• Title/Summary/Keyword: Oil-Water Mixture

Search Result 166, Processing Time 0.022 seconds

Thermohydrodynamic Lubrication Analysis of Turbocharger Journal Bearing Involving the Mixture of Water within Engine Oil (엔진오일에 물이 혼합될 때 터보챠져 저어널 베어링의 열유체윤활 해석)

  • Chun, Sang-Myung
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.20 no.1
    • /
    • pp.131-140
    • /
    • 2012
  • In this study, using the governing equation for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non- Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing in a turbocharger lubricated with the mixture of two Newtonian fluid, for example, water within engine oil. The results related with the bearing performance are shown that the bearing friction is to decrease and the side leakage and bearing load increase as increasing the water content in an engine oil.

Study on Bearing Performance Involving the Mixture of Water within Engine Oil in a Turbocharger Journal Bearing (터보챠저 저어널 베어링에서 물과 윤활유가 혼합될 때 베어링 성능에 관한 연구)

  • Chun, Sang-Myung
    • Tribology and Lubricants
    • /
    • v.27 no.4
    • /
    • pp.183-192
    • /
    • 2011
  • In this study, using the governing equations for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water dispersed within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing on a turbocharger lubricated with the mixture of two Newtonian fluids, water dispersed within engine oil. The results related with the bearing performance are showed that the friction force and bearing load capacity decrease as increasing the volume percent of water.

Thermohydrodynamic Lubrication Analysis of Journal Bearing on Steam Turbine Shipping Engine Involving the Mixture of Water within Turbine Oil (터빈오일과 물이 혼합될 때 증기터빈 선박엔진 저어널 베어링의 열유체윤활 해석)

  • Chun, Sang-Myung
    • Tribology and Lubricants
    • /
    • v.27 no.2
    • /
    • pp.77-87
    • /
    • 2011
  • In this study, using the governing equation for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water within turbine oil on the performance of high speed journal bearing of a steam turbine shipping engine. The governing equation is the general equation being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing in a steam turbine shipping engine lubricated with the mixture of two Newtonian fluid, for example, water within turbine oil. The results related with the bearing performance are showed.

A Study on Feasibility of Oil Separation with Oil Absorbent for Spilt Oil Recovery (흡착재에 의한 유출기름 회수용 유수분리의 가능성 연구)

  • 박외철;권병곤
    • Journal of the Korean Society of Safety
    • /
    • v.13 no.2
    • /
    • pp.39-44
    • /
    • 1998
  • An experimental study on oil absorbent was conducted to investigate the feasibility of utilizing absorbents in oil separation from water-oil mixture for spilt oil recovery. Experiments included investigations of absorptivity and filtering performance of a commercial oil absorbent for different diesel oil concentrations. The measured average absorptivity of the absorbent was above 92% for oil concentrations, 5, 10, 15vo1%, that shows good absorbing performance. Filtering the oil-water mixture, however, was too slow to be used for oil separation. An absorbent baffle system was suggested for oil separation which collects oil panicles by increasing contact between the absorbent and oil particles.

  • PDF

Effects of Oil and Sugar on SPI-Tofu Characteristics Under Model System (모델시스템에서 기름과 당이 분리대두단백 두부의 특성에 미치는 영향)

  • 김동원;구경형;최희숙;김우정
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.23 no.1
    • /
    • pp.90-97
    • /
    • 1994
  • Effect of addition of oil , sucrose, dextrin and oil-sucrose (1 : 1 w/w) mixture on SPI tofu was investigated. The characteristics measured were yield , water holding capacity , textural and organoleptic properties. THe SPI tofufwas prepared by coagulation of soyprotein isolate (SP) suspensino by CaCl$_2$ , CaSo$_4$ an dGDL , followed by compression . Addition of oil to SPI increased the tofu yield and water holding capacity, particulary for those tofu coagulated by CaCl$_2$. Eventhough dextrin addition decreased the yield, it showed the most improving effect on water holding capacity. The tofu prepared by CaSO$_4$coagulant resulted highest in yield and water holding capacity. Hardness was found to be decreased as the oil, sucrose and dextrin added more and adhesiveness, cohesiveness and guminess were also affected. The sensory evaluation showed the SPI tofu prepared by CaSO$_4$ and 10% addition of oil and sucrose mixture to be realtively high in hardness , elasticity and uniformity of the texture.

  • PDF

Characteristics of Water Separation for Oil-Water Mixture in a FWKO Vessel (FWKO 유수분리공정을 이용한 오일-물 혼합물의 분리특성)

  • Kwon, Soon-Chul;Park, Kun-YIk;Yoon, Sung-Min;Kim, Joo-Yeon;Park, Chan-Young;Bae, Wi-Sup;Rhee, Young-Woo
    • Korean Chemical Engineering Research
    • /
    • v.49 no.6
    • /
    • pp.823-828
    • /
    • 2011
  • Characteristics of water separation in a FWKO(Free Water Knok Out) vessel was investigated to remove water from oil-water mixture. Decane, toluene, and asphalt were used as model oils. Preliminary experiments were carried out for decane in a prototype FWKO vessel. Based on the results of preliminary experiments, the prototype vessel was modified and its performance was evaluated by using toluene. The effects of experimental variables on the separation of oil-water mixture were evaluated in terms of separation efficiency. The experimental variables include water cut(water ratio), number of baffles, residence times, and operation temperatures. The optimum conditions of water separation were found to be 0.8 water cut, 3 baffles, 1,200 sec, and $45^{\circ}C$.

