• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.471-478
• /
• 2009

The specific some types of compressors are appropriate for a use in hydrogen gas station. Metal diaphragm type of hydrogen compressor is one of them, which can satisfy the critical requirements of maintaining gas purity and producing high pressure over 850 bar. The objective of this study is to investigate an characteristics of compression through two-way Fluid-Structure-Interaction (FSI) analysis as bulk modulus and initial volume of oil independently varies. Deflection of diaphragm, oil density, gas and oil pressure were analyzed during a certain period of compression process. According to the analysis results, bulk modulus and initial volume remarkably affected deflection of diaphragm, oil density, gas and oil pressure. The highest gas pressure were attained with the highest bulk modulus of $7e^9\;N/m^2$ and the lowest initial oil volume of 80 cc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.67-69
• /
• 2012

This paper is to investigate the effect of waste oil on the fundamental properties of high volume fly ash concrete depending on W/B and waste oil contents. Test results reveals that the use of waste oil resulted in an increase of slump and a decrease of air contents due to the presence of emulsion in waste oil. And it is found that the addition of waste oil does not affect the strength development of the concrete significantly.

• 수산해양기술연구
• /
• 제28권2호
• /
• pp.184-190
• /
• 1992

The combustion characteristics, ignition delay, p-t, dp/dt, Q-t of diesel oil and fish oil blended diesel oils was investigated according to pressure and temperature in a constant volume combustion bomb. The results are as follows: 1) The influence of temperature and pressure on the ignition delay was almost constant in high temperature, regardless of the blending rates, and the ignition delay was shortest in the 60% blend. 2) The maximum pressure was high in order of with pure diesel oil, with the 20% blend and the 60% blend. 3) The rate of pressure rise was high in order of with pure diesel oil, with the 20% blend and the 60% blend. The rate of maximum pressure rise was significantly higher with pure diesel oil than with two blends. 4) The amount of accumulative heat release was large in order of with pure diesel oil, with the 20% blend and the 60% blend.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.178-184
• /
• 2011

The analysis of reaction kinetics provided that the reaction order was the $1^{st}$ of triglyceride and the rate constant was 0.067 $min^{-1}$. The transesterification of camelina oil using 0.6 wt% mixed catalyst which consists of 40 v/v% of potassium hydroxide (1 wt%) and 60 v/v% of tetra methyl ammonium hydroxide (0.8 wt%), was carried out at $65^{\circ}C$ on the tubular reactor packed with static mixer. The conversion was shown to be 95.5% at the 6:1 molar ratio of methanol to oil, flow rate of feed of 3.0 mL/min and 24 of element of static mixer. The volume of washing water emitted by 0.6 wt% mixed catalyst was the half of the volume emitted by 1 wt% potassium hydroxide.

