기환경학회지
• /
• 제2권2호
• /
• pp.9-18
• /
• 1986

For identification and apportionment of sources emitting particulate matters in environment, the multi-elemental characterization of size-density fractionated particulate matters was carried out. Eight types of samples were tested; soil, flyash released from burning of bunker-Coil, diesel oil, coal, and soft coal, urban road-way dust, urban dust fall, and airborne particulate matter. The fractions of particulate matters obtained by heavy liquid separation methos with a series of dichloromethane-bromoform were then analyzed using atomic absorption spectrophotometry for Ni, Cr, Cu, An, Fe, Al, and Mg. Each sample showed a different concentration profile as a function of density, and a number of useful conclusions concerning characterization of elemental distribution were obtained. From the density distributions of elements in soil, the maximum value was found for all elements in the density range of 2.2 $\sim 2.9g.cm^{-3}$, including the density of $SiO_2$. However, the distribution of metallic compounds with the density lower than $2.2g.cm^{-3}$ was prevalent in urban roadway dust, urban dust fall, and airborne particulate matter. And the density distribution curves of these urban dusts also have the higher distribution at the density of 2.2 - 2.9g.cm^{-3}$, including the density of wind-blown silica. This tendency generally was prevalent in the natural source elements, such as Al, Fe, Mn, and Mg. The maximum values were found in the density ranges of 1.3 $\sim 2.2g.cm^{-3}$ from the density distribution of elements in oil fired flyash. These distributions of anthropogenic source elements, such as Zn, Ni, Cu, and Cr were higher predominately than those of natural source elements. And the higher distribution was found in the density range of $2.2 \sim 2.9g.cm^{-3}$ from the density distribution of elements in coal and soft-coal fired flyash. These distributions showed similar patterns to soil. But anthropogenic source elements somewhat predominated at the density ranges of $1.3 \sim 2.2g.cm{-3} and 2.9g.cm^{-3}$ to soil. Therefore the higher distribution of anthropogenic source elements in the density ranges of $1.3 \sim 2.2g.cm^{-3} and 2.9g.cm^{-3}$ was considered as anthropogenic origin.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.111-116
• /
• 2001

Waste office paper, photocopied or laser printed, has recently increased along with office automatization. In waste office paper, toner ink is used as the printing medium in place of conventional oil ink. Since toner ink cannot be saponificated by alkali and be decolored by bleaching, different from the case of oil ink, toner remains on regenerated paper as black specks. Although cascade recycling of waste office paper is compelled at present, the demand for low-grade paper is limited. From such circumstances, a new separation process for waste office paper is demanded to achieve parallel recycling. At the first stage of separation studies, the sharpness of separation is evaluated using small separators to obtain fundamental data. In a lab-scale separator, the sample amount of one feed is generally a few grams. However, the sample amount used for brightness, ERIC, and image analysis that are generally used to evaluate the efficiency of deinking are not small for lab-scale tests of these analyses. This paper describes an investigation of a sheet preparation method by a small amount of sample under 0.5g and compares the precision of toner content determination of spectroscopic analysis and image analysis from the viewpoint of separation evaluation. The easiness and convenience of the operation using only general-purpose equipments has also been set as a principle purpose. From the viewpoint of an analysis that yields high precision with a small amount of sample in short time, the method calculating the absorption coefficient from diffuse reflectance in the visible region is the most rational method in this study.

• 한국작물학회지
• /
• 제31권1호
• /
• pp.24-29
• /
• 1986

참깨의 N, P, K 시비수준별 생육과 함유량, 지방산조성분포를 검토하여 얻은 결과를 요약하면, 1. 질소배비(16k/10a)시용시 초장과, 주당삭수, 착삭부위장, 분지수등은 증가되나, 삭당입수와 종실중은 표준비(8k/10a)에서 가장 많았다. 2. 가리의 배비(18k/10a)시용시에는 지상부 생육과 등숙비율이 모두 높았으며, 인산 및 가리, 배비구(N 8, P$_2$O$_{5}$ 8, $K_2$O 18k/10a)에서는 표준비(N 8, P$_2$O$_{5}$ 4, $K_2$O 9k/10a)의 종실중 91kg보다 11% 증가되었다. 3. 엽의 무기성분중 N과 $K_2$O는 파종후 20일에 가장 높았으며 이후 점차 감소되는 경향으로 N과 $K_2$O 배비시 엽의 N, $K_2$O 배비시 엽의 N, $K_2$O 함량은 증대되었다. 4. 시비수준별 함유량은 질소의 배비시용구(16k/10a)와의 P$_2$O$_{5}$ 표준시용구(4k /10a)에서 가장 많았으나, 가리에서는 차이가 없었다. 5. 지방산조성은 양질의 Oleic acid는 질소, 인산,가리의 배비구에서 가장 많았으며, Linoleic acid는 인산배비구에서 가장 높았다.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.737-742
• /
• 2016

