• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.211-217
• /
• 2006

Ring and groove wear may not be a problem in most current automotive engines. However, a small change in ring face and groove geometry can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face, ring groove and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Being based on the calculation of gas flow amount by the theory of piston ring dynamics and gas flow, and the calculation of oil film thickness and friction force by the analysis of piston ring lubrication, the calculation theory of oil amount through top ring gap into combustion chamber will be set. This is estimated as engine oil consumption. Furthermore, the wear theories of ring, groove and cylinder bore are included. Then the each amount of wear is to be obtained. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. Next, the calculated amount of oil consumption and wear are compared with the guideline of each part's wear and oil consumption. So, the timing of part repair and engine life cycle can be predicted in advance without performing engine durability test. The wear data of rings and grooves are obtained from three engines before and after engine durability test. The calculated wear data of each part are turn out to be at the lower bound of aver-aged test values or a little below.

• 한국수산과학회지
• /
• 제21권4호
• /
• pp.232-238
• /
• 1988

As a part of the studies on effective utilization of polyunsaturated lipids in sardine (Sardinops melanosticta), when the refined sardine oil was mixed with soybean and other vegetable oils storage stability and the effect to the quality of the product was investigated. Addition of 1 volume of refined sardine oil to 4 volumes of soybean oil was recommended to yield 3 in P/S ratio and 1.5g of eicosapentaenoic and docosahexaenoic acid per 40g of the mixed oil for a good storage stability and as a dietary source of EPA requirement for atherosclerotic disease. When the unpurified vegetable oils, sesame oil and perilla oil, were mixed with the same volume of refined sardine oil the content of n-3 fatty acids was increased to $13.36\%\;and\;30.65\%\;%\;from\;0.27\%$ in sesame oil and $29.72\%$ in perilla oil. The n-3/n-6 ratios were also raised to 0.476 and 1.433 from 0.006 and 0.876. And these mixed oils were more stabilized than the refined sardine oil during storage at $30^{\circ}C$.

• 셀메드
• /
• 제5권4호
• /
• pp.28.1-28.6
• /
• 2015

This current study investigated the anti-ulcer activity of 2 types of virgin coconut oil (VCO-A and VCO-B) and coconut oil (CO). Sprague-Dawley of male rats divided into 6 groups and each group consisted of ten rats. Rats were then treated with either VCO or CO and then were then anaesthetized and pyloric ligation was performed. The anaesthesia was discontinued and the animal usually recovered consciousness within less than an hour. Three hours later, the animal was then again anaesthetized and sacrificed with chloroform. Stomach removed and its content subjected to measurement of volume and pH. The results revealed VCO-B and VCO-A (100%) significantly inhibited (p < 0.001) the volume of gastric juice secreted by the control rats by 66.81% and 51.53%, respectively. Followed by CO 42.80%. While the inhibition of gastric juice for positive control rats which treated with ranitidine (100 mg/kg) was only 22.38%. The total acid output was reduced by the oils to 70.80%, 74.16% and 40.45% for VCO-A, VCO-B and CO respectively compared to control group. Ranitidine reduced the total acid output by 34.83%. In conclusion, prevention of gastric lesions in rats by VCO was found to increase the mucous and decrease the acid volume, total acid contents and ulcer scoring. The treatment of VCO affects the all parameters that influence the initiation and perpetuation of ulceration.

• The Journal of Asian Finance, Economics and Business
• /
• 제3권3호
• /
• pp.79-91
• /
• 2016

This paper is the first of its kind using a non-linear approach based on cross-correlation function (CCF) to investigate the information arrival hypothesis in crude palm oil (CPO) futures market. Based on daily data from 1986 to 2010, our empirical results reveal that: First, the volume of volatility is not a proxy of information flow. Second, dependence causality running from current return to future volume in conditional variance exhibit an asymmetric pattern of time span with different signs of correlation between price and volume series. This finding indicates the presence of noise traders' hypothesis of price-volume interaction in CPO futures market. Both findings suggest that this futures market is weak-form inefficiency. In terms of investors' behavior, they tend to change their expectations on current return based on errors made in previous trade in generating abnormal volume in the subsequent period. As implied, it is advisable for the investors devise their future trading strategies according to time span and changes of return.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.33-34
• /
• 2005

The internal state of an automotive engine is very severe. A piston exposes burnt gas of over $2000^{\circ}$ nd is shocked by high pressure at the time of explosion. Furthermore strong friction is caused by high speed motion. A study on the cooling of the piston requires because the cooling and lubrication of the piston has an effect on the life and efficiency of engine directly. The previous system of oil jet cooled only the bottom of the piston. In order to improve the cooling efficiency, the oil gallery is made inside the piston, and oil flows into the oil gallery. The flow rate of oil at the entrance of oil gallery is important because of the cooling efficiency. The purpose of this study is the investigation of fluid flow characteristics of oil jet and flow rate into the oil gallery.