• 해양환경안전학회지
• /
• 제19권5호
• /
• pp.467-475
• /
• 2013

해양 기름오염 방제조치에 관한 연구의 일환으로 정량적 기초자료를 확보하기 위하여 최근 10년간(2003~2012년) 국내 연안에서 발생한 기름오염사고에 관한 통계자료를 수집하여 연간 기름오염사고 건수와 연간 기름 유출량을 사고 원인(Cause)별, 오염원(Source)별, 해역(Sea area)별로 분석하였다. (1) 사고 원인별로 분석한 결과, (1) 부주의로 인한 사고 건수(1,429건)와 해양사고로 인한 사고 건수(790건)가 각각 전체 건수(2,833건)의 50.4 %와 27.9 %를 차지하였다. 그리고 해가 거듭될수록 해양사고로 인한 사고 건수는 감소하는 경향을 보인 반면에 부주의로 인한 사고 건수는 증가하는 경향을 보였다. (2) 해양사고로 인한 유출량(17,400 kL)이 전체 기름 유출량(17,877 kL)의 97.3 %를 차지하였고 부주의로 인한 기름유출량(294 kL)이 1.7 %를 점유하였다. (2) 오염원별로 분석한 결과, (1) 어선에 의한 사고건수(1,210건)가 전체 건수(2,833건)의 42.7 %, 기타 선박에 의한 사고 건수(620건)가 21.9 %, 화물선에 의한 사고 건수(367건)가 13.0 %, 유조선에 의한 사고 건수(261건)가 9.2 %를 차지하였다. 해가 거듭될수록 어선에 의한 사고 건수는 감소하는 경향을 보였지만 여전히 높은 수치를 보인 반면에 화물선과 기타 선박에 의한 사고 건수는 완만하게 증가하는 경향을 보였고 유조선에 의한 사고 건수는 연간 13~37건으로 해마다 크게 변동하였다. (2) 유조선의 기름 유출량(15,488 kL)이 전체 기름 유출량(17,877 kL)의 86.7 %를, 기타 선박의 기름 유출량(898 kL)이 5.0 %를, 화물선의 기름 유출량(733 kL)이 4.1 %를, 어선의 기름 유출량(590 kL)이 3.3 %를 차지하였다. (3) 해역별로 분석한 결과, (1) 남해에서의 사고 건수(1,613건)와 기름 유출량(3,804 kL)은 전체 사고 건수의 56.9 %와 전체 기름 유출량의 21.3 %를, 서해에서의 사고 건수(700건)와 기름 유출량(13,501 kL)은 전체 사고 건수의 24.7 %와 전체 기름 유출량의 75.5 %를, 동해에서의 사고 건수(520건)와 기름 유출량(572 kL)은 전체 사고 건수의 18.2 %와 전체 기름 유출량의 3.2 %를 차지함으로써 사고 건수에서는 남해가 최고였고 기름 유출량에서는 2006년까지는 남해가 최고(1위)였으나 2007년 유조선 Hebei Spirit호 기름유출사고 이후에는 서해가 최고(1위)였으며, 동해에서의 사고 건수와 기름 유출량이 모두 남해나 서해보다 적은 값으로 나타났다. (2) 해가 거듭될수록 동해와 남해에서의 사고 건수와 기름 유출량이 모두 감소하는 경향을 보인 반면에 서해에서는 사고 건수가 연도별 증감의 변동 폭이 적어 거의 일정한 경향을 보였으며 기름 유출량은 연도별로 증감의 변동 폭이 컸다.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.602-611
• /
• 2013

We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.83-89
• /
• 2015

In Korea for 20 years(1993-2012), total number and average annual number of oil spills were 6,608 cases and total volume and average annual volume of oils spilt were $57,328k{\ell}$ and nearly $2,866k{\ell}/year$, respectively. The annual number of oil spills and annual amount of oil spilt tended to decrease with the lapse of year in Korea. As oil transportation worldwide continues to increase, many communities are at risk of oil spill disasters and must anticipate and prepare for them. Factors that influence oil spill consequences are myriad and rage from the biophysical to the social. In this paper, we analysed the emergency response systems and recovery apparatuses for oil spill accident in marine and proposed a developed oil diffusion apparatus which can be used to initial response stage by crew, and to extend golden times. This system can be minimized casualties for rescued people in disaster.

• Carbon letters
• /
• 제14권3호
• /
• pp.193-195
• /
• 2013

Expanded graphite (EG) was prepared using a drying process for application as an oil-adsorbent: the morphology, expansion volume, and oil absorption capacity of the EG were investigated. The expanded volume of the EG increased with an increasing reaction time and heat treatment temperature. The oil adsorption capacity of the EG was 45 g of n-dodecane per 1 g of EG. It is noted that the drying process of EG is a useful technique for a new oil-adsorbent.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.11-16
• /
• 2003

Recently, CNC lathe is in need of higher speed for precision works. So more intensive and compact heat exchanger is necessary to cool down the heat in short time from drills and works during high speed working. In this study, to increase heat transfer coefficient per unit volume, inner groove tube is designed and compact oil cooler, 57% volume of conventional type, is manufactured. The heat transfer performance is experimented and is compared with the performance of conventional type.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.143-150
• /
• 2007

Ring and cylinder bore wear may not be a problem in most current automotive engines. However, a small change in ring face and cylinder bore diameter can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Here, the oil amount through top ring gap into combustion chamber is estimated as engine oil consumption. Furthermore, the wear theories of ring and cylinder bore are included. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. The wear data of rings and cylinder bore are obtained from three engines after engine durability test. The calculated wear data of each part are turn out to be around the band of averaged test values or a little below. It is shown that the important factor regarding oil consumption increasement is the wear of ring face.