다공성 탄성체는 기름유출과 같은 상황에서 적용 가능한 선택적 흡수재로 각광을 받고 있다. 다공성 탄성체의 선택적 흡수효율은 표면 거칠기, 물리화학적 처리기법, 수압안정성 등의 영향을 받는다. 본 연구에서는 PDMS(polydimethylsiloxane), 미소 소금입자 및 계면활성제(silwet L-77)를 이용하여 다공성 PDMS를 제작하는 방법에 대해 설명한 후, 제작과정 중 물리화학적 처리를 통해 상기 다공성 PDMS의 소수성을 강화하거나 혹은 그 특성을 친수성으로 만드는 방법에 대해 기술한다. 물리적 처리방법으로는 소금입자의 크기조절을 통해 공극 크기(혹은 표면 거칠기)를 조절하고 화학적 처리방법으로는 계면활성제의 혼합비를 조절하여 표면 에너지를 변화시킨다. 제작된 다공성 PDMS를 이용하여 접촉각 및 흡수율을 측정함으로써 소금입자의 직경과 계면활성제의 혼합비가 다공성 PDMS의 접촉각과 흡수율에 미치는 영향을 정량적으로 측정한다.

• 한국식생활문화학회지
• /
• 제29권5호
• /
• pp.428-436
• /
• 2014

This study was conducted to investigate the use of sugar alcohols (sorbitol, erythritol, and xylitol) as alternative sweeteners for replacing sucrose in Yukwa (traditional Korean oil-puffed rice snack). The moisture contents of Bandegi (dried Yukwa dough) and Yukwa containing sugar alcohols were higher than that of control (containing only sucrose). The microstructures of control and Bandegi containing sugar alcohols showed uniformly and finely distributed air holes. Expansion ratio and oil absorption of Yukwa containing sorbitol and 30% erythritol were higher than those of control. Appearance and cross section of control and Yukwa containing sorbitol, 30% erythritol, and 30% xylitol showed a good shape. The lightness (L) of control was significantly lower than Yukwa containing sugar alcohols, whereas redness (a) and yellowness (b) were higher than those in Yukwa containing sugar alcohols. Hardness of Yukwa containing sugar alcohols was significantly lower than that of control, and that of Yukwa containing sorbitol was the lowest. Peak number of Yukwa containing sugar alcohols was significantly lower than that of control, and that of Yukwa containing 60% erythritol and 60% xylitol was the lowest among all samples. In the sensory evaluation, color of control was deepest, whereas that of Yukwa containing 60% xylitol was lightest. Volume and air hole uniformity of Yukwa containing 60% erythritol and 60% xylitol were inferior than those of other samples. Sweetness of Yukwa containing sugar alcohols was lower than that of control, whereas oily flavor was stronger. Hardness of Yukwa containing sugar alcohols was lower than that of control, and Yukwa containing xylitol showed the lowest hardness among the samples. Crispness of Yukwa containing sugar alcohols was lower than that of control. There were no significant differences in overall acceptability between control and Yukwa containing 30% sorbitol and 30% erythritol. Overall, sorbitol and erythritol were appropriate as a 30% replacement for sucrose when preparing Yukwa.

• Journal of Animal Science and Technology
• /
• 제65권2호
• /
• pp.275-292
• /
• 2023

Nanotechnology in the food industry can increase the effectiveness of food ingredients. Nanotechnology can increase the bioavailability and absorption of bioactive compounds, enhance their stability, and improve the sensory quality of the product. Processed meat products are easily damaged due to bacterial activity. Advanced nanoemulsions as a meat preservative are nanoemulsions that can be used as preservative agents in meat products, particularly essential oil nanoemulsions, due to their antimicrobial and antioxidant properties. Its application is still limited to foods made from meat products. Therefore, this literature review examines nanoemulsion and its application in meat products and functionality improvement. Also, in the future, nanoemulsions in meat products must be made safe, and the government and businesses must work together to build consumer trust. It can be concluded that essential oil-based nanoemulsion has the potential to be used as an additive in meat products because it can kill bacteria, fight free radicals, improve flavor, and keep food fresh. Nanoemulsion is challenging in the meat industry because it can be toxic due to its tiny droplets (under 200 nm).

