• Wind and Structures
• /
• v.5 no.6
• /
• pp.515-526
• /
• 2002

The wind flow over two-dimensional sinusoidal hilly obstacles with slope (the ratio of height to half width) of 0.5 has been investigated experimentally and numerically. Experiments for single and double sinusoidal hill models were carried out in a subsonic wind tunnel. The mean velocity profiles, turbulence statistics, and surface pressure distributions were measured at the Reynolds number based on the obstacle height(h=40 mm) of $2.6{\times}10^4$. The reattachment points behind the obstacles were determined using the oil-ink dot and tuft methods. The smoke-wire method was employed to visualize the flow structure qualitatively. The finite-volume-method and the SIMPLE-C algorithm with an orthogonal body-fitted grid were used for numerical simulation. Comparison of mean velocity profiles between the experiments and the numerical simulation shows a good agreement except for the separation region, however, the surface pressure data show almost similar distributions.

• Journal of Mechanical Science and Technology
• /
• v.14 no.4
• /
• pp.456-465
• /
• 2000

An experiment was conducted to investigate the aerodynamic losses of high pressure steam turbine nozzle (526A) subjected to a large range of incident angles ($-34^{\circ}\;to\;26^{\circ}$) and exit Mach numbers (0.6 and 1.15). Measurements included downstream Pitot probe traverses, upstream total pressure, and end wall static pressures. Flow visualization techniques such as shadowgraph and color oil flow visualization were performed to complement the measured data. When the exit Mach number for nozzles increased from 0.9 to 1.1 the total pressure loss coefficient increased by a factor of 7 as compared to the total pressure losses measured at subsonic conditions ($M_2<0.9$). For the range of incidence tested, the effect of flow incidence on the total pressure losses is less pronounced. Based on the shadowgraphs taken during the experiment, it' s believed that the large increase in losses at transonic conditions is due to strong shock/ boundary layer interaction that may lead to flow separation on the blade suction surface.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.2
• /
• pp.97-104
• /
• 2007

In different approaches were extracted from evening primrose seed by supercritical fluids carbon dioxide and for comparison with hexane as solvent. The extracts have been analyzed qualitatively and quantitatively to evaluate yield and selectivity of ${\gamma}$-linolenic acid. The yields extracts with supercritical fluids carbon dioxide were higher than those with hexane. When this process produces commercially, will get a many economic profit.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.99-102
• /
• 2002

전기분해에 의한 부상현상을 이용하여 토양세정 후 발생되는 유출수 중의 유수를 분리하기 위한 적정 운전조건에 관하여 고찰하였다. 전압에 의한 유수분리 효율을 관찰한 결과, 전기분해 1시간 후 3V의 전압만으로도 88% 정도의 제거율을 나타내었으며 6V 이상의 전압에서는 90% 정도로 거의 비슷한 제거율을 나타내어 대부분의 에멀젼이 분리됨을 확인할 수 있었다. 동일조건에서는 전기분해 시간이 경과될 수록 분리효율이 향상되었으며, 전극 간격이 넓어질수록 같은 효율을 얻기 위해 소요되는 전압의 크기가 커짐을 알 수 있었다. 전기분해 시 양극에서는 OH$^{-}$의 방전으로 발생되는 산소에 의해 산화반응이 일어나며, 음극에서는 H$^{+}$가 방전되어 발생되는 수소에 의해 환원반응이 일어나며 미세한 기포가 형성된다. 유분의 부상분리 현상은 유분의 (-)charge와 전기분해에 의해서 발생되는 양이온의 결합으로 인한 중화반응 및 음극에서 발생되는 미세 수소기포로 인만 부상분리가 대부분을 차지하며, 전압 및 전기분해 시간이 증가하고 전극 간격이 좁을수록 음극에서 발생되는 미세기포의 양이 증가되어 부상효과가 크게 나타나는 것으로 판단된다. 전극 종류는 구리 > 알루미늄 > 철 > 티타늄 순으로 효율을 나타내었으며, 이는 양극으로 사용된 이러한 금속들의 전기전도도 차이에 의해 일어나는 현상으로 판단된다

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.52-62
• /
• 1997

Abstract Polyurethanes have been designed and fabricated into membranes with unique separation properties. Moreover, polyurethane microcapsules also have been reported actively as controlled release materials for their excellent blood compatibility, tensile strength and permeability. In this study, polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of a few important process conditions on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated.

