• 환경위생공학
• /
• 제19권2호
• /
• pp.7-14
• /
• 2004

This paper was investigated to clarify the possibility of ammonia-gas removal by essential oil. First of all, the chemical analysis was performed to analyze the composition of an essential oil by GC-MS. The monoterpenes in an essential oil react with ammonia by neutralization and their reaction mechanism was elucidated. Based on their chemical neutralized reaction, the removal efficiencies of ammonia gas were studied to derive the optimal conditions in the scrubber tower such as optimal temperature and pH. The experimental result shows that the removal efficiency of ammonia gas was achieved over 80 % by the misty aerosol dispersion of scrubber tower.

• 한국경제지리학회지
• /
• 제5권1호
• /
• pp.5-24
• /
• 2002

본 연구는 경질제품의 유통구조와 물류체계를 공간적 관점에서 분석하였다. 석유제품은 정유사, 대리점, 주유소의 유통기관들을 통해서 공급되지만, 제품의 특성과 용도별로 상이한 유통경로를 갖고 있다. 석유제품의 수송은 정유공장에서 주요 소비지역에 입지하고 있는 저유소까지의 1차 수송과 주유소로부터 주유소나 중소수요처까지의 2차 수송으로 이루어진다. 1차 수송에는 유조선, 유조화차, 송유관, 유조차가 이용되고, 대리점이나 수송용역 업체가 담당하는 2차 수송은 대부분 유조차가 수송을 전담하고 있다. 본 논문에서는 SK와 LG 정유사의 저유소 분포와 저유소 유형별 공급권역을 분석하였다. 또한 하나의 저유소가 관할하는 공급권역내에 포함된 인구수와 자동차수, 주유소수를 도출하였고, 이를 바탕으로 하나의 주유소가 공급을 담당하는 최소요구치 수요인 인구수와 자동차수를 산출하였다.

• 전기의세계
• /
• 제29권8호
• /
• pp.532-537
• /
• 1980

Effect of Argon and Sulfur hexafloride in the transformer oil are experimented under non-uniform A.C. electric field. The result has shown that the corona frequency and corona charge quantity in liquid dielectrics were varied with gas condition in the oil and affected by the additives. SF$_{6}$ that has the effects of pressure and electrical negative characteristic is the most effective. The corona is considered to be the breakdown of bubble produced by gas contained in the oil or by dissociated ion of the oil molecules.s.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.53-58
• /
• 2013

비에스테르화 대두유의 활용 가능성을 평가하기 위해 현재 대부분의 디젤 자동차에 채택되어 있는 전자 제어 분사식 과급디젤기관에 경유, 에스테르화 바이오 디젤유 5% 및 비에스테르화 대두유 5% 혼합유를 사용하여 성능 실험을 실시하였다. 그 결과, 에스테르화 바이오 디젤유 5%와 비에스테르화 대두유 5%의 연소성능이 대부분 비슷하지만 NOx는 비에스테르화한 것이 더 적게 배출되었고 이는 Fuel NO에 의한 것을 밝혔다.

• 터널과지하공간
• /
• 제23권6호
• /
• pp.538-546
• /
• 2013

본 보고에서는 석유산업에서 석유 및 가스의 생산성과 회수율을 극대화시키기 위한 방안의 하나인 수압파쇄기술에 대하여 다루고 있다. 수압파쇄기술은 인위적으로 저류층에 균열을 발생시켜 발생된 균열을 통해 저류층 유체의 유정 내 유입을 용이하게 하는 방법으로, 최근 셰일가스나 오일셰일과 같은 비전통석유가스 개발에서 널리 사용되고 있다. 수압파쇄는 크게 세 가지 단계의 과정을 통해 이루어지며, 효율적인 수압파쇄 설계를 위해 제안된 모델과 수압파쇄 후 결과를 분석, 평가하는 방법에 대해 소개하고 있다. 또한 수압파쇄과정에서 발생하는 다양한 문제점과 이를 해결하는 데 필요한 저류층 암반역학에 대해서도 간략하게 다루고 있다.