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.997-1002
• /
• 1995

상업적으로 제조된 키틴으로 부터 키토산을 제조할 때 반응온도, 시간, 키틴의 입자크기가 제조된 키토산의 물리 화학적 성질에 미치는 영향을 검토하였다. 78% 이상의 탈아세틸화를 시키기 위하여서는 $100^{\circ}C$에서는 6시간, $120^{\circ}C$에서는 20분, $140^{\circ}C$에서는 10분 정도를 처리하였으며 이때 생성된 키토산의 점도는 각각 180cps, 130 cps, 30 cps로 측정되었다. 또한 반응 후 잔류시간이 키토산의 점도를 감소시킴을 보였으며 키틴의 입자크기가 작은 경우에 탈아세틸화를 촉진시키며 동일한 탈아세틸화도에서 높은 점도를 유지하였다. 한편 생성된 키토산은 키틴에 비하여 수분흡수, 지방흡수성에서 차이를 보이지 않았으나 색소흡수능력은 평균 4배이상 증가하였다. IR스펙트럼에서는 전반적으로 둔화된 모습을 보였으며 특히 $1,000{\sim}1,800\;cm^{-1}$에서 흡수pattern이 둔화되었다.

• Journal of Radiation Protection and Research
• /
• 제33권1호
• /
• pp.35-40
• /
• 2008

석유화학 공정의 증류탑은 공정유체를 분리, 정제하는 중요한 장치 중의 하나로 가동효율은 설비의 생산성에 큰 영향을 미친다. 본 연구는 밀봉 감마선원을 이용하여 투과 감마선의 세기를 높이별로 측정함으로써 내부 밀도의 변화를 분석하여 공정의 가동 중 내부 상황에 대한 정보를 얻고자 하였다. 이를 위하여 한국원자력연구원에서 개발된 자동 증류탑 검사장치를 이용하여 증류탑 상부 양쪽에 밀봉 감마선원과 방사선검출기를 매달아 수직으로 내리면서 실험을 수행하였으며, 이때 감마선원으로는 Co-60 150 mCi과 방사선검출기로 BGO detector를 각각 사용하였다. 진단결과 설비 내부의 tray에는 구조적 결함이 관찰되지 않았으나, 유체분포를 고려할 때 상부는 기포층(vapor)의 밀도분포가 지배적인 반면에, 하단부에는 기포에 비해 유체가 상대적으로 많이 분포하는 것으로 계측되었다. 본 실험으로부터 밀봉 감마선원을 이용한 가동 중에 있는 대형 증류탑의 tray에 대한 구조적 건전성 및 내부 유체분포에 대한 정보를 성공적으로 제시하였다.

• 생약학회지
• /
• 제41권3호
• /
• pp.216-220
• /
• 2010

Obesity is an important risk factor that significantly increases mortality and disease rates in the cardiovascular disease, diabetes, and various diseases. So far, the most powerful way to inhibit fat absorption is pancreatic lipase inhibitors. In this study, we investigated the anti-obesity effect of the extract of Juniperus rigida. Juniperus rigida extract (JRE) had a inhibitory effect on pancreatic lipase activity ($IC_{50}$=8.63 ${\mu}g$/ml). In in vivo oil-emulsion loading test, this extract also inhibited the intestinal fat absorption. In addition, we measured inhibitory effects of JRE on activity of phosphodiesterase (PDE) and hormone sensitive lipase (HSL) among the important enzymes associated with lipolysis. JRE strongly inhibited PDE activity ($IC_{50}$=4.56 ${\mu}g$/ml), whereas inhibitory effect on HSL activity was very weak compared with orlistat. As a result, JRE inhibited the absorption of fat by inhibiting the activity of pancreatic lipase and induced lipolysis through inhibition of PDE activity. Therefore, we suggest that Juniperus rigida may be a potential therapeutic agent improving obesity.