• Fibers and Polymers
• /
• v.3 no.2
• /
• pp.68-73
• /
• 2002

In this study, a new type of Aliquat 336/PVC membrane has been made for extraction experiments. This new membrane is capable of holding more Aliquat 336 than previously developed extraction membranes, hence overcoming a major problem that has confronted many researchers for a long time. The new membrane has been used try investigate the rate of extraction fur the Cd(II) ion in 2.0 M HCI solution and the effect of membrane thickness on the rate of extraction. The experimental results have shown this new membrane has a promising future in relevant industrial applications. A new method is also used in this study to qualitatively identify the oily substance on the surface of membrane after the extraction experiment was completed. This oily substance has been found to be Aliquat 336.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.106-114
• /
• 1963

The products from polymer pyrolysis at $450^{\circ}$ are cooled with ice, then liquid and gaseous portions are analysed by gas chromatography. Di-2-ethyl hexyl sebacate column, silicone oil column, silica gel column and tetraethyleneglycol dimethylether column, which was most effective for the separation of hydrocarbon gases, are used. Identification of isomers could be secured more effectively by gas chromatography than mass spectrometry. Elucidation of the mechanism for thermal decomposition of polymers could be done through the identification of pyrolysis products. Although more extensive work is needed, some patterns of polymer pyrolysis are discussed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.10a
• /
• pp.27-28
• /
• 1991

열유도 상분리법 (Thermally-Induced Phase Separation, TIPS)에 의하여 미세 다공성 중공사막을 제조하였다. 막소재로는 폴리프로필렌(PP)을, 회석제로는 천연산 대두유(soybean oil), 올레인산(oleic acid), 리놀레인산(linoleic acid) 등을 사용하였다. 각 system 별로 DSC를 사용하여 열분석을 하여 분당 10$\circ$C 의 냉각속도에서 phase diagram을 얻었다. 그림 1에서 보인 바와 같이 각 system 모두 monotectic composition 이하에서 수평한 결정화 곡선을 나타내고 있으며, 이는 액체-액체 상분리 system의 특징이다. Monotectic composition은 PP/대두유 system의 경우 PP중량비로 65%, PP/올레인산 system의 경우 60%, PP/리놀레 인산 system의 경우 75%였으며, polymer가 PP로 고정된 상태에서 회석제의 극성(polarity)이 증가함에 따라 monotectic PP composition이 증가하는 경향을 나타내고 있다.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.297-303
• /
• 1974

An investigation has been performed to find an effective separation method of steriols and tocopherols from the deodorized condensates of vegetable oils. Simple heating of the starting mixture isolated the oil layer from water, and the former was collected. It was then methyl esterified followed by a distillation for the removal of fatty acid. The ensuing step was to saponify the residue. The unsaponifiable matter was extracted by both methanol and concentrated. The sterol was crystallized by cooling such concentrated solution. To obtain tocopherol, the mother liquor was first dissolved in methanol. Cooling this solution to $-20^{\circ}C$ trapped fatty acid which was filtered out. The filtrate was then treated with ion exchange resin.

• Journal of Life Science
• /
• v.10 no.2
• /
• pp.115-124
• /
• 2000

The present study was undertaken to separate the available components effectively, such as tetrodotoxin(TTX), docosahexaenoic acid(DHA, C22:6,ω-3) and eicosapentaenoic acid (EPA, C20:5,ω -3) from pufferfish liver waste, which are known to have high values as bioactive materials. By using ultrafiltration, it was possible to separate high contents of 68mg TTX from pufferfish liver waste. In contrast, by activated charcoal column, it was to obtain about 54mg TTX. The recovering ratios were 65.3% and 45.0% in the two different methods of ultrafiltration and activated charcoal column, respectively. From the results of HPLC and gas chromatography-mass spectrometry(GC-MS), the obtained toxins were identified to be TTX and its derivatives. In addition, it was also possible to obtain 72.3g DHA and 11.4g EPA from 1kg of pufferfish liver by high performance liquid chromatography (HPLC). These amounts of DHA and EPA were also 17.70% and 1.04% in the total lipid of pufferfish liver oil from analysis of gas chromatography(GC), respectively.