• 센서학회지
• /
• 제27권2호
• /
• pp.118-125
• /
• 2018

An evaluation system for an electronic-nose concept using three types of metal oxide gas sensors that react similarly to the human olfactory cells was constructed for the quantitative and qualitative evaluation of aroma fragrances. Four types of aroma fragrances (lavender, orange, jasmine, and Roman chamomile), which are commonly used in aromatherapy, were evaluated. All the gas sensors reacted remarkably to the aroma fragrances and the good correlation of r=0.58-0.88 with the aromatic odor intensities by olfaction was confirmed. From the results of the analysis of an electronic-nose concept for classifying the characteristics of aroma oil fragrances, aroma oils could be classified using the fragrance characteristics and oil extraction methods with the cumulative variability contribution rate of 95.65% (F1: 69.65%, F2: 26.03%) by principal component analysis. In the pattern recognition based on the artificial neural network, the four aroma fragrances were 100% recognized through the training data of 56 cases (70%) out of 80 cases, and the pattern recognition rate was 57.1%-71.4% through the validation and testing data of 24 cases (30%). The pattern recognition success rate through all confusion matrices was 82.1%, indicating that the classification of aroma oil fragrances using the three types of gas sensors was successful.

• 설비공학논문집
• /
• 제23권4호
• /
• pp.243-250
• /
• 2011

In order to investigate the effects of PAG oil concentration on heat transfer performance and pressure drop during gas cooling process of $CO_2$, the experiments on fin-tube heat exchanger of $CO_2$ heat pump were performed. The experimental apparatus consists of a gas cooler, a heater, a chiller, a mass flow meter, a pump and measurement system. Experiments were conducted in various experimental conditions, which were inlet temperature($110^{\circ}C$), mass flow rates (50, 55, 60, 65, 70 g/s) and PAG oil concentration(0 to 2.6 wt%). Heat transfer rate decreased with the increase of the oil concentration and the decrease of inlet pressure. And pressure drop increased with the increase of the oil concentration and mass flow rate of refrigerant. The COP reduction by deterioration of gas cooler performance with oil concentration was analyzed. When inlet pressure of gas cooler is 100 bar, the COP reduction was estimated by 6% under 1 wt% of oil concentration.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.471-478
• /
• 2009

The specific some types of compressors are appropriate for a use in hydrogen gas station. Metal diaphragm type of hydrogen compressor is one of them, which can satisfy the critical requirements of maintaining gas purity and producing high pressure over 850 bar. The objective of this study is to investigate an characteristics of compression through two-way Fluid-Structure-Interaction (FSI) analysis as bulk modulus and initial volume of oil independently varies. Deflection of diaphragm, oil density, gas and oil pressure were analyzed during a certain period of compression process. According to the analysis results, bulk modulus and initial volume remarkably affected deflection of diaphragm, oil density, gas and oil pressure. The highest gas pressure were attained with the highest bulk modulus of $7e^9\;N/m^2$ and the lowest initial oil volume of 80 cc.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.76-81
• /
• 1997

The lubrication characteristics of high-speed roller bearings at oil-starvation have been investigated empirically using the bearings employed in small industrial gas turbine engines. Testing was done by simulating the oil-starvation conditions in engines, such as stopping the oil-supply to the bearing during normal operating, starting without oil-supply at atmospheric temperature, and accelerating with oil-supply at atmospheric temperature. During testing, the temperature of bearing, the power consumption, and the rotating resistance of the bearing were measured. From this study, on the contrary to the ball bearing, it was found that the resistance of the bearing was higher at the regime of without oil-supply than that at the regime of with oil-supply, despite less power consumption.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.269-272
• /
• 2006

The use of packaged skid in oil and gas plant has increased dramatically over the decades, replacing loose supply equipment. Most equipment is installed on structural skid in manufacturer's shop. As Oil and Gas Plants are constructed at inaccessible area, the demands of packaged skids are increased. The packaged skid have advantages comparing to loose supply equipment in inaccessible area. The packaged skid is small complex plant consists of process, mechanical, piping, instrument, electrical and structural steel. This paper examines advantages and problems of packaged skid, based on previous experience. EPC company consider key factors such as manufacturing period, construction periods, equipment quality and costs.