• 수산해양기술연구
• /
• 제20권2호
• /
• pp.127-132
• /
• 1984

(1) 디이젤기관용 대체연료로서 혼합유가 디이젤유의 연료에 대한 특성을 검토하였다. (2) 혼합유로서 디이젤기관을 운전할 경우 배기가스량은 디이젤유보다 평균 8% 정도 많음을 나타내었다. (3) 혼합유로서 디이젤기관을 운전할 경우 디이젤유에 비하여 연료소비량이 약 3% 정도 증가하였다. (4) 정미열효율에 있어서는 디이젤유와 혼합유는 거의 비슷한 상태를 나타내었다.

• 수산경영론집
• /
• 제31권1호
• /
• pp.115-133
• /
• 2000

The policy of suppling tax-exempt fishery oil in Korea has a history of almost 40 years, which was initiated by the National Federation of Fisheries Cooperatives in 1965. In 1999 the volume of fishery oil supplied to the earning fishermen and fishing entrepreneurs amounted to 8,390 thousand DM, 500 billion won in total. This paper analyzes the oil supplying system to fishermen in Korea and shows that the structural obstacles to the stable provision of fishery oil lies in the ineffective bargaining power (fixing price). Provided that the NFFC as a buyer, which is not equipped with the storage facilities for oil bids for a unit-price contract of fishery oil, there exists a possibility of collusion among 5 local oil refineries corporations to influence the oil price, making it difficult to reach a resonable price of oil. Though the international bids and direct imports following the liberalization of oil imports would help lower the unit price, purchasing and importing the oil out of season at a lower price would not be guaranteed without the oil storage facilities. Furthermore, the current supply system of oil is quite vulnerable to the extraneous factors and, say when the oil price soars unpredictably, it is almost impossible to supply low - priced fishery oil to fishermen. The National Federation of Fisheries Association of Japan(Zengyoren), for instance, possesses 10 oil storage facilities, which had been built across the country during the last 20 years (1964-1984). The storage capacity of these facilities reaches 0.6million DM(by kind, 0.56million DM for A heavy oil, 38thousand D/M kerosene, 5thousand D/M for diesel fuel oil). Allowing no intermediary of production associations(fisheries cooperatives) the NFFA's capacity for keeping oil in reserve rises much higher. As these storage facilities can keep the oil amounting to as much as of 70 days demand in reserve, a stable supply of fishery oil on favorable terms is secured. In contrast with Japan case, unequipped with the storage facilities for fishery oil, Korea does not have much bargaining power for bringing down the price of fishery oil. To make matters worse, the oil storing capacity of the member cooperatives is the volume of only 8 days demand. In case the oil price rises, it is almost impossible to supply the oil to the fishermen at a price lower than the price risen.

• 수산해양기술연구
• /
• 제32권2호
• /
• pp.148-156
• /
• 1996

The combustion characteristics of diesel oil and fish oil blended with diesel oils were investigated at various blending rate of fish oil in diesel engine and constant volume combustion bomb. The evaporation and combustion duration of diesel oil and fish oil blended with diesel oils were respectively different high and low temperature. The dependence of ignition delay on the temperature was different in high and low temperature ranges which were divided at the 773K. The ignition delay become longer than that of diesel oil as the blending rate of fish oil increases, and its difference were larger at different loads. The densityof smoke was lower as the blending rate of fish oil increases, and the rate offuel consumption showed no significant difference between diesel oil and fish oil blended with diesel oils.

• Journal of Nutrition and Health
• /
• 제26권5호
• /
• pp.524-531
• /
• 1993

In this experiment, we investigated the changes of erythrocyte feature and Ca concentration in rat fed the diet containing different common oils in Korea for different feeding periods(4 weeks or 12 weeks), using Korea sesame oil, perilla oil, rice bran oil and mixed oil. W-3/w-6 ratio of each group was 0.001, 1.44, 0.03 and 0.112, respectively. P/S ratio of each group was 9.64, 10.49, 5.58 and 1.68, respectively. Perilla oil(w-3 rich) increased w-3/w-6 ratio of erythrocyte membrane, decreased the amount of trapped Ca and inhibited the decrease of cell volume. These results indicate that in maybe increase erythroyte fluidity and deformability, and affect erythrocyte function. In conclusion, w-3 rich perilla oil affects erythrocyte feature.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).