The effect of soil addition to oil-cake on decaying of the oil-cake and its efficiency as a ferfilizer (토양(土壤)의 첨가(添加)가 유박(油粕)의 부숙(腐熟) 및 비효(肥效)에 미치는 영향에 관(關)하여)

  • Oh, Wang Keun;Cho, Byung Lyun;Lee, Ki Eui
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.4 no.2
    • /
    • pp.137-141
    • /
    • 1971
  • In order to observe the effect of soil added to oil cake in the preparation of liquid fertilizer for flower culture use, a laboratory experiment was carried out, in addition to a pot experiment done with Petunia as an indicator plant. The results obtained are as follows; 1. Faster decaying, and heavier accumulation of ammonia was observed in the mixture of soil, oil cake and water than the mixture of only oil cake and water. At the same time, the former gave better effect on the growth of Petunia than the latter. It was considered that the early raise of pH in the mixture of soil, oil cake and water stimulated the decomposition of oil cake. 2. No pH raise and a small accumulation of ammonia even at the mixture of soil, oil coke and water was observed when temperature was low, around $12-25^{\circ}C$. However, the deficiency of ammonia in the mixture of soil, oil cake and water was large enough to result in the better growth of Petunia than in the mixture without soil.

  • PDF

Effect of Nonionic Surfactant SPAN 20 on the Biodesulfurization Process by Rhodococcus sp. strain IGTS8 (비이온 계면활성제인 SPAN 20 이 Rhodococcus sp. Strain IGTS8을 이용한 미생물 탈황공정에 미치는 영향)

  • 박홍우;박기돈;오성근
    • KSBB Journal
    • /
    • v.17 no.3
    • /
    • pp.295-301
    • /
    • 2002
  • The effects of nonionic surfactant (SPAN 20) on the desulfurization process by Rhodococcus sp. strain IGTS8 have been investigated at various oil/water ratios, pHs and concentrations of surfactant. The hexadecane containing DBT was employed as model oil. The presence of surfactant in the oil/water mixture stabilized the oil/water interface, thus enhanced the efficiency of desulfurization. The volume percentages of oil in the oil/water mixture were 30, 50 and 70%. The concentrations of surfactant were varied from 0 to 0.33 wt% relative to water phase. In general, the biodesulfurization efficiencies were decreased as the concentration of SPAN 20 and the volume percentage of oil phase increased.

Bioremediation Potential of a Tropical Soil Contaminated with a Mixture of Crude Oil and Production Water

  • Alvarez, Vanessa Marques;Santos, Silvia Cristina Cunha dos;Casella, Renata da Costa;Vitae, RonaIt Leite;Sebastin, Gina Vazquez;Seldin, Lucy
    • Journal of Microbiology and Biotechnology
    • /
    • v.18 no.12
    • /
    • pp.1966-1974
    • /
    • 2008
  • A typical tropical soil from the northeast of Brazil, where an important terrestrial oil field is located, was accidentally contaminated with a mixture of oil and saline production water. To study the bioremediation potential in this area, molecular methods based on PCR-DGGE were used to determine the diversity of the bacterial communities in bulk and in contaminated soils. Bacterial fingerprints revealed that the bacterial communities were affected by the presence of the mixture of oil and production water, and different profiles were observed when the contaminated soils were compared with the control. Halotolerant strains capable of degrading crude oil were also isolated from enrichment cultures obtained from the contaminated soil samples. Twenty-two strains showing these features were characterized genetically by amplified ribosomal DNA restriction analysis (ARDRA) and phenotypically by their colonial morphology and tolerance to high NaCl concentrations. Fifteen ARDRA groups were formed. Selected strains were analyzed by 16S rDNA sequencing, and Actinobacteria was identified as the main group found. Strains were also tested for their growth capability in the presence of different oil derivatives (hexane, dodecane, hexadecane, diesel, gasoline, toluene, naphthalene, o-xylene, and p-xylene) and different degradation profiles were observed. PCR products were obtained from 12 of the 15 ARDRA representatives when they were screened for the presence of the alkane hydroxylase gene (alkB). Members of the genera Rhodococcus and Gordonia were identified as predominant in the soil studied. These genera are usually implicated in oil degradation processes and, as such, the potential for bioremediation in this area can be considered as feasible.

Development of a Forced-Vortex Oil-Water Separator (강제와류 유수분리기의 걔발)

  • 박외철;이광진
    • Journal of the Korean Society of Safety
    • /
    • v.12 no.2
    • /
    • pp.22-26
    • /
    • 1997
  • A small scale centrifugal oil separator consisted of two concentric tubes was fabricated for spilt oil recovery. With speed control of the inner tube, its performance of oil separation was investigated. Oil-water mixture is separated by forced vortex motion with the rotating inner tube. Velocity and pressure distributions in the tubes were calculated. Control of rotating speed, which is the most influencing parameter, showed an optimum value 946rpm corresponding to the acceleration of 20g at the inner tube surface. Separation performance was suddenly deteriorated at rotating speed higher than 1200rpm.

